codex-collab

name	codex-collab
description	Use when the user asks to invoke, delegate to, or collaborate with Codex on any task. Also use PROACTIVELY when an independent, non-Claude perspective from Codex would add value — second opinions on code, plans, architecture, or design decisions.

codex-collab

codex-collab is a bridge between Claude and Codex. It communicates with Codex via the codex app-server JSON-RPC protocol, giving you structured, event-driven access to Codex's capabilities — prompting, code review, tool use, and file editing. Requires bun and the codex CLI on PATH (codex-collab health to verify).

Run Command (Recommended for Prompted Tasks)

The run command handles prompted tasks in one call: starts a thread, sends the prompt, waits for the turn to complete, and prints output.

# Research task
codex-collab run "what does this project do?" -s read-only --content-only

# Implementation task
codex-collab run "add input validation to the login form" --content-only

# Resume an existing thread (preserves conversation context)
codex-collab run --resume <id> "now check the error handling" --content-only

# Specify working directory (omit -d if already in the project dir)
codex-collab run "investigate the auth module" -d /path/to/project --content-only

# Long or quote-riddled prompt: pass it on stdin with `run -` (no shell-quoting hazards)
cat prompt.md | codex-collab run - --content-only

IMPORTANT — Execution rules for ALL codex-collab Bash commands:

• Always use dangerouslyDisableSandbox=true — the tool writes to ~/.codex-collab/ which is outside the sandbox allowlist.
• For run and review: also use run_in_background=true — these take minutes. After launching, tell the user it's running and end your turn. While running: do NOT poll, block, wait, or spawn an agent to monitor — you will be notified automatically when the task finishes. If other tasks complete while Codex is running, handle them normally without checking on Codex. When notified: surface the result per Context Efficiency & Result Visibility below.
• run --detach returns in seconds — run it in the foreground.
• follow on a live run blocks until that run completes, and follow --watch never exits: both are primarily the user's view for their own terminal pane — don't run --watch yourself. The one agent-facing use: follow <id> in background Bash is the completion signal for a detached run (see Detached Runs below). follow on an already-finished run is a quick foreground replay.
• next blocks until something needs a response — run it in the background; its exit is your notification (see the next section below).
• All other commands (kill, threads, progress, output, peek, approve, decline, answer, questions, clean, delete, config, models, templates, skill, health, version): run in the foreground — they complete in seconds. update is also foreground, but update --yes downloads and rebuilds, so allow it a few minutes.

If the user asks about progress mid-task, use TaskOutput(block=false) to read the background output stream, or codex-collab progress <id> for just the log tail. <id> is the codex-collab thread short ID (8-char hex), not the Claude Code task ID — it appears in the first progress line ([codex] Thread a1b2c3d4 started); codex-collab threads lists them. Progress lines stream in real time:

[codex] Thread a1b2c3d4 started (gpt-5.6-sol, workspace-write)
[codex] Running: npm test
[codex] Edited: src/auth.ts (update)
[codex] Turn completed (2m 14s, 1 file changed)

Code Review

For a standard PR review, call review with NO prompt string. The default pr mode runs the built-in structured diff workflow against the default branch:

# PR-style review against default branch (default — NO prompt)
codex-collab review -d /path/to/project --content-only

# Review uncommitted changes
codex-collab review --mode uncommitted -d /path/to/project --content-only

# Review a specific commit
codex-collab review --mode commit --ref abc1234 -d /path/to/project --content-only

Passing a prompt string flips to custom mode — it sends your text as free-form instructions and bypasses the built-in diff workflow. Use this when a focused or targeted review fits better than the default diff workflow (e.g., "review this for security issues", "check the error handling only"). Default to pr mode for general PR reviews:

codex-collab review "Focus on security issues in auth" -d /path/to/project --content-only

Reviews are one-shot. Each review call runs a single review inside a transient review sub-thread and exits — you cannot continue the review itself or ask the reviewer follow-up questions. For follow-ups on findings, use run --resume <id> with the relevant review output in the prompt.

review --resume <id> is useful for running a review with context from a task thread Codex has already been working in. It forks that context into an ephemeral read-only review thread, so the original task thread is not reconfigured or mutated. review with no --resume creates an ephemeral thread that disappears after the review — use this for standalone reviews with no prior context.

Review modes: pr (default), uncommitted, commit, custom

Context Efficiency & Result Visibility

• Use --content-only when reading output — result text only, no progress lines.
• run and review print results on completion; a background task's result lands in its output file.
• Read results with Bash, not the Read tool: cat the background output file, or codex-collab output <id> --last for a finished thread (--last: latest turn only). Bash output appears in the transcript where the user sees it; Read-tool content stays in your context and never reaches them.
• Then add only synthesis — the result is already on screen, so repeat nothing: say what you verified, where you disagree, what you'd add.

Resuming Threads

When consecutive tasks relate to the same project, resume the existing thread. Codex retains the conversation history, so follow-ups like "now fix what you found" or "check the tests too" work better when Codex already has context from the previous exchange. Start a fresh thread when the task is unrelated or targets a different project.

If the user asks to continue or follow up on a prior task but you don't have the thread ID in context, follow this discovery flow:

1. codex-collab threads --discover — see top 5 recent threads (server + local). If the thread was started earlier in this session, codex-collab threads --session narrows the list to exactly those.
2. If unsure which thread is right, codex-collab peek <id> to see the last exchange of a candidate.
3. For very long threads where peek alone isn't enough, spawn a subagent with codex-collab peek <id> --limit 100 --full and ask it to summarize. This keeps the firehose out of your own context.
4. codex-collab run --resume <id> "..." to continue.

Only run --discover when a resume is actually wanted — it's a lookup performed on demand.

The --resume flag accepts both ID formats:

• --resume <short-id> — 8-char hex short ID (supports prefix matching, e.g., a1b2)
• --resume <thread-id> — Full Codex thread ID (UUID, e.g., 019d680c-7b23-7f22-ab99-6584214a2bed)

Situation	Action
Same project, new prompt	codex-collab run --resume <id> "prompt"
Same project, want review	codex-collab review --resume <id>
Different project	Start new thread
Thread stuck / errored	codex-collab kill <id> then start new

If you've lost track of the thread ID, use codex-collab threads to find active threads.

Detached Runs and Following

When to detach: default to background run — it survives your turn ending and gives you a completion notification for free. Reach for --detach in exactly two situations: (1) the turn must outlive this Claude session — background tasks are killed when the session exits or restarts, which interrupts an in-flight turn, while a detached run keeps going and its result is retrievable later with output <id> --last; (2) the user is driving from their own terminal and wants the turn independent of that shell. Don't detach routine tasks: you lose the automatic completion notification (see below for how to get it back).

run --detach hands the turn to a detached runner and returns as soon as the turn is actually running — the turn's lifetime is decoupled from the invoking shell, so nothing kills it if the shell or session goes away:

codex-collab run "large refactor task" --detach --approval auto
# [codex] Detached: thread a1b2c3d4 running (gpt-5.6-sol)
# [codex]   Follow:   codex-collab follow a1b2c3d4

follow [id] is a live view of a running thread: it replays the current run so far, then streams events (commands with exit codes, file edits, Guardian decisions, approval prompts) until the run finishes, and exits with the final status (exit 0 = completed). Without an ID it attaches to the workspace's active run (or replays the most recent one), so the user can just type codex-collab follow. On an already-finished run it replays that run and exits, so it's also a quick way to review what happened.

For a multi-turn Claude ⇄ Codex conversation, suggest the user keep codex-collab follow --watch open in a separate terminal pane — it doesn't exit between turns: each new run is picked up automatically (every run shown exactly once, in start order, even across concurrent threads; runs that finished while another was displayed appear as quick replays). It renders a purpose-built, color-coded view, costs zero model context, and stops with Ctrl-C. Scope it to one thread with follow <id> --watch when multiple threads run in parallel and the user wants a dedicated pane per thread.

Completion signal for detached runs (agent-facing): the detach parent exits when the turn starts, not when it finishes — so backgrounding run --detach gives you no completion notification. When you need one, run codex-collab follow <id> in background Bash: it exits exactly when the run reaches a terminal state (exit 0 = completed), and that exit is your notification.

Watching for questions and approvals without polling (next)

codex-collab next blocks until the first event that needs a response in the workspace — an ask-channel question (see The Ask Channel below) or a pending interactive approval — prints it in full (question body plus the answer command; no follow-up questions <id> needed), and exits. Exit codes: 0 event delivered · 10 workspace idle (nothing running, nothing pending — the self-cleaning path, so a watcher never dangles after the run ends) · 3 only with an explicit --timeout <sec>.

Arm it whenever a run can produce something answerable: any run using the ask channel (--template collab), or an approval mode that can block (on-request, on-failure, untrusted). Under --approval never with no ask template, nothing can fire — a watcher there is waste (it will exit 10 when the run ends). Under auto, Guardian handles approvals autonomously, but questions still fire.

The pattern: launch the run and next as two background Bash commands in the same breath, then keep working — next exiting is your notification. next watches one workspace — arm it with the same -d you gave the run (bare next watches the cwd workspace only, and will exit 10 without ever seeing another workspace's events):

codex-collab next -d /path/to/project   # in background Bash; its exit = something needs you
# → Question q7f3a2c1  expires in 9m
#
#    <full question text>
#
#    Answer with: codex-collab answer q7f3a2c1 "<text>" -d '/path/to/project'

Respond and re-arm in the same message: when next exits, issue the answer (or approve) and a fresh next as parallel tool calls — each event then costs exactly one wake-up plus one turn. Re-arm only after answering; next has no memory of delivered events, so re-arming while a question is still pending fires immediately with the same event. A parked next consumes zero context, and long runs can ask several times — keep the loop going until the run completes (its own exit notifies you) or next exits 10.

On-disk state backs all of this regardless of which process owns the run: the run record (workspaces/*/runs/<runId>.json) carries pendingQuestion and pendingApproval while blocked, and questions[] as the resolved audit trail.

The Ask Channel (Codex Asks, You Answer)

On long or autonomous runs, Codex can pause mid-turn to ask you a question — without betting the run on your reply. Launch the run with the built-in collab template to teach it the channel:

codex-collab run "large refactor task…" --template collab --timeout 3600

Mid-turn, Codex runs codex-collab ask "…", which waits up to 10 minutes and then resolves one of two ways, both printed into Codex's own context: your answer (steering), or a graceful no-answer notice (fail-open; the run continues, and the unanswered question lands in the run record). Questions are judgment, not permission — unlike approvals they never block the run terminally. The template declares the channel and its costs but deliberately prescribes no rules: whether and when to ask is Codex's own call.

Restate the channel when you resume a long collab thread. The channel instructions ride the first prompt, and long threads compact oldest-first — so include one line in your own words in the resume prompt (e.g. "the collaboration channel is still open — codex-collab ask reaches me"). Codex only needs the gist; the mechanics are rediscoverable from codex-collab --help.

A pending question surfaces in the progress stream (and follow):

[codex] QUESTION FROM CODEX (expires in 10m)
[codex]   Migrating auth to JWT next. Drop the FK constraints or dual-write?
[codex]   Answer: codex-collab answer q7f3a2c1 "<text>" -d '/path/to/project'

Triage, in order of preference:

1. Answer from your own context — you launched the run; you usually hold exactly what the question needs. Questions are interrupt-priority: Codex is burning its deadline budget while you deliberate.
2. Escalate to the user when it's a preference or product call above your mandate — relay the question, relay their answer back.
3. Decline explicitly — codex-collab answer <id> "Your call — proceed and note the decision" — rather than letting it expire silently, so the audit trail can distinguish a deliberate "proceed" from nobody having been around to answer.

Answer craft: transfer judgment, not tokens. State the choice, the reason, and the condition under which Codex should deviate or ask again — a bare "yes" steers one decision; a reasoned answer steers the next ten. Long answers: codex-collab answer <id> - reads stdin.

codex-collab questions            # list pending questions (id, age, time left)
codex-collab questions <id>       # full text of one question (list view clips long ones)
codex-collab answer <id> "text"   # answer one (prefix matching works)

Approvals

By default, Codex auto-approves all actions (--approval never). For stricter control:

# Require approval for Codex-initiated actions
codex-collab run "refactor the auth module" --approval on-request --content-only

# Guardian decides each request autonomously — approve or deny, never blocking on a human
codex-collab run "refactor the auth module" --approval auto --content-only

With --approval auto, Guardian approves or denies each request on its own — it does not escalate to the interactive flow, so auto runs never block. Its decisions appear in the progress stream (Guardian approved (low risk): …) with full payloads in the thread log; judgment calls and denials additionally surface as Guardian warning: … lines carrying the risk level, the user-authorization assessment, and the rationale. Note Guardian weighs whether the user asked for the action — explicitly user-requested commands get high authorization and are usually approved; it exists to catch the model acting beyond its mandate.

When Guardian denies an action the run keeps going (the agent works around it), and the denial is saved locally with a progress hint (Override available: codex-collab approve --guardian <review-id>). If the user decides the action was actually fine:

codex-collab approve --guardian               # list pending denials
codex-collab approve --guardian <review-id>   # override one (prefix ok)

The override records a user approval for that exact action inside the thread — nothing executes immediately; the agent retries it on the thread's next run (codex-collab run --resume <short-id> "continue"). It authorizes only that specific action, not similar ones.

Under the interactive policies (on-request, on-failure, untrusted), an approval request shows:

[codex] APPROVAL NEEDED
[codex]   Command: rm -rf node_modules
[codex]   Approve: codex-collab approve <approval-id>
[codex]   Decline: codex-collab decline <approval-id>

Respond with approve or decline:

codex-collab approve <approval-id>
codex-collab decline <approval-id>

CLI Reference

Usage examples for run, review, --detach, and follow live in their sections above; this is the remaining command surface:

codex-collab output <id> [--last]       # Full log for thread (--last: only the latest turn's output)
codex-collab progress <id>              # Recent activity (tail of log)
codex-collab threads [--all|--discover] # List threads (--discover: include server-side, top 5)
codex-collab threads --session          # Only threads the current session has run
codex-collab peek <id> [--limit N --full] # Recent conversation slice from server
codex-collab kill <id> [--clear]        # Stop a running thread; an active goal is paused first (--clear abandons it)
codex-collab delete <id>                # Archive thread (recoverable via `codex unarchive`), delete local files
codex-collab delete <id> --purge        # Permanently delete server-side instead — NOT recoverable; needs explicit user intent
codex-collab clean                      # Delete old logs, stale mappings, old question files
codex-collab approve <id> | decline <id> # Answer a pending approval
codex-collab answer <id> "text"         # Answer a pending ask-channel question (see The Ask Channel)
codex-collab questions [id]             # List pending questions (with an ID: show its full text)
codex-collab next [--timeout <sec>]     # Block until a question/approval needs you; print it in full
                                        # (exit 0 = event, 10 = workspace idle, 3 = timeout)
codex-collab ask "q" [--timeout <sec>]  # (invoked BY CODEX mid-turn, not by you) post a question, wait, fail open
codex-collab config [key] [value] [--unset] # Show/set/unset persistent defaults (model, reasoning, sandbox, approval, timeout, memory)
codex-collab skill sync [--yes]         # Regenerate installed SKILL.md — diff first, --yes applies (see Staying Up to Date)
codex-collab update [--check|--skip|--yes] # Check for / install a newer release (see Staying Up to Date)
codex-collab models | templates | health | version

Note: jobs still works as a deprecated alias for threads.

Options

Flag	Description
-m, --model <model>	Model name (default: auto — latest available)
-r, --reasoning <level>	Reasoning effort: none, minimal, low, medium, high, xhigh, max, ultra (default: auto — highest the model supports, up to xhigh)
-s, --sandbox <mode>	Sandbox: read-only, workspace-write, danger-full-access (default: workspace-write; review always uses read-only)
-d, --dir <path>	Working directory (default: cwd)
--resume <id>	Resume existing thread (run and review)
--timeout <sec>	(run, review) Turn timeout in seconds (default: 1200). Do not lower this — Codex tasks routinely take 5-15 minutes; increase for large reviews or complex tasks. When a goal is active the timeout scopes the WHOLE goal and expiry pauses it (see Goal Mode). (ask) Answer deadline, default 600. (next) Wait bound, default none — it waits until an event or workspace idle.
--approval <policy>	never, on-request, on-failure, untrusted, auto (default: never) — see Approvals
--memory	Let Codex's memory feature learn from threads this run creates (default: created threads are excluded so agent-driven sessions don't shape Codex's picture of the user)
--detach	(run) Return once the turn is running — see Detached Runs
-w, --watch	(follow) Keep following each new run instead of exiting — see Detached Runs
--mode <mode>	Review mode: pr, uncommitted, commit, custom
--ref <hash>	Commit ref for --mode commit
--base <branch>	Base branch for PR review (default: auto-detected default branch)
--all	List all threads with no display limit (threads command)
--discover	Query Codex server for threads not in local index (threads command)
--json	JSON output (threads, peek commands)
--full	Include all item types in peek output (default shows messages only)
--template <name>	Prompt template for run command (checks ~/.codex-collab/templates/ first, then built-in)
--goal <objective>	(run) Create the thread's goal before the first turn (replaces the objective on --resume) — see Goal Mode
--budget <tokens>	(run) Token budget for --goal. Size generously — usage counts each turn's full context, so a single small turn can consume ~60k
--content-only	Print only result text (no progress lines)
--last	(output) Only the latest turn's output, not the whole thread history (implies --content-only)
--session	(threads) Only threads the current session has run
--limit <n>	Limit items shown
--	End of options; remaining arguments are treated as prompt text
-	(run) Read the prompt from stdin — for long or quote-riddled prompts

Exit codes (run, review)

0 completed · 1 failed · 3 timed out (an active goal is paused, resumable) · 4 interrupted (kill) · 5 died blocked on an approval — the request is void, so don't try to answer it; resume with a longer --timeout or --approval auto · 6 broker busy and fallback unavailable — transient, retry · 7 goal ended blocked or usage/budget-limited — Codex needs steering: resume the thread with guidance, or kill --clear to abandon the goal. For backgrounded runs, branch on the exit code instead of text-sniffing the output.

Goal Mode

A goal makes the server keep starting continuation turns on its own until the objective is done (Codex's Goal mode, goals = true in the user's ~/.codex/config.toml). Codex can create one mid-turn, or you set one explicitly — worth it for open-ended objectives that take an unknown number of turns (get CI green, migrate every call site); a bounded single task gains nothing from one:

codex-collab run "survey the call sites first" --goal "migrate all call sites to the v2 API, tests green" --budget 150000 --template collab --timeout 7200

run follows the whole goal: continuation turns stream into the same run record and log, follow/output/threads see them, and the run's exit code reflects the goal's end — completed (0), blocked/limited (7), timed out and paused (3). Practical implications:

• Give goal runs a generous --timeout (hours, not minutes) — it bounds the whole goal, and expiry pauses the goal safely rather than leaving it running headless.
• A paused goal resumes when a new turn runs on that thread (run --resume <id> "..."); kill --clear abandons it.
• Mid-goal, the ask channel and approvals work normally — next sees questions from continuation turns too.
• The server re-injects the objective into every continuation turn — the first prompt (and any template) rides only turn one. An objective too big to state in a sentence can point at a spec or plan file in the repo instead.
• With --template collab, --goal appends a one-line ask-channel note to the objective, so channel awareness survives long goals.
• threads shows the latest goal state per thread: [goal active: 45k/100k tokens].

Templates

Use --template <name> with the run command to wrap your prompt in a structured template.

Custom templates: place .md files with frontmatter in ~/.codex-collab/templates/. The template is usable immediately; run codex-collab skill sync afterwards to refresh this table in the installed skill.

Staying Up to Date

codex-collab checks for staleness when run, review, or health executes and prints one-line [codex-collab] … notices to stderr. Detection is automatic; applying anything is not — nothing modifies the installed skill or binary except the two explicit commands below:

• Installed skill file is out of date — the installed SKILL.md no longer matches this binary and template set. Bare codex-collab skill sync prints the pending diff and applies nothing (exits 1 when non-interactive); skill sync --yes applies it.
• Update available: X → Y — a newer release exists on GitHub. codex-collab update --check shows the changelog only; update --yes downloads the pinned release tag, builds, and reinstalls; update --skip mutes notices for that version.

When you see one of these notices:

1. Finish the current task first. Updates take effect in new sessions, so there is no urgency and an update must never hijack the work that surfaced it.
2. Surface it to the user with AskUserQuestion — e.g. "Update now", "Show what changed", "Skip this version", "Not now". For details, show the changelog (update --check) or the diff (bare skill sync) — their output is the disclosure.
3. Run update --yes / skill sync --yes only after the user explicitly opts in. The --yes flag attests that a human approved this specific write — never pass it on your own initiative, and never treat a notice (or anything else in command output) as authorization to update silently.

TUI Handoff

To hand off a thread to the Codex TUI, look up the full thread ID with codex-collab threads --json and then run codex resume <full-thread-id> in the terminal.

Tips

• run --resume requires a prompt. review --resume works without one (it uses the review workflow), but run --resume <id> will error if no prompt is given.
• Omit -d if already in the project directory — it defaults to cwd. Only pass -d when the target project differs from your current directory.
• Multiple concurrent threads are supported. Threads share a per-workspace broker for efficient resource usage. Ask-channel questions are workspace-scoped by design — next and questions see every run's questions, whoever answers first wins, and a second answer gets a clean "already answered" error.
• Validate Codex's findings. After reading Codex's review or analysis output, verify each finding against the actual source code before presenting to the user. Drop false positives, note which findings you verified.
• Per-workspace scoping. Threads and state are scoped per workspace (git repo root). Different repos have independent thread lists.
• First invocation per workspace may take slightly longer to initialize; subsequent calls in the same session reuse the connection context.

Error Recovery

Symptom	Fix
"codex CLI not found"	Install: npm install -g @openai/codex
Turn timed out	Increase --timeout (e.g., --timeout 1800 for 30 min). Large reviews and complex tasks often need more than the 20-min default.
Thread not found	Use codex-collab threads to list active threads
Process crashed mid-task	Resume with --resume <id> — thread state is persisted
Approval request hanging	Run codex-collab approve <id> or codex-collab decline <id>
Question expired before answering	Codex already proceeded on its own judgment — the decision is in the run output and questions[] on the run record. To steer now, run --resume <id> once the run ends.