configuring-pfsense-firewall-rules

Configures pfSense firewall rules, NAT policies, IPsec/OpenVPN tunnels, and traffic shaping to enforce network segmentation and control traffic between zones such as DMZ, internal, guest, and IoT. Use when deploying a pfSense perimeter or internal firewall, setting up port-forwarding NAT, configuring site-to-site or remote-access VPNs, or applying QoS/bandwidth policies.

Jump to install

Repository: mukul975/Anthropic-Cybersecurity-Skills
Last source activity: August 2, 2026 at 16:32
Detected SKILL.md language: English
Stars: 27,732
Forks: 3,366

Install options

The review-first prompt is selected by default. You can switch to a direct command or download a local copy.

Review the source files

Read SKILL.md and any companion files shown by SkillsMP before deciding whether to install.

Back to search Back to installation

name	configuring-pfsense-firewall-rules
description	Configures pfSense firewall rules, NAT policies, IPsec/OpenVPN tunnels, and traffic shaping to enforce network segmentation and control traffic between zones such as DMZ, internal, guest, and IoT. Use when deploying a pfSense perimeter or internal firewall, setting up port-forwarding NAT, configuring site-to-site or remote-access VPNs, or applying QoS/bandwidth policies.
domain	cybersecurity
subdomain	network-security
tags	["network-security","pfsense","firewall","nat","network-segmentation"]
version	1.0
author	mahipal
license	Apache-2.0
nist_csf	["PR.IR-01","DE.CM-01","ID.AM-03","PR.DS-02"]
mitre_attack	["T1071.001","T1095","T1572","T1571","T1041"]

Configuring pfSense Firewall Rules

When to Use

Deploying a perimeter or internal firewall to segment and protect network zones (DMZ, internal, guest, IoT)
Creating granular access control rules to restrict traffic between VLANs and network segments
Configuring NAT rules for port forwarding to internal services exposed to the internet
Setting up site-to-site or remote access VPN tunnels using IPsec or OpenVPN
Implementing traffic shaping and bandwidth management for quality-of-service requirements

Do not use as a substitute for host-based firewalls on individual systems, for SSL/TLS deep packet inspection without dedicated hardware acceleration, or as the sole security control without complementary IDS/IPS.

Prerequisites

pfSense 2.7+ installed on dedicated hardware or virtual machine with at least two network interfaces
Access to the pfSense WebConfigurator (default: https://192.168.1.1)
Network topology diagram showing all interfaces, VLANs, and desired traffic flow
DNS and DHCP configuration planned for each network zone
Understanding of TCP/IP, NAT, and stateful firewall concepts

Workflow

Step 1: Configure Network Interfaces and VLANs

Access the pfSense WebConfigurator and define interfaces:

Navigate: Interfaces > Assignments

WAN Interface (igb0):
  - Type: DHCP or Static IP from ISP
  - Block private networks: Enabled
  - Block bogon networks: Enabled

LAN Interface (igb1):
  - IPv4: 10.10.1.1/24
  - Description: CORPORATE_LAN

Create VLANs:
  Navigate: Interfaces > VLANs > Add
  - VLAN 10 on igb1: DMZ (10.10.10.1/24)
  - VLAN 20 on igb1: SERVERS (10.10.20.1/24)
  - VLAN 30 on igb1: GUEST (10.10.30.1/24)
  - VLAN 40 on igb1: IOT (10.10.40.1/24)

Assign VLANs:
  Navigate: Interfaces > Assignments > Add each VLAN
  Enable each interface and assign the gateway IP

Step 2: Configure DHCP and DNS for Each Zone

Navigate: Services > DHCP Server

CORPORATE_LAN (10.10.1.0/24):
  Range: 10.10.1.100 - 10.10.1.200
  DNS: 10.10.20.10 (internal DNS server)
  Gateway: 10.10.1.1

DMZ (10.10.10.0/24):
  Range: 10.10.10.100 - 10.10.10.200
  DNS: 10.10.20.10
  Gateway: 10.10.10.1

