incident-to-remediation-protocol

name	incident-to-remediation-protocol
description	Use this skill when a security incident must be triaged, contained, remediated, and reviewed in a Zero Trust assume-breach posture across Microsoft 365 and Dynamics 365 environments. Defines the end-to-end flow from detection through severity triage, containment approval, investigation, remediation, and post-incident review. Applies Zero Trust principles — verify explicitly, use least privilege, assume breach — throughout. Does not serve as an authorization to isolate devices, block users, or make configuration changes; all containment and remediation actions require human approval from the security owner or incident commander. Does not replace a qualified SecOps team or Microsoft Defender XDR specialist.
allowed-tools	Read Grep Glob
metadata	{"author":"github: Raishin","version":"0.1.0","updated":"2026-06-16","category":"security","lifecycle":"experimental"}

Incident-to-Remediation Protocol

Purpose

This skill defines how a security incident detected across Microsoft 365 or Dynamics 365 is triaged, classified by severity, contained, investigated, remediated, and reviewed in a Zero Trust posture. It applies the assume-breach principle throughout: the scope of compromise is always assumed to be larger than initial signals suggest until evidence proves otherwise. It does not authorize containment or remediation actions; those require the incident commander or security owner. It does not replace a qualified SecOps team or Microsoft Defender XDR escalation.

When to use

• A security incident has been detected in the Microsoft Defender portal (Microsoft Defender XDR) or reported through another channel.
• An identity compromise, device compromise, data exfiltration signal, or malicious configuration change is suspected in Microsoft 365 or Dynamics 365.
• A SecOps team needs a structured workflow for triage, containment approval, investigation, and post-incident review.
• A cross-workload incident spans Microsoft Defender for Identity, Microsoft Defender for Endpoint, Microsoft Defender for Office 365, and Dataverse environments simultaneously.

When NOT to use

• The incident has already been triaged and is in active SecOps investigation — hand off to the active investigation owner.
• The matter is a vulnerability disclosure rather than an active incident — use the security review path, not this protocol.
• The incident involves a data breach with regulatory notification obligations — escalate to the privacy owner and legal counsel immediately; this protocol does not cover breach notification timelines.
• The matter is outside Microsoft 365 or Dynamics 365 scope — route to the appropriate security team.

Participating agents

• m365-identity-zero-trust-agent — primary: assesses identity signals, Conditional Access coverage, Entra ID risk events, and Zero Trust posture gaps
• copilot-governance-maestro-agent — secondary: assesses Copilot and AI surface area exposure; coordinates cross-workload governance review
• microsoft-maestro-agent — orchestrates cross-workload incident scope; escalation path to Microsoft Defender XDR SecOps specialists (planned: defender-xdr-secops-agent)

Inputs required

• Incident ID or alert reference from Microsoft Defender portal
• Affected entities (users, devices, mailboxes, apps, Dataