Maxxit 0G Trading
Execute portfolio-aware AI trade decisions through 0G decentralized compute, then trade perpetual futures on Ostium, Aster DEX, and Avantis DEX through Maxxit's Lazy Trading API. Alpha listings can be stored on 0G decentralized storage so buyers receive an independent rootHash verification proof.
Built-in Strategy Scripts
The skill includes standalone Python strategy scripts. Use them when the user wants the agent to run a predefined trading system instead of manually specifying each trade.
ema-strategy.py
- Trend-following EMA crossover on Binance klines using close prices.
rsi-bollinger-strategy.py
- Mean-reversion system that waits for price to pierce a Bollinger Band and re-enter with RSI confirmation.
donchian-adx-strategy.py
- Breakout system that trades Donchian channel breaks only when ADX confirms a strong trend regime.
taker-strategy.py - Aggressive Taker (Order Flow) HFT strategy. Analyzes Binance taker buy/sell ratios to detect aggressive market participants and catch rapid momentum shifts.mean-reversion-strategy.py - RSI + Bollinger Band mean-reversion strategy. A technical approach using price exhaustion points optimized for high-frequency scalping in sideways or boring markets.breakout-strategy.py - Volatility breakout strategy with ATR filter. Enters trades when price breaks out of a standard deviation channel while ATR confirms increasing volatility and momentum.vwap-strategy.py - VWAP crossover institutional momentum strategy. Uses volume-weighted average price and EMA to confirm institutional trend alignment and confirm trade strength with volume.
All scripts:
- read Binance kline data directly from
https://api.binance.com/api/v3/klines
- use
MAXXIT_API_URL and MAXXIT_API_KEY
- execute through Maxxit programmatic trading endpoints
- maintain per-symbol, per-venue state in the OpenClaw workspace
Example invocations:
python3 ema-strategy.py --symbol BTCUSDT --interval 5m --venue avantis
python3 rsi-bollinger-strategy.py --symbol ETHUSDT --interval 5m --venue ostium
python3 donchian-adx-strategy.py --symbol BTCUSDT --interval 15m --venue avantis
When to Use This Skill
- User wants to execute trades on Ostium
- User wants to execute trades on Aster DEX
- User asks about their lazy trading account details
- User wants to check their USDC/ETH balance
- User wants to view their open positions or portfolio
- User wants to see their closed position history or PnL
- User wants to discover available trading symbols
- User wants market research, a market summary, or a trade-focused research brief
- User asks for a trade decision, "should I trade X", "make a decision", "AI decision", or "what does 0G think"
- User wants a portfolio-aware AI trade recommendation
- User wants their alpha listing stored on 0G decentralized storage
- User wants a whole market snapshot for the trading purpose
- User wants to open a new trading position (long/short)
- User wants to close an existing position
- User wants to set or modify take profit levels
- User wants to set or modify stop loss levels
- User wants to fetch current token/market prices
- User mentions "lazy trade", "perps", "perpetuals", or "futures trading"
- User wants to automate their trading workflow
- User wants to copy-trade or mirror another trader's positions
- User wants to discover other OpenClaw agents to learn from
- User wants to see what trades top-performing traders are making
- User wants to find high-impact-factor traders to replicate
- User wants to sell their trading signals as alpha
- User wants to browse or buy trustless alpha from ZK-verified traders
- User wants to generate a ZK proof of their trading performance or flag a position as alpha
- User mentions "alpha marketplace", "sell alpha", "buy alpha", or "ZK proof"
Skill Maintenance
- If the user asks OpenClaw to update this skill, run:
npx clawhub@latest install maxxit-0g --force
โ ๏ธ DEX Routing Rules (Mandatory)
- Always ask venue first if unclear: "Do you want to trade on Ostium, Aster, or Avantis?"
- Always state the active venue explicitly in your response (e.g., "Using Ostium..." or "Using Aster..." or "Using Avantis...").
- Do not mix venue suggestions:
- If user is trading on Ostium, only suggest Ostium endpoints/actions.
- If user is trading on Aster, only suggest Aster endpoints/actions.
- If user is trading on Avantis, only suggest Avantis endpoints/actions.
- Do not ask network clarification:
- Ostium defaults to mainnet, but if the user explicitly asks for Ostium testnet / Arbitrum Sepolia, honor that and pass
isTestnet: true on Ostium endpoints.
- Aster is testnet-only in this setup.
- Avantis is mainnet-only (Base chain) in this setup.
- Therefore do not ask "mainnet or testnet?" unless the user explicitly requests Ostium testnet.
- If user switches venue mid-conversation, confirm the switch and then continue with only that venue's flow.
โ ๏ธ CRITICAL: API Parameter Rules (Read Before Calling ANY Endpoint)
NEVER assume, guess, or hallucinate values for API request parameters. Every required parameter must come from either a prior API response or explicit user input. If you don't have a required value, you MUST fetch it from the appropriate dependency endpoint first.
Parameter Dependency Graph
The following shows where each required parameter comes from. Always resolve dependencies before calling an endpoint.
| Parameter | Source | Endpoint to Fetch From |
|---|
userAddress / address | /user-details response โ user_wallet | GET /user-details |
agentAddress | /user-details response โ ostium_agent_address | GET /user-details |
tradeIndex | /open-position response โ actualTradeIndex OR /positions response โ tradeIndex | POST /open-position or POST /positions |
pairIndex | /positions response โ pairIndex OR /symbols response โ symbol id | POST /positions or GET /symbols |
entryPrice | /open-position response โ entryPrice OR /positions response โ entryPrice | POST /open-position or POST /positions |
market / symbol | User specifies token OR /symbols response โ symbol (e.g. ETH/USD) | User input or GET /symbols |
side | User specifies "long" or "short" | User input (required) |
collateral | User specifies the USDC amount | User input (required) |
leverage | User specifies the multiplier | User input (required) |
takeProfitPercent | User specifies (e.g., 0.30 = 30%) |
Mandatory Workflow Rules
- Always call
/user-details first to get user_wallet (used as userAddress/address). Cache it for the session โ it doesn't change.
- Treat
/user-details as identity-first. It always returns user_wallet for a valid API key, even if no lazy-trading agent exists yet.
/user-details is sparse. It omits fields that are empty, null, or false. Missing fields mean โnot applicableโ and should not be treated as an error or missing configuration by themselves.- Only use
ostium_agent_address when the venue needs an agent. Ostium and Avantis require it. Zerodha does not. Aster only needs user_wallet, but aster_configured must be present and true.
- Never hardcode or guess wallet addresses. They are unique per user and must come from
/user-details.
- For opening a position: Fetch current market context first (via
/api/lazy-trading/research, /api/lazy-trading/indian-stocks, /market-data, or /price as appropriate), present it to the user, get explicit confirmation plus trade parameters (collateral, leverage, side, TP, SL), then execute.
- Market format rule (Ostium):
/symbols returns pairs like ETH/USD, but /open-position expects market as base token only (e.g. ETH). Convert by taking the base token before /.
- For setting TP/SL after opening: Use the
actualTradeIndex from the /open-position response. If you don't have it (e.g., position was opened earlier), call /positions to get tradeIndex, pairIndex, and entryPrice.
- For closing a position: You need the
tradeIndex โ always call /positions first to look up the correct one for the user's specified market/position.
- Ask the user for trade parameters โ never assume collateral amount, leverage, TP%, or SL%. Present defaults but let the user confirm or override.
Pre-Flight Checklist (Run Mentally Before Every API Call)
โ
Do I have the user's wallet address? โ If not, call /user-details
โ
Does this flow require an agent address? โ If yes, call /user-details and verify ostium_agent_address is present
โ
Does this endpoint need a tradeIndex? โ If not in hand, call /positions
โ
Does this endpoint need entryPrice/pairIndex? โ If not in hand, call /positions
โ
Did I ask the user for all trade parameters? โ collateral, leverage, side, TP%, SL%
โ
Is the market/symbol valid? โ If unsure, call /symbols to verify
โ
(Alpha) Do I have commitment? โ If not, call /alpha/agents
โ
(Alpha) Do I have listingId? โ If not, call /alpha/listings
โ
(Alpha) For /verify: Am I passing content exactly as received? โ No modifications
โ
(Alpha) For /execute: Do I have agentAddress + userAddress? โ Call /user-details
Authentication
All requests require an API key with prefix lt_. Pass it via:
- Header:
X-API-KEY: lt_your_api_key
- Or:
Authorization: Bearer lt_your_api_key
Market Research Workflow
When the user asks for market research, use the Maxxit market research endpoint instead of writing the research from scratch.
Endpoint:
POST /api/lazy-trading/researchPOST /api/lazy-trading/indian-stocks for Indian equities research queries
Rules:
- Construct the
content prompt from the user's ask.
- Preserve the user's asset, timeframe, strategy, and risk focus.
- If the user is vague, build a best-effort trading research query from the context they gave instead of inventing a different objective.
- Prefer prompts that ask for market structure, trend, momentum, support/resistance, catalysts, and trading risks when relevant.
- Set
deepResearch to true when the user asks for deep research, a comprehensive comparison, a detailed diligence-style breakdown, or explicitly wants more thorough research.
- Set
deepResearch to false for standard market summaries, quick trade briefs, or normal tactical research requests.
- For
POST /api/lazy-trading/indian-stocks, OpenClaw must decide the request options from the user's query and should not ask the user to choose chat_model, response_length, or thinking_level.
- Always send
question plus the inferred request options:
chat_model: analytical or strategicresponse_length: short, medium, or longthinking_level: only include this when chat_model is strategic
- Use
chat_model: "strategic" when the user wants a trading plan, swing-trade setups, long/short ideas, entry zones, stop loss, target levels, timing for this week, or tactical positioning. In strategic mode, include thinking_level automatically:
- use
balanced by default
- use
low for quick, lightweight tactical asks
- use
deep only when the user explicitly asks for a more thoughtful or more detailed strategy answer
- Use
chat_model: "analytical" for screens, rankings, fundamentals, valuation, sector comparisons, capex-cycle beneficiaries, earnings quality, balance sheet analysis, and diligence-style research. Do not send thinking_level in analytical mode.
- Infer
response_length from the userโs ask:
- use
short for quick answers, concise trade ideas, and direct setup requests
Prompt construction examples:
- User: "Research BTC for a swing long."
- Query:
Analyze BTC for a swing-long setup. Cover market structure, momentum, key support/resistance, likely catalysts, invalidation levels, and major trading risks.
- User: "Give me market research on ETH for today."
- Query:
Summarize ETH market structure for today, including trend, momentum, key support/resistance, important catalysts, and trading risks for intraday positioning.
- User: "Research SOL before I short it."
- Query:
Analyze SOL for a potential short setup. Cover current market structure, weakness signals, resistance levels, downside levels to watch, catalysts, and key squeeze/invalidation risks.
Example call:
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/research" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H 'Content-Type: application/json' \
-d '{
"content": "Analyze BTC for a swing-long setup. Cover market structure, momentum, key support/resistance, likely catalysts, invalidation levels, and major trading risks.",
"deepResearch": false
}'
Indian stocks example:
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/indian-stocks" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H 'Content-Type: application/json' \
-d '{
"question": "Screen for Indian IT stocks with strong profit growth and low debt.",
"chat_model": "analytical",
"response_length": "medium"
}'
Indian stocks tactical example:
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/indian-stocks" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H 'Content-Type: application/json' \
-d '{
"question": "Which Indian banking stocks look strongest for a swing trade this week? Give long ideas only, with entry zone, stop loss, target range, and the reasoning behind each setup.",
"chat_model": "strategic",
"response_length": "short",
"thinking_level": "balanced"
}'
When discussing Indian equities, NSE/BSE orders, holdings, targets, stop losses, or portfolio values:
- use Indian rupees as the default unit
- prefer
โน in user-facing responses (for example, โน2,450, โน1.2 lakh)
API Endpoints
Ostium Programmatic Endpoints (/api/lazy-trading/programmatic/*)
All endpoints under /api/lazy-trading/programmatic/* are for Ostium unless explicitly prefixed with /aster/.
Get User Details
Retrieve lazy trading user information including wallet identity, agent status, Telegram connection, and trading preferences.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/user-details" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Response:
{
"success": true,
"user_wallet": "0x...",
"lazy_trading_ready": true,
"agent": {
"id": "agent-uuid",
"name": "Lazy Trader - Username",
"venue": "ostium",
"status": "active"
},
"telegram_user": {
"id": 123,
"telegram_user_id": "123456789",
"telegram_username": "trader"
},
"deployment": {
"id": "deployment-uuid",
If the user has not set up a lazy-trading agent yet, /user-details still returns 200 and identity data, for example:
{
"success": true,
"user_wallet": "0x..."
}
Get Available Symbols
Retrieve all available trading symbols from the Ostium exchange. Use this to discover which symbols you can trade.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/symbols" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Response:
{
"success": true,
"symbols": [
{
"id": 0,
"symbol": "BTC/USD",
"group": "crypto",
"maxLeverage": 150
},
{
"id": 1,
"symbol": "ETH/USD",
"group": "crypto",
"maxLeverage": 100
}
],
"groupedSymbols": {
"crypto": [
{ "id": 0, "symbol":
...
Get Account Balance
Retrieve USDC and ETH balance for the user's Ostium wallet address.
โ ๏ธ Dependency: The address field is the user's Ostium wallet address (user_wallet). You MUST fetch it from /user-details first โ do NOT hardcode or assume any address.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/balance" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d "{"address": "0x..."}"
Response:
{
"success": true,
"address": "0x...",
"usdcBalance": "1000.50",
"ethBalance": "0.045"
}
Get Portfolio Positions
Get all open positions for the user's Ostium trading account. This endpoint is critical โ it returns tradeIndex, pairIndex, and entryPrice which are required for closing positions and setting TP/SL.
โ ๏ธ Dependency: The address field must come from /user-details โ user_wallet. NEVER guess it.
๐ This endpoint provides values needed by: /close-position (needs tradeIndex), /set-take-profit (needs tradeIndex, pairIndex, entryPrice), /set-stop-loss (needs tradeIndex, pairIndex, entryPrice).
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/positions" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d "{"address": "0x..."}"
Request Body:
{
"address": "0x..."
}
Response:
{
"success": true,
"positions": [
{
"market": "BTC",
"marketFull": "BTC/USD",
"side": "long",
"collateral": 100.0,
"entryPrice": 95000.0,
"leverage": 10.0,
"tradeId": "12345",
"tradeIndex": 2,
"pairIndex": "0",
"notionalUsd": 1000.0,
"totalFees": 2.50,
"stopLossPrice": 85500.0,
Key fields to extract from each position:
tradeIndex โ needed for /close-position, /set-take-profit, /set-stop-losspairIndex โ needed for /set-take-profit, /set-stop-lossentryPrice โ needed for /set-take-profit, /set-stop-lossside โ needed for /set-take-profit, /set-stop-loss
### Get Position History
Get trading history for a wallet.
- `venue: "OSTIUM"` (default): uses Ostium history.
- `venue: "AVANTIS"`: returns normalized closed-trade history from Avantis `v2/history/portfolio/history`.
**Note:** The user's Ostium wallet address can be fetched from the `/api/lazy-trading/programmatic/user-details` endpoint (see Get Account Balance section above).
```bash
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/history" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{"venue":"OSTIUM","address":"0x...","count":50}'
Request Body:
{
"venue": "OSTIUM",
"address": "0x...",
"count": 50
}
Response:
{
"success": true,
"history": [
{
"market": "ETH",
"side": "long",
"collateral": 50.0,
"leverage": 5,
"price": 3200.0,
"pnlUsdc": 15.50,
"profitPercent": 31.0,
"totalProfitPercent": 31.0,
"rolloverFee": 0.05,
"fundingFee": 0.10,
"executedAt": "2025-02-10T15:30:00Z",
"tradeId": "trade_123"
}
Avantis history example (same /history endpoint):
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/history" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{"venue":"AVANTIS","userAddress":"0x...","count":50}'
Returns normalized records like:
id, tradeId (<pairIndex>:<tradeIndex>), market, side, collateralUsdc, positionSizeUsdc, leverage, entryPrice, closePrice, usdcSentToTrader, grossPnlUsdc, closedAt, timestamp.
Open Position
Open a new perpetual futures position on Ostium.
โ ๏ธ Dependencies โ ALL must be resolved BEFORE calling this endpoint:
agentAddress โ from /user-details โ ostium_agent_address (NEVER guess)userAddress โ from /user-details โ user_wallet (NEVER guess)market โ validate via /symbols endpoint if unsure the token exists
- If
/symbols returns ETH/USD, pass market: "ETH" to /open-position (not ETH/USD)
side, collateral, leverage โ ASK the user explicitly, do not assume
๐ Recommended Pre-Trade Flow:
- Call
/api/lazy-trading/research for crypto trade research, or /market-data / /price for current market conditions
- Present the market context to the user (price, structure, momentum, volatility when available)
- Ask the user: "Do you want to proceed? Specify: collateral (USDC), leverage, long/short"
- Only after user confirms โ call
/open-position
๐ Verification Note: Every trade is analyzed by EigenAI for alignment with market conditions. Users can verify the cryptographic signatures and reasoning for all their trades at maxxit.ai/openclaw.
๐ SAVE the response โ actualTradeIndex and entryPrice are needed for setting TP/SL later.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/open-position" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"side": "long",
"collateral": 100,
"leverage": 10
}'
Request Body:
{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"side": "long",
"collateral": 100,
"leverage": 10,
"deploymentId": "uuid...",
"signalId": "uuid...",
"isTestnet": false
}
Response (IMPORTANT โ save these values):
{
"success": true,
"orderId": "order_123",
"tradeId": "trade_abc",
"transactionHash": "0x...",
"txHash": "0x...",
"status": "OPEN",
"message": "Position opened successfully",
"actualTradeIndex": 2,
"entryPrice": 95000.0,
"reasoning": "Market sentiment is bullish...",
"llmSignature": "0x..."
}
Close Position
Close an existing perpetual futures position on Ostium.
โ ๏ธ Dependencies โ resolve BEFORE calling this endpoint:
agentAddress โ from /user-details โ ostium_agent_addressuserAddress โ from /user-details โ user_wallettradeIndex โ call /positions first to find the position you want to close, then use its tradeIndex
NEVER guess the tradeIndex or tradeId. Always fetch from /positions endpoint.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/close-position" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"tradeId": "12345"
}'
Request Body:
{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"tradeId": "12345",
"actualTradeIndex": 2,
"isTestnet": false
}
Response:
{
"success": true,
"result": {
"txHash": "0x...",
"market": "BTC",
"closePnl": 25.50
},
"closePnl": 25.50,
"message": "Position closed successfully",
"alreadyClosed": false
}
Set Take Profit
Set or update take-profit level for an existing position on Ostium.
โ ๏ธ Dependencies โ you need ALL of these before calling:
agentAddress โ from /user-details โ ostium_agent_addressuserAddress โ from /user-details โ user_wallettradeIndex โ from /open-position response โ actualTradeIndex, OR from /positions โ tradeIndexentryPrice โ from /open-position response โ entryPrice, OR from /positions โ entryPricepairIndex โ from /positions โ pairIndex, OR from /symbols โ symbol idtakeProfitPercent โ ASK the user (default: 0.30 = 30%)side โ from /positions โ side ("long" or "short")
If you just opened a position: Use actualTradeIndex and entryPrice from the /open-position response.
If the position was opened earlier: Call /positions to fetch tradeIndex, entryPrice, pairIndex, and side.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/set-take-profit" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"tradeIndex": 2,
"takeProfitPercent": 0.30,
"entryPrice": 90000,
"pairIndex": 0
}'
Request Body:
{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"tradeIndex": 2,
"takeProfitPercent": 0.30,
"entryPrice": 90000,
"pairIndex": 0,
"side": "long",
"isTestnet": false
}
Response:
{
"success": true,
"message": "Take profit set successfully",
"tpPrice": 117000.0
}
Set Stop Loss
Set or update stop-loss level for an existing position on Ostium.
โ ๏ธ Dependencies โ identical to Set Take Profit. You need ALL of these before calling:
agentAddress โ from /user-details โ ostium_agent_addressuserAddress โ from /user-details โ user_wallettradeIndex โ from /open-position response โ actualTradeIndex, OR from /positions โ tradeIndexentryPrice โ from /open-position response โ entryPrice, OR from /positions โ entryPricepairIndex โ from /positions โ pairIndex, OR from /symbols โ symbol idstopLossPercent โ ASK the user (default: 0.10 = 10%)side โ from /positions โ side ("long" or "short")
If you just opened a position: Use actualTradeIndex and entryPrice from the /open-position response.
If the position was opened earlier: Call /positions to fetch tradeIndex, entryPrice, pairIndex, and side.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/set-stop-loss" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"tradeIndex": 2,
"stopLossPercent": 0.10,
"entryPrice": 90000,
"pairIndex": 0,
"side": "long"
}'
Request Body:
{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"tradeIndex": 2,
"stopLossPercent": 0.10,
"entryPrice": 90000,
"pairIndex": 0,
"side": "long",
"isTestnet": false
}
Response:
{
"success": true,
"message": "Stop loss set successfully",
"slPrice": 81000.0,
"liquidationPrice": 85500.0,
"adjusted": false
}
Get All Market Data
Retrieve the complete market snapshot from Ostium, including all symbols and their current metrics. This is useful for market-wide scanning or analysis in a single request.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/market-data" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Response:
{
"success": true,
"data": [
{
"id": 0,
"symbol": "BTC/USD",
"group": "crypto",
"maxLeverage": 150,
"metrics": {
"price": "95000.12345678",
"percent_change_24h": 2.45,
"volatility": 0.032,
"volume_24h": "45000000000.00000000",
"market_cap": "1850000000000.00000000"
},
"updated_at": "2026-02-14T08:30:00.000Z"
},
...
],
Get Token Price
Fetch the current market price for a token from Ostium price feed.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/price?token=BTC&isTestnet=false" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Query Parameters:
| Parameter | Type | Required | Description |
|---|
token | string | Yes | Token symbol to fetch price for (e.g., BTC, ETH, SOL) |
isTestnet | boolean | No | Use Ostium testnet / Arbitrum Sepolia when explicitly requested by the user |
Response:
{
"success": true,
"token": "BTC",
"price": 95000.0,
"isMarketOpen": true,
"isDayTradingClosed": false
}
Discover Traders to Copy (Copy Trading โ Step 1)
Discover other OpenClaw Traders and top-performing traders to potentially copy-trade. This is the first step in the copy-trading workflow โ the returned wallet addresses are used as the address parameter in the /copy-trader-trades endpoint.
โ ๏ธ Dependency Chain: This endpoint provides the wallet addresses needed by /copy-trader-trades. You MUST call this endpoint FIRST to get trader addresses โ do NOT guess or hardcode addresses.
๐ซ Self-copy guard: Never use your own user_wallet from /user-details as a copy-trader address.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-traders" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-traders?source=openclaw" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-traders?source=leaderboard&minImpactFactor=50&minTrades=100" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Query Parameters:
| Parameter | Type | Default | Description |
|---|
source | string | all | openclaw (OpenClaw agents only), leaderboard (top traders only), all (both) |
limit | int | 20 | Max results per tier (max 100) |
minTrades | int | โ | Min trade count filter (leaderboard only) |
minImpactFactor | float | โ | Min impact factor filter (leaderboard only) |
Response:
{
"success": true,
"openclawTraders": [
{
"agentId": "3dbc322f-...",
"agentName": "OpenClaw Trader - 140226114735",
"creatorWallet": "0x4e7f1e29d9e1f81c3e9249e3444843c2006f3325",
"venue": "OSTIUM",
"status": "PRIVATE",
"isCopyTradeClub": false,
"performance": {
"apr30d": 0,
"apr90d": 0,
"aprSinceInception": 0,
"sharpe30d": 0
},
"deployment":
Key fields to use in next steps:
openclawTraders[].creatorWallet โ use as address in /copy-trader-tradestopTraders[].walletAddress โ use as address in /copy-trader-trades- Exclude any address equal to your own
/user-details.user_wallet
Get Trader's Recent Trades (Copy Trading โ Step 2)
Fetch recent on-chain trades for a specific trader address. This queries the Ostium subgraph in real-time for fresh trade data.
โ ๏ธ Dependency: The address parameter MUST come from the /copy-traders endpoint response:
- For OpenClaw traders: use
creatorWallet from openclawTraders[]
- For leaderboard traders: use
walletAddress from topTraders[]
NEVER guess or hardcode the address. Always call /copy-traders first.
TRADER_ADDRESS=$(curl -s -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-traders?source=openclaw" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" | jq -r '.openclawTraders[0].creatorWallet')
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-trader-trades?address=${TRADER_ADDRESS}" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/copy-trader-trades?address=${TRADER_ADDRESS}&hours=48&limit=50" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Query Parameters:
| Parameter | Type | Default | Description |
|---|
address | string | required | Trader wallet address (from /copy-traders) |
limit | int | 20 | Max trades to return (max 50) |
hours | int | 24 | Lookback window in hours (max 168 / 7 days) |
Response:
{
"success": true,
"traderAddress": "0x4e7f1e29d9e1f81c3e9249e3444843c2006f3325",
"trades": [
{
"tradeId": "0x123...",
"side": "LONG",
"tokenSymbol": "BTC",
"pair": "BTC/USD",
"collateral": 500.00,
"leverage": 10.0,
"entryPrice": 95000.50,
"takeProfitPrice": 100000.00,
"stopLossPrice": 90000.00,
"timestamp": "2026-02-17T14:30:00.000Z"
}
],
"count"
Trade Field Descriptions:
| Field | Description |
|---|
side | "LONG" or "SHORT" โ the trade direction |
tokenSymbol | Token being traded (e.g., BTC, ETH) |
pair | Full pair label (e.g., BTC/USD) |
collateral | USDC amount used as collateral |
leverage | Leverage multiplier (e.g., 10.0 = 10x) |
entryPrice | Price at which the trade was opened |
takeProfitPrice | Take profit price (null if not set) |
stopLossPrice | Stop loss price (null if not set) |
timestamp | When the trade was opened |
Next step: After reviewing the trades, use /open-position to open a similar position. You'll need your own agentAddress and userAddress from /user-details.
Signal Format Examples
The lazy trading system processes natural language trading signals. Here are examples:
Opening Positions
"Long ETH with 5x leverage, entry at 3200""Short BTC 10x, TP 60000, SL 68000""Buy 100 USDC worth of ETH perpetual"
With Risk Management
"Long SOL 3x leverage, entry 150, take profit 180, stop loss 140""Short AVAX 5x, risk 2% of portfolio"
Closing Positions
"Close ETH long position""Take profit on BTC short"
Complete Workflow Examples
These are the mandatory step-by-step workflows for common trading operations. Follow these exactly.
0G Decision Workflow
Use this workflow when the user says "should I trade [token]", "make a decision", "AI decision", "what does 0G think about [token]", or asks for a portfolio-aware recommendation.
Step 1: GET /user-details
โ Extract: user_wallet and deploymentId/deployment_id if present
โ If deploymentId is not returned directly, use the active lazy-trading deployment ID from the setup/status context
Step 2: POST /api/lazy-trading/research
โ Run market research for the token
โ Summarize the output into 2-3 sentences
โ Include all relevant market data in this summary because /alpha/0g-decision does not fetch market data separately
Step 3: POST /alpha/0g-decision
โ Body: {
"deploymentId": "{deploymentId from Step 1}",
"tokenSymbol": "{token}",
"marketResearchSummary": "{market + research summary from Step 2}"
}
โ Present to user:
0G Compute Decision โ {TOKEN}
Should Trade : YES / NO
Side : long / short / none
Confidence : X%
Reasoning : {reasoning}
Step 4: Ask โ "Do you want me to act on this decision?"
โ NO โ Done.
โ YES โ Continue to normal open-position workflow using the side from Step 3
โ Still ask user for required execution parameters that 0G did not provide, especially collateral, leverage, TP, and SL
Step 5 (after position opens): Ask โ "Would you like to list this trade as alpha on 0G storage?"
โ NO โ Done.
โ YES โ Run Alpha Producer workflow:
POST /alpha/generate-proof
Poll /alpha/proof-status until VERIFIED
POST /alpha/flag
If /alpha/flag returns ogStorage.rootHash, show it:
"Alpha listed!
Listing ID : {listingId}
0G Storage Root: {rootHash}
Buyers receive this root hash with their purchase receipt for independent verification on 0G."
If ogStorage.rootHash is null:
"Listed on Maxxit DB (0G storage unavailable)."
Workflow 1: Opening a New Position (Full Flow)
Step 1: GET /user-details
โ Extract: user_wallet (โ userAddress), ostium_agent_address (โ agentAddress)
โ Cache these for the session
Step 2: GET /symbols
โ Verify the user's requested token is available on Ostium
โ Extract exact symbol string and maxLeverage
โ Convert pair format to market token for /open-position:
"ETH/USD" -> "ETH"
Step 3: POST /api/lazy-trading/research (or GET /market-data or GET /price for current context)
โ Get trade context: market structure, momentum, support/resistance, catalysts, and current price
โ Present this data to the user:
"BTC is trading around $95,000 with bullish structure and clear support/resistance levels.
Do you want to proceed?"
Step 4: ASK the user for trade parameters
โ "Please confirm: collateral (USDC), leverage, long or short?"
โ "Would you like to set TP and SL? If so, what percentages?"
โ Wait for explicit user confirmation before proceeding
Step 5: POST /open-position
โ Use agentAddress and userAddress from Step 1
โ Use market, side, collateral, leverage from Step 4
โ IMPORTANT: Pass market as base token only (e.g. ETH), not pair format (ETH/USD)
โ SAVE the response: actualTradeIndex and entryPrice
Step 6 (if user wants TP/SL): POST /set-take-profit and/or POST /set-stop-loss
โ Use tradeIndex = actualTradeIndex from Step 5
โ Use entryPrice from Step 5
โ For pairIndex, use the symbol id from Step 2 or call /positions
โ Use takeProfitPercent/stopLossPercent from Step 4
Step 7: ASK โ "Would you like to list this trade as alpha on the marketplace?"
โ If user says NO โ Done.
โ If user says YES โ Continue to Step 8.
โ Also ask: "What price in USDC would you like to charge?" (e.g. 5 USDC)
Step 8: POST /alpha/generate-proof
โ Body: { "tradeId": "{tradeId from Step 5}", "autoProcess": false }
โ tradeId comes from the /open-position response
โ autoProcess: false queues the proof for the worker (~3-5 min)
โ SAVE: proofId from the response
Step 9: Wait for proof verification
โ If autoProcess was true and response has status: "VERIFIED" โ go to Step 10
โ If autoProcess was false or status is still PENDING/PROVING:
Poll GET /alpha/proof-status?proofId={proofId} every 10 seconds
โ Wait until status === "VERIFIED"
โ If status === "FAILED" โ inform the user and stop
Step 10: POST /alpha/flag
โ Body: {
"proofId": "{proofId from Step 8}",
"priceUsdc": {price from Step 7},
"token": "{market from Step 5, e.g. ETH}",
"side": "{side from Step 5, e.g. long}",
"leverage": {leverage from Step 5}
}
โ Show user the response: listingId, tradeId, proofMetrics
โ "Your trade is now listed as alpha! Listing ID: {listingId}"
Workflow 2: Closing an Existing Position
Step 1: GET /user-details
โ Extract: user_wallet, ostium_agent_address
Step 2: POST /positions (address = user_wallet from Step 1)
โ List all open positions
โ Present them to the user if multiple: "You have 3 open positions: BTC long, ETH short, SOL long. Which one do you want to close?"
โ Extract the tradeIndex for the position to close
Step 3: POST /close-position
โ Use agentAddress and userAddress from Step 1
โ Use market and actualTradeIndex from Step 2
โ Show the user the closePnl from the response
Workflow 3: Setting TP/SL on an Existing Position
Step 1: GET /user-details
โ Extract: user_wallet, ostium_agent_address
Step 2: POST /positions (address = user_wallet from Step 1)
โ Find the target position
โ Extract: tradeIndex, entryPrice, pairIndex, side
Step 3: ASK the user
โ "Position: BTC long at $95,000. Current TP: none, SL: $85,500."
โ "What TP% and SL% would you like to set?"
Step 4: POST /set-take-profit and/or POST /set-stop-loss
โ Use ALL values from Steps 1-3 โ NEVER guess any of them
Workflow 4: Checking Portfolio & Market Overview
Step 1: GET /user-details
โ Extract: user_wallet
Step 2: POST /balance (address = user_wallet)
โ Show the user their USDC and ETH balances
Step 3: POST /positions (address = user_wallet)
โ Show all open positions with PnL details
Step 4 (optional): GET /market-data
โ Show market conditions for tokens they hold
Workflow 5: Copy-Trading Another OpenClaw Agent (Full Flow)
Step 1: GET /copy-traders?source=openclaw
โ Discover other OpenClaw Trader agents
โ Extract: creatorWallet from the trader you want to copy
โ Exclude your own wallet (`/user-details.user_wallet`) if it appears
โ IMPORTANT: This is a REQUIRED first step โ you cannot call
/copy-trader-trades without an address from this endpoint
Step 2: GET /copy-trader-trades?address={creatorWallet}
โ Fetch recent trades for that trader from the Ostium subgraph
โ Review: side (LONG/SHORT), tokenSymbol, leverage, collateral, entry price
โ Decide: "Should I copy this trade?"
โ DEPENDENCY: The address param comes from Step 1 (creatorWallet or walletAddress)
Step 3: GET /user-details
โ Get YOUR OWN userAddress (user_wallet) and agentAddress (ostium_agent_address)
โ These are needed to execute your own trade
Step 4: POST /open-position
โ Mirror the trade from Step 2 using your own addresses from Step 3:
- market = tokenSymbol from the copied trade
- side = side from the copied trade (LONG/SHORT โ long/short)
- collateral = decide based on your own risk tolerance
- leverage = match the copied trader's leverage or adjust
โ SAVE: actualTradeIndex and entryPrice from response
Step 5 (optional): POST /set-take-profit and/or POST /set-stop-loss
โ Use actualTradeIndex and entryPrice from Step 4
โ Match the copied trader's TP/SL ratios or set your own
Dependency Chain Summary:
/copy-traders โ provides address โ /copy-trader-trades โ provides trade details
/user-details โ provides your addresses โ /open-position โ copies the trade
Automated Trading Strategies
Maxxit provides specialized scripts for different market conditions. These scripts require dynamic parameters passed via command line.
Execution Policy
- Dynamic Arguments: Scripts MUST be invoked with
--symbol and --venue.
- Agent Responsibility: If the user asks to start a strategy but does not provide the symbol (e.g., "BTC/USD") or the venue (e.g., "AVANTIS"), the agent MUST ask the user for the missing information before executing the script.
- Example Command:
python taker-strategy.py --symbol BTC/USD --venue AVANTIS
1. Aggressive Taker (HFT / Order Flow)
- Script:
taker-strategy.py
- Usage:
python taker-strategy.py --symbol <SYMBOL> --venue <VENUE>
- Logic Summary: Monitors the "Taker Buy Ratio" on Binance. When aggressive buyers (takers) dominate sellers beyond a threshold (0.60), it signals a high-conviction momentum move.
- Best For: Capturing rapid price changes in high-volume environments (Active Scalping).
2. Mean Reversion (Sideways / Range)
- Script:
mean-reversion-strategy.py
- Usage:
python mean-reversion-strategy.py --symbol <SYMBOL> --venue <VENUE>
- Logic Summary: Combines RSI (extreme oversold/overbought) with Bollinger Band touches. It identifies "exhaustion" points where the price is likely to bounce back to the average.
- Best For: Range-bound or sideways markets where there is no clear trend.
3. Volatility Breakout (Momentum)
- Script:
breakout-strategy.py
- Usage:
python breakout-strategy.py --symbol <SYMBOL> --venue <VENUE>
- Logic Summary: Enters a trade only when price breaks out of a standard deviation channel (Bollinger Bands) and volatility (ATR) is increasing. This filters out "fake" breakouts.
- Best For: Catching the start of a strong trend after a period of consolidation.
4. VWAP Crossover (Institutional Momentum)
- Script:
vwap-strategy.py
- Usage:
python vwap-strategy.py --symbol <SYMBOL> --venue <VENUE>
- Logic Summary: Uses Volume Weighted Average Price (VWAP) combined with a 20 EMA. A "Long" is triggered when price is above both the VWAP and the EMA, signaling that both volume and time-weighted momentum are positive.
- Best For: Intraday momentum trading and confirming trend strength with volume.
Aster DEX (BNB Chain) Endpoints
Aster DEX is a perpetual futures exchange on BNB Chain. Use Aster endpoints when the user wants to trade on BNB Chain. The Aster API uses API Key + Secret authentication (stored server-side) โ you do NOT need agentAddress. You only need userAddress from /user-details.
Venue Selection
| Venue | Chain | Symbol Format | Auth Required | When to Use |
|---|
| Ostium | Arbitrum (mainnet by default, testnet on explicit request) | BTC, ETH | agentAddress + userAddress | Default for most trades |
| Aster | BNB Chain (testnet only) | BTCUSDT, ETHUSDT | userAddress only | When user specifies BNB Chain or Aster |
| Avantis | Base (mainnet only) | Base token for orders (e.g. BTC), pair format in symbols/positions (e.g. BTC/USD) | agentAddress + userAddress | When user specifies Base chain or Avantis |
Network behavior rule: Do not ask users to choose mainnet/testnet for these venues by default. Ostium uses mainnet unless the user explicitly asks for testnet / Arbitrum Sepolia. Aster is fixed to testnet, and Avantis is fixed to Base mainnet.
How to check if Aster is configured: In the /user-details response, aster_configured: true means the user has set up Aster API keys. If false, direct them to set up Aster at maxxit.ai/openclaw.
Aster Symbols
Aster uses Binance-style symbol format: BTCUSDT, ETHUSDT, etc. The API auto-appends USDT if you pass just BTC.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/symbols" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Response:
{
"success": true,
"symbols": [
{
"symbol": "BTCUSDT",
"baseAsset": "BTC",
"quoteAsset": "USDT",
"pricePrecision": 2,
"quantityPrecision": 3,
"contractType": "PERPETUAL",
"status": "TRADING"
}
],
"count": 50
}
Aster Price
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/price?token=BTC" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Response:
{
"success": true,
"token": "BTC",
"symbol": "BTCUSDT",
"price": 95000.50
}
Aster Market Data
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/market-data?symbol=BTC" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Aster Balance
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/balance" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x..."
}'
Request Body:
{
"userAddress": "0x..."
}
Response:
{
"success": true,
"balance": 1000.50,
"availableBalance": 800.25,
"unrealizedProfit": 50.10
}
Aster Positions
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/positions" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x..."
}'
Response:
{
"success": true,
"positions": [
{
"symbol": "BTCUSDT",
"positionAmt": 0.01,
"entryPrice": 95000.0,
"markPrice": 96000.0,
"unrealizedProfit": 10.0,
"liquidationPrice": 80000.0,
"leverage": 10,
"side": "long"
}
],
"count": 1
}
Aster History (All Orders)
Fetch full order history for a symbol (includes active, canceled, and filled orders) from Aster.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/history" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x...",
"symbol": "BTC",
"limit": 100
}'
Request Body:
{
"userAddress": "0x...",
"symbol": "BTC",
"limit": 100,
"orderId": 12345,
"startTime": 1709251200000,
"endTime": 1709856000000
}
POST /api/lazy-trading/programmatic/aster/history now proxies to Aster /fapi/v3/allOrders.
Use this endpoint when users ask for "all old trades/orders", "order history", or "past orders" on Aster.
Aster Open Position
๐ LLM Pre-Call Checklist โ Ask the user these questions before calling this endpoint:
- Symbol: "Which token do you want to trade?" (e.g. BTC, ETH, SOL)
- Side: "Long or short?"
- Quantity: "How much [TOKEN] do you want to trade?" โ get the answer in base asset units (e.g.
0.01 BTC, 0.5 ETH).
- Leverage: "What leverage? (e.g. 10x)"
- Order type: "Market order or limit order?" (default: MARKET). If LIMIT, also ask for the limit price.
Aster requires quantity (base asset) for open-position. Do not use collateral.
NEVER call this endpoint without a confirmed quantity in base asset units.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/open-position" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x...",
"symbol": "BTC",
"side": "long",
"quantity": 0.01,
"leverage": 10
}'
Request Body:
{
"userAddress": "0x...",
"symbol": "BTC",
"side": "long",
"quantity": 0.01,
"leverage": 10,
"type": "MARKET",
"price": 95000
}
โ ๏ธ IMPORTANT: quantity must always be specified in the base asset (e.g. 0.01 for 0.01 BTC).
If the user provides a USDT/collateral amount, ask them to provide the exact token quantity instead.
Do not convert collateral to quantity in this workflow.
Response (IMPORTANT โ save these values):
{
"success": true,
"orderId": 12345678,
"symbol": "BTCUSDT",
"side": "BUY",
"status": "FILLED",
"avgPrice": "95000.50",
"executedQty": "0.010",
"message": "Position opened: long BTCUSDT"
}
Aster Close Position
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/close-position" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x...",
"symbol": "BTC"
}'
Request Body:
{
"userAddress": "0x...",
"symbol": "BTC",
"quantity": 0.005
}
Aster Set Take Profit
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/set-take-profit" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x...",
"symbol": "BTC",
"takeProfitPercent": 0.30,
"entryPrice": 95000,
"side": "long"
}'
Request Body (two options):
{
"userAddress": "0x...",
"symbol": "BTC",
"stopPrice": 123500
}
{
"userAddress": "0x...",
"symbol": "BTC",
"takeProfitPercent": 0.30,
"entryPrice": 95000,
"side": "long"
}
Aster Set Stop Loss
Same pattern as take profit:
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/set-stop-loss" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x...",
"symbol": "BTC",
"stopLossPercent": 0.10,
"entryPrice": 95000,
"side": "long"
}'
Aster Change Leverage
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/aster/change-leverage" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x...",
"symbol": "BTC",
"leverage": 20
}'
Aster Parameter Dependency Graph
| Parameter | Source | How to Get |
|---|
userAddress | /user-details โ user_wallet | GET /user-details |
aster_configured | /user-details โ aster_configured | GET /user-details (must be true) |
symbol | User specifies token | User input (auto-resolved: BTC โ BTCUSDT) |
side | User specifies "long" or "short" | User input (required) |
quantity | User specifies in base asset units (e.g. 0.01 BTC) | User input (required). If user provides USDT/collateral amount, ask for quantity instead. Do not calculate in the workflow. |
leverage | User specifies | User input |
entryPrice | /aster/positions โ entryPrice | From position data |
stopPrice | User specifies or calculated from percent | User input or calculated |
Aster Workflow: Open Position on BNB Chain
Step 1: GET /user-details
โ Extract: user_wallet
โ Check: aster_configured == true (if false, tell user to set up Aster at maxxit.ai/openclaw)
Step 2: GET /aster/symbols
โ Verify the token is available on Aster
Step 3: GET /aster/price?token=BTC
โ Get current price, present to user
Step 4: ASK the user for ALL trade parameters
โ "Which token?" (e.g. BTC, ETH, SOL)
โ "Long or short?"
โ "How much [TOKEN] do you want to buy/sell?" โ collect answer in BASE asset units (e.g. 0.01 BTC)
โข If user gives a USDT/collateral amount, ask them to provide token quantity instead.
โ "Leverage? (e.g. 10x)"
โ "Market or limit order?" โ if LIMIT, also ask for the limit price
Step 5: POST /aster/open-position
โ Use userAddress from Step 1
โ Use symbol, side, quantity (base asset), leverage from Step 4
โ SAVE orderId and avgPrice from response
Step 6 (if user wants TP/SL): POST /aster/set-take-profit and/or POST /aster/set-stop-loss
โ Use entryPrice = avgPrice from Step 5
โ Use side from Step 4
โ Ask user for takeProfitPercent / stopLossPercent (or exact stopPrice)
Aster Workflow: Close Position
Step 1: GET /user-details โ Extract user_wallet
Step 2: POST /aster/positions (userAddress = user_wallet)
โ Show positions to user, let them pick which to close
Step 3: POST /aster/close-position
โ Pass userAddress and symbol
โ Omit quantity to close full position
Avantis DEX (Base Chain) Endpoints
Avantis DEX is a perpetual futures exchange on Base chain. Use Avantis endpoints when the user wants to trade on Base. Avantis uses delegation-based auth (same pattern as Ostium) โ you need both agentAddress and userAddress from /user-details.
How to check if Avantis is configured: Use /user-details and check deployment.enabled_venues. If it includes "AVANTIS", Avantis is enabled for the current deployment. If not, direct the user to enable Avantis at maxxit.ai/openclaw.
Avantis Symbols
Avantis symbols are returned in pair format (e.g. BTC/USD, ETH/USD). The API endpoint maps the service's /markets route.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/avantis/symbols" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Response:
{
"success": true,
"markets": [
{
"pairIndex": 0,
"symbol": "BTC/USD",
"group": "crypto"
},
{
"pairIndex": 1,
"symbol": "ETH/USD",
"group": "crypto"
}
],
"count": 50
}
Avantis Get Token Price
Fetch the latest price for a specific token on Avantis.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/avantis/price?token=BTC" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Query Parameters:
| Parameter | Type | Required | Description |
|---|
token | string | Yes | Token symbol or pair (e.g. BTC or BTC/USD) |
Response:
{
"success": true,
"token": "BTC",
"market": "BTC/USD",
"pairIndex": 0,
"price": 95000.12
}
Avantis Balance
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/avantis/balance" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x..."
}'
Request Body:
{
"userAddress": "0x..."
}
Response:
{
"success": true,
"usdcBalance": "1500.25",
"ethBalance": "0.05"
}
Avantis Positions
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/avantis/positions" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"userAddress": "0x...",
"agentAddress": "0x..."
}'
Response:
{
"success": true,
"positions": [
{
"market": "BTC/USD",
"marketFull": "BTC/USD",
"side": "long",
"collateral": 100.0,
"entryPrice": 95000.0,
"leverage": 10.0,
"tradeId": "0:2",
"tradeIndex": 2,
"pairIndex": 0
}
],
"totalPositions": 1
}
Avantis Open Position
โ ๏ธ Dependencies:
agentAddress โ from /user-details โ ostium_agent_address (shared agent wallet; NEVER guess)userAddress โ from /user-details โ user_wallet (NEVER guess)market โ validate via /avantis/symbols. Use base token only (e.g. BTC, not BTC/USD)side, collateral, leverage โ ASK the user explicitly
Avantis uses collateral (USDC amount), similar to Ostium.
TP/SL can be set at open (takeProfitPercent / stopLossPercent) or updated later via /avantis/update-sl-tp.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/avantis/open-position" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"side": "long",
"collateral": 100,
"leverage": 10,
"takeProfitPercent": 0.30,
"stopLossPercent": 0.10
}'
Request Body:
{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"side": "long",
"collateral": 100,
"leverage": 10,
"takeProfitPercent": 0.30,
"stopLossPercent": 0.10
}
Response:
{
"success": true,
"txHash": "0x...",
"actualTradeIndex": 5,
"entryPrice": 95000.0,
"slSet": true,
"tpSet": true,
"message": "Trade submitted on Avantis",
"result": {
"market": "BTC",
"side": "long",
"collateral": 100,
"leverage": 10,
"slConfigured": true,
"tpConfigured": true
Avantis Close Position
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/avantis/close-position" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC"
}'
Request Body:
{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"tradeId": "0:2",
"actualTradeIndex": 2
}
Avantis Update SL/TP
TP/SL can be set at open time (via takeProfitPercent/stopLossPercent in open-position), or updated after opening using this endpoint.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/avantis/update-sl-tp" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"takeProfitPercent": 0.30,
"stopLossPercent": 0.10
}'
Request Body:
{
"agentAddress": "0x...",
"userAddress": "0x...",
"market": "BTC",
"tradeIndex": 0,
"takeProfitPrice": 100000,
"stopLossPrice": 80000,
"takeProfitPercent": 0.30,
"stopLossPercent": 0.10
}
Response:
{
"success": true,
"txHash": "0x...",
"message": "TP/SL updated successfully",
"result": {
"market": "BTC",
"tradeIndex": 0,
"entryPrice": 95000.0,
"takeProfitPrice": 123500.0,
"stopLossPrice": 85500.0,
"side": "long"
}
}
Avantis Trade History
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/history" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "Content-Type: application/json" \
-d '{
"venue": "AVANTIS",
"userAddress": "0x...",
"count": 50
}'
Request Body:
{
"venue": "AVANTIS",
"userAddress": "0x...",
"agentAddress": "0x...",
"count": 50
}
Response:
{
"success": true,
"venue": "AVANTIS",
"source": "avantis_api_v2_history",
"history": [
{
"id": "69a6e3b7...",
"tradeId": "1:0",
"market": "BTC/USD",
"pairIndex": 1,
"tradeIndex": 0,
"side": "long",
"collateralUsdc": 9.955,
"positionSizeUsdc": 1772.544045,
"leverage": 10.0,
"entryPrice": 67120.23805881,
Avantis Parameter Dependency Graph
| Parameter | Source | How to Get |
|---|
userAddress | /user-details โ user_wallet | GET /user-details |
agentAddress | /user-details โ ostium_agent_address | GET /user-details |
avantis_enabled | /user-details โ deployment.enabled_venues includes AVANTIS | GET /user-details |
market | User specifies token | User input (e.g. BTC, ETH) |
side | User specifies "long" or "short" | User input (required) |
collateral | User specifies USDC amount (must satisfy venue minimums) | User input (required) |
leverage | User specifies | User input |
tradeId | /avantis/positions โ tradeId (<pairIndex>:<tradeIndex>) | Preferred unique open-trade key |
tradeIndex | /avantis/positions โ tradeIndex | From position data |
Avantis Workflow: Open Position on Base Chain
Step 1: GET /user-details
โ Extract: user_wallet, ostium_agent_address (shared agent wallet)
โ Check: deployment.enabled_venues includes AVANTIS (if not, tell user to enable Avantis at maxxit.ai/openclaw)
Step 2: GET /avantis/symbols
โ Verify the token is available on Avantis
Step 3: ASK the user for ALL trade parameters
โ "Which token?" (e.g. BTC, ETH)
โ "Long or short?"
โ "How much USDC collateral?"
โ "Leverage? (e.g. 10x)"
โ "Would you like to set TP/SL? If so, what percentages?"
Step 4: POST /avantis/open-position
โ Use agentAddress and userAddress from Step 1
โ Use market, side, collateral, leverage from Step 3
โ SAVE: tradeIndex and entryPrice from response
Avantis Workflow: Close Position
Step 1: GET /user-details โ Extract user_wallet, ostium_agent_address (shared agent wallet)
Step 2: POST /avantis/positions (userAddress + agentAddress)
โ Show positions to user, let them pick which to close
โ Extract tradeIndex
Step 3: POST /avantis/close-position
โ Pass agentAddress, userAddress, market
โ Optionally pass actualTradeIndex
Zerodha (Indian Stocks) Endpoints
Zerodha is an Indian stock broker supporting equities on NSE and BSE. Use Zerodha endpoints when the user wants to trade Indian stocks, mentions NSE/BSE, or says "Indian stocks", "equities", or "Zerodha".