GUEST (10.10.30.0/24):
  Range: 10.10.30.100 - 10.10.30.200
  DNS: 1.1.1.1, 8.8.8.8 (public DNS only)
  Gateway: 10.10.30.1

Navigate: Services > DNS Resolver
  Enable DNS Resolver on all interfaces except GUEST
  Enable DNSSEC
  Configure forwarding to upstream DNS servers

Step 3: Create Firewall Rule Aliases

Navigate: Firewall > Aliases

RFC1918_Networks:
  Type: Network
  Values: 10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16

WebPorts:
  Type: Port
  Values: 80, 443

ManagementPorts:
  Type: Port
  Values: 22, 3389, 5900

CriticalServers:
  Type: Host
  Values: 10.10.20.10, 10.10.20.11, 10.10.20.12

BlockedCountries:
  Type: URL Table
  URL: https://www.ipdeny.com/ipblocks/data/aggregated/cn-aggregated.zone
  Update: 24 hours

Navigate: Firewall > Rules

=== WAN Rules ===
# Block all inbound by default (implicit deny)
# Allow established/related traffic (automatic in pfSense stateful mode)

# Allow inbound to DMZ web server (via NAT)
Action: Pass | Interface: WAN | Protocol: TCP
Source: any | Destination: WAN Address | Port: 80, 443
Description: Allow HTTP/HTTPS to DMZ web server

=== LAN Rules ===
# Allow LAN to access internal servers
Action: Pass | Interface: LAN | Protocol: TCP
Source: LAN net | Destination: SERVERS net | Port: WebPorts, 3306, 5432
Description: Allow LAN to internal web and database servers

# Allow LAN to internet
Action: Pass | Interface: LAN | Protocol: any
Source: LAN net | Destination: ! RFC1918_Networks
Description: Allow LAN to internet (block inter-VLAN via RFC1918 exclusion)

# Block LAN to IoT (explicit deny before implicit allow)
Action: Block | Interface: LAN | Protocol: any
Source: LAN net | Destination: IOT net
Description: Block direct LAN to IoT communication

=== DMZ Rules ===
# Allow DMZ web servers to query internal DNS
Action: Pass | Interface: DMZ | Protocol: TCP/UDP
Source: DMZ net | Destination: 10.10.20.10 | Port: 53
Description: Allow DMZ DNS queries to internal resolver

# Allow DMZ to internet for updates only
Action: Pass | Interface: DMZ | Protocol: TCP
Source: DMZ net | Destination: any | Port: 80, 443
Description: Allow DMZ outbound HTTP/HTTPS for updates

# Block all other DMZ traffic
Action: Block | Interface: DMZ | Protocol: any
Source: DMZ net | Destination: any
Description: Default deny for DMZ

=== GUEST Rules ===
# Allow guest to internet only (DNS and web)
Action: Pass | Interface: GUEST | Protocol: TCP/UDP
Source: GUEST net | Destination: ! RFC1918_Networks | Port: 53, 80, 443
Description: Allow guest internet access only

# Block all guest to internal
Action: Block | Interface: GUEST | Protocol: any
Source: GUEST net | Destination: RFC1918_Networks
Description: Block guest access to all internal networks

=== IOT Rules ===
# Allow IoT to specific cloud endpoints
Action: Pass | Interface: IOT | Protocol: TCP
Source: IOT net | Destination: ! RFC1918_Networks | Port: 443, 8883
Description: Allow IoT HTTPS and MQTT to cloud

# Block IoT inter-device communication
Action: Block | Interface: IOT | Protocol: any
Source: IOT net | Destination: IOT net
Description: Prevent IoT lateral movement

# Block IoT to all internal networks
Action: Block | Interface: IOT | Protocol: any
Source: IOT net | Destination: RFC1918_Networks
Description: Block IoT access to internal

Navigate: Firewall > NAT > Port Forward

# Web server in DMZ
Interface: WAN | Protocol: TCP
Destination: WAN address | Port: 443
Redirect target IP: 10.10.10.50 | Port: 443
NAT Reflection: Enable
Description: HTTPS to DMZ web server

# SSH jump host (non-standard port)
Interface: WAN | Protocol: TCP
Destination: WAN address | Port: 2222
Redirect target IP: 10.10.20.11 | Port: 22
Description: SSH to internal jump host via port 2222

Navigate: Firewall > NAT > Outbound
Mode: Hybrid Outbound NAT
# Add rule for DMZ servers to use a dedicated public IP
Interface: WAN | Source: 10.10.10.0/24
Translation Address: <dedicated_public_ip>
Description: DMZ outbound NAT via dedicated IP

Navigate: Status > System Logs > Settings
  Remote Logging: Enable
  Remote log servers: 10.10.20.15:514 (Syslog/SIEM)
  Log firewall default blocks: Enabled

Navigate: Firewall > Rules
  Enable logging on critical rules:
  - All BLOCK rules
  - WAN inbound PASS rules
  - Inter-VLAN PASS rules

Navigate: Diagnostics > pfTop
  Monitor real-time connection states and bandwidth usage

Install pfBlockerNG package:
  Navigate: System > Package Manager > Available Packages
  Install pfBlockerNG-devel
  Configure IP blocklists (Spamhaus DROP, Emerging Threats)
  Configure DNSBL for malware domain blocking

# Export configuration backup
Navigate: Diagnostics > Backup & Restore
Download XML configuration file

# Test rules from each zone
# From LAN:
curl -I https://10.10.20.10  # Should succeed (LAN to SERVERS)
curl -I https://10.10.40.5   # Should fail (LAN to IOT blocked)

# From GUEST:
curl -I https://www.google.com  # Should succeed (internet)
curl -I https://10.10.20.10     # Should fail (guest to internal blocked)

# From DMZ:
nslookup google.com 10.10.20.10  # Should succeed (DNS allowed)
ssh 10.10.1.50                    # Should fail (DMZ to LAN blocked)

# Verify logging
Navigate: Status > System Logs > Firewall
Check that blocked and passed traffic is logging correctly

# Schedule automated config backups
Navigate: Diagnostics > AutoConfigBackup
Enable automatic backups to Netgate cloud or local storage

Term	Definition
Stateful Firewall	Firewall that tracks the state of network connections and automatically allows return traffic for established sessions without explicit rules
Alias	Named group of IP addresses, networks, or ports in pfSense that simplifies rule management and improves readability
NAT (Network Address Translation)	Translation of IP addresses between internal and external networks, including port forwarding for inbound access to internal services
Floating Rules	pfSense rules that apply across multiple interfaces simultaneously, processed before per-interface rules
pfBlockerNG	pfSense package that integrates IP reputation blocklists and DNS-based blocklists for automated threat blocking
Rule Processing Order	pfSense evaluates rules top-to-bottom within each interface tab; first match wins, and unmatched traffic is blocked by default

## pfSense Firewall Configuration Report

**Device**: pfSense 2.7.2 on Netgate 4100
**Interfaces**: WAN (igb0), LAN (igb1), DMZ (igb2), MGMT (igb3)
**VLANs**: 4 configured (Staff, Servers, Guest, IoT)
**Total Rules**: 28 active rules across all interfaces

### Rule Summary by Interface

| Interface | Pass Rules | Block Rules | Logging Enabled |
|-----------|-----------|-------------|-----------------|
| WAN | 2 | 1 (default) | Yes |
| LAN | 4 | 2 | Yes (blocks) |
| DMZ | 3 | 1 (default) | Yes |
| GUEST | 1 | 2 | Yes |
| IOT | 1 | 3 | Yes |

### Security Controls
- pfBlockerNG: 12 IP blocklists + DNSBL enabled
- Snort IDS: Running on WAN and LAN interfaces
- VPN: OpenVPN remote access configured with MFA
- Logging: All traffic forwarded to SIEM (10.10.20.15)