fm-debug

name	fm-debug
description	Debug a FileMaker script by capturing runtime state. At Tier 1 the agent instruments the script and gives the developer run instructions. At Tier 3 the agent can autonomously look up the script source, generate a debug-instrumented copy, deploy it via AppleScript, trigger it via the companion, and read the results — no human intervention required. Triggers on phrases like "debug this", "script not working", "wrong output", "script error", or when a script produces unexpected behavior that cannot be diagnosed from source alone.
compatibility	Tier 3 requires the companion server and macOS Accessibility permission for AppleScript deployment.

fm-debug

Debug a FileMaker script by capturing runtime variable state, error codes, and error locations. The agent's level of autonomy depends on the deployment tier configured in agent/config/automation.json.

---

Step 1: Determine the automation tier

Read agent/config/automation.json and check project_tier (preferred) or default_tier:

• Tier 1 — the developer runs scripts manually. The agent instruments the script and provides run instructions.
• Tier 3 — the agent can autonomously deploy and trigger scripts. The agent instruments, deploys, runs, and reads results without developer intervention.

Tier 2 follows the Tier 3 workflow for running scripts (via /trigger) but cannot create new scripts autonomously.

---

Step 2: Identify the diagnosis gap

Before generating any instrumentation:

1. State specifically what runtime information is needed — variable values, error codes, script result, which conditional branch was taken, etc.
2. Check for existing debug output at agent/debug/output.json. If it exists and is recent, read it and skip to Step 5.
3. Look up the script source — read the human-readable version from agent/xml_parsed/scripts_sanitized/ to understand the script's logic and identify where to insert debug instrumentation.

---

Step 3: Instrument the script

Critical: error data capture pattern

Get ( LastError ) resets the error state as a side effect. Once evaluated, Get ( LastErrorLocation ) and Get ( LastErrorDetail ) can no longer return data for that error. All three must be captured in a single expression within one Set Variable step:

Set Variable [ $errData ; JSONSetElement ( "{}" ;
    [ "lastError" ; Get ( LastError ) ; JSONNumber ] ;
    [ "lastErrorDetail" ; Get ( LastErrorDetail ) ; JSONString ] ;
    [ "lastErrorLocation" ; Get ( LastErrorLocation ) ; JSONString ]
) ]

When this pattern is used, Get ( LastErrorLocation ) returns "ScriptName\rStepName\rLineNumber" (carriage-return separated).

Never capture error data in separate steps — the first Set Variable clears the error for subsequent ones. See agent/docs/knowledge/error-data-capture.md for full details.

Additionally, Perform Script resets Get ( LastError ) to 0 when it successfully begins executing the subscript. The Agentic-fm Debug script's own error capture always sees lastError = 0. Callers must capture error data in the calling script and pass it as part of the JSON parameter.

Building the instrumented script

Look up the target script's ID from CONTEXT.json or the scripts index:

grep "ScriptName" "agent/context/{solution}/scripts.index"

Read the human-readable source from agent/xml_parsed/scripts_sanitized/ to understand the logic. Identify where to insert debug capture points — typically immediately after steps that might fail or at decision points.

Generate a modified copy of the script as fmxmlsnippet XML in agent/sandbox/ that includes debug instrumentation at the identified points. Each debug point should:

1. Capture error data in a single expression (the $errData pattern above)
2. Capture any relevant local variables
3. Call Perform Script [ "Agentic-fm Debug" ] with the captured state as a JSON parameter

Example debug instrumentation to insert after a risky step:

# Capture error data in ONE expression — Get(LastError) resets the error state
Set Variable [ $errData ; JSONSetElement ( "{}" ;
    [ "lastError" ; Get ( LastError ) ; JSONNumber ] ;
    [ "lastErrorDetail" ; Get ( LastErrorDetail ) ; JSONString ] ;
    [ "lastErrorLocation" ; Get ( LastErrorLocation ) ; JSONString ]
) ]
Perform Script [ "Agentic-fm Debug" ; Parameter: JSONSetElement ( "{}" ;
    [ "label" ; "after the risky step" ; JSONString ] ;
    [ "vars"  ; JSONSetElement ( "{}" ;
        [ "errData"  ; $errData  ; JSONRaw ] ;
        [ "myVar"    ; $myVar    ; JSONString ] ;
        [ "otherVar" ; $otherVar ; JSONString ]
    ) ; JSONRaw ]
) ]

Validate the instrumented script with validate_snippet.py before proceeding.

---

Step 4: Deploy and run

Tier 3 (autonomous)

The agent has the full deploy → run → read loop available:

1. Load clipboard — POST {companion_url}/clipboard with the XML
2. Deploy via raw AppleScript — POST {companion_url}/trigger with a raw_applescript payload that:
   • Activates FM Pro and switches to standard menus
   • Opens Script Workspace
   • Uses Cmd+N → Rename to create the debug script (if new), OR uses AXPress to open the existing script tab and Cmd+A → Delete → Cmd+V to replace (if modifying)
   • Saves with Cmd+S
3. Run the script — POST {companion_url}/trigger with fm_app_name, script, and optionally target_file
4. Read the output — read agent/debug/output.json (allow 2–3 seconds for the script to execute and the companion to write the file)

Prerequisites for Tier 3 autonomous debugging:

• fmextscriptaccess extended privilege must be enabled on the active account's privilege set in the frontmost FM document (required for /trigger do script calls)
• The companion server must be running on the host and reachable at companion_url
• Agentic-fm Debug script must be installed in the solution

Important: if deploying an instrumented copy of an existing script, use --replace mode (Cmd+A → Delete → Cmd+V) rather than creating a new script. After debugging, deploy the original script back to restore it.

Tier 1 (developer-assisted)

Give the developer clear instructions:

To debug this, I need runtime variable state. Please do the following:

1. The instrumented script is on your clipboard. Open "Script Name" in Script Workspace
2. Cmd+A — select all existing steps and delete
3. Cmd+V — paste the instrumented version
4. Run the script as you normally would
5. Let me know when it's done — I'll read agent/debug/output.json directly.

After debugging, provide the original script back on the clipboard for the developer to restore.

---

Step 5: Read and analyze the output

Read agent/debug/output.json:

cat agent/debug/output.json

The output contains:

• vars — the variables and error data captured by the instrumented script. This is the authoritative diagnostic data. The errData object within vars contains lastError, lastErrorDetail, and lastErrorLocation as captured by the calling script.
• Top-level lastError/lastErrorLocation — captured by the debug script itself. Always 0/empty because Perform Script resets the error state. Ignore these for diagnosis.
• timestamp — when the debug script ran
• label — description of the debug point

Parse the error data and identify the root cause. Explain the issue clearly and propose the fix.

---

Fallback: $$DEBUG Global Variable

If the solution does not have an Agentic-fm Debug script, the developer can add a temporary Set Variable step to collect debug state into a $$DEBUG global:

Set Variable [ $$DEBUG ; JSONSetElement ( "{}" ;
    [ "errData" ; JSONSetElement ( "{}" ;
        [ "lastError" ; Get ( LastError ) ; JSONNumber ] ;
        [ "lastErrorDetail" ; Get ( LastErrorDetail ) ; JSONString ] ;
        [ "lastErrorLocation" ; Get ( LastErrorLocation ) ; JSONString ]
    ) ; JSONRaw ] ;
    [ "varName1" ; $varName1 ; JSONString ] ;
    [ "varName2" ; $varName2 ; JSONString ]
) ]

The developer retrieves the value from the Data Viewer (Tools > Data Viewer) and pastes it into the conversation.

---

After diagnosis

1. Explain the root cause clearly
2. Propose and generate the fix
3. Restore the original script — if the script was modified for debugging, deploy the original version back (Tier 3: autonomous restore; Tier 1: clipboard with paste instructions)
4. If the Agentic-fm Debug script doesn't exist yet, offer to help create it (see agent/docs/AGENTIC_DEBUG.md)