When to Use Zerodha
- User wants to trade Indian stocks on NSE or BSE
- User mentions "Indian stocks", "equities", "NSE", "BSE", "Zerodha", or "Kite"
- User asks about their Zerodha portfolio, holdings, or positions
- User wants to place, modify, or cancel orders on Indian exchanges
- User wants to fetch instrument lists or market data for Indian equities
Currency Convention
- In Indian-market conversations, present prices, holdings, portfolio values, targets, and stop losses in โน
- Prefer
โน in normal user-facing replies
- Do not default to USD when the context is Zerodha, NSE, BSE, or Indian equities
TP/SL and GTT Guidance
- When the user wants to set a take profit or stop loss for a Zerodha position, confirm whether they want to place a GTT order.
- Explain GTT briefly when needed: GTT (Good Till Triggered) is a Zerodha trigger order that stays active until the trigger condition is hit or the user cancels it, and it is commonly used to automate target and stop-loss execution for cash-market positions.
- If the user explicitly asks for GTT, use the Zerodha GTT flow directly.
- If the user asks for TP/SL but does not mention GTT, ask first instead of assuming they want a regular order or a GTT trigger.
Venue Routing
| Keywords | Route |
|---|
| "Indian stocks", "NSE", "BSE", "equities", "Zerodha", "Kite" | Zerodha endpoints |
Environment Variables
| Variable | Description | Source |
|---|
KITE_API_KEY | Zerodha Kite Connect API key | SSM (set in OpenClaw UI) |
KITE_API_SECRET | Zerodha Kite Connect API secret | SSM (set in OpenClaw UI) |
KITE_ACCESS_TOKEN | Short-lived access token (expires daily) | SSM (auto-stored after OAuth) |
KITE_USER_NAME | Zerodha display name for status/UI | SSM (auto-stored after OAuth) |
Auth Pre-Flight
Before any Zerodha trading call, check session validity:
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/zerodha/session" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "X-KITE-API-KEY: ${KITE_API_KEY}" \
-H "X-KITE-ACCESS-TOKEN: ${KITE_ACCESS_TOKEN}"
If authenticated: false or expired: true, tell the user:
"Your Zerodha session has expired. Please re-authenticate on the OpenClaw page at maxxit.ai/openclaw."
Important: All Zerodha requests must include:
X-API-KEY header (normal Maxxit auth)X-KITE-API-KEY headerX-KITE-ACCESS-TOKEN header- For wallet identity, call
/user-details first and use user_wallet. Zerodha does not require ostium_agent_address or lazy_trading_ready: true.
Zerodha Endpoints
All base path: ${MAXXIT_API_URL}/api/lazy-trading/programmatic/zerodha/
GET /zerodha/login
Generate a Zerodha login URL for the user.
Important:
- Do not tell the user to open a bare Kite URL like
https://kite.zerodha.com/connect/login?api_key=...&v=3.
- The login flow must preserve the Maxxit user context so the callback can store the Zerodha session against the correct wallet.
- When the user asks for the login link, give them the
login_url exactly as returned by the Maxxit API. That URL may use the Kite domain, but it must include the Maxxit user handoff in redirect_params.
- Preferred flow:
- Call
GET /user-details to resolve user_wallet.
- Call
GET /zerodha/login with X-API-KEY.
- Send the returned
login_url to the user.
- Do not manually construct a
?userWallet=<wallet>&redirect=1 URL in the normal skill flow.
- If you present the returned
login_url, only use it if it includes the user handoff, e.g. redirect_params=userWallet%3D....
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/zerodha/login" \
-H "X-API-KEY: ${MAXXIT_API_KEY}"
Response:
{
"success": true,
"login_url": "https://kite.zerodha.com/connect/login?api_key=5wh5hi6ky7y8s6g4&v=3&redirect_params=userWallet%3D0x796a837c78326ba693847deebd7811d6b6854c56",
"message": "Open the login_url in your browser to authenticate with Zerodha."
}
GET /zerodha/session
Check Zerodha session status. Returns authenticated: true if session is valid.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/zerodha/session" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "X-KITE-API-KEY: ${KITE_API_KEY}" \
-H "X-KITE-ACCESS-TOKEN: ${KITE_ACCESS_TOKEN}"
DELETE /zerodha/session
Invalidate Zerodha session and remove token from SSM.
GET /zerodha/portfolio
Fetch portfolio data. Use ?type=profile|holdings|positions|margins to select specific data. Default fetches all.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/zerodha/portfolio" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "X-KITE-API-KEY: ${KITE_API_KEY}" \
-H "X-KITE-ACCESS-TOKEN: ${KITE_ACCESS_TOKEN}"
With filter:
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/zerodha/portfolio?type=holdings" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "X-KITE-API-KEY: ${KITE_API_KEY}" \
-H "X-KITE-ACCESS-TOKEN: ${KITE_ACCESS_TOKEN}"
GET /zerodha/orders
List all orders. Use ?orderId=<id> for specific order history.
curl -L -X GET "${MAXXIT_API_URL}/api/lazy-trading/programmatic/zerodha/orders" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "X-KITE-API-KEY: ${KITE_API_KEY}" \
-H "X-KITE-ACCESS-TOKEN: ${KITE_ACCESS_TOKEN}"
POST /zerodha/orders
Place a new order.
curl -L -X POST "${MAXXIT_API_URL}/api/lazy-trading/programmatic/zerodha/orders" \
-H "X-API-KEY: ${MAXXIT_API_KEY}" \
-H "X-KITE-API-KEY: ${KITE_API_KEY}" \
-H "X-KITE-ACCESS-TOKEN: ${KITE_ACCESS_TOKEN}" \
-H 'Content-Type: application/json' \
-d '{
"variety": "regular",
"exchange": "NSE",
"tradingsymbol": "RELIANCE",
"transaction_type": "BUY",
"quantity": 1,
"product": "CNC",
"order_type": "MARKET"
}'
Required fields: exchange, tradingsymbol, transaction_type, quantity, product, order_type
Common values:
| Field | Values |
|---|
variety | regular, amo, co, iceberg, auction |
exchange | NSE, BSE, NFO, BFO, CDS, MCX |
transaction_type | BUY, SELL |
product | CNC, NRML, MIS, MTF |
order_type | MARKET, LIMIT, SL, SL-M |
validity | DAY, IOC, TTL |
How to explain Zerodha order fields to a normal trader:
| Field | Value | Meaning for a trader |
|---|
variety | regular | Standard exchange order placed during market hours. Use this by default unless the user asks for something more specific. |
variety | amo | After Market Order. Place the order outside market hours so it gets queued for the next session. |
variety | co | Cover Order. An intraday order paired with a compulsory stop loss. Use only if the user specifically wants a leveraged intraday order with a built-in risk stop. |
variety | iceberg | Iceberg Order. Splits one large order into smaller legs so the full size is not sent at once. Useful for quantities above freeze limits or to reduce visible impact. |
variety | auction | Auction Order. Used for exchange auction sessions, not for normal cash-market trading. Only use when the user explicitly wants auction participation. |
order_type | MARKET | Buy or sell immediately at the best available price. Prioritizes execution over exact price. |
order_type | LIMIT | Execute only at the specified price or better. Prioritizes price control over certainty of fill. |
order_type | SL | Stop-loss limit order. Once the trigger is hit, Zerodha places a limit order. Gives price control, but the order may remain unfilled in fast moves. |
order_type | SL-M | Stop-loss market order. Once the trigger is hit, Zerodha places a market order. Better for ensuring exit, but fill price can slip. |
product | CNC | Cash and Carry. Standard delivery equity order for shares you want to hold, typically in NSE/BSE cash markets. |
product | NRML | Normal order type commonly used for futures and options carry-forward positions, and other non-intraday derivatives exposure. |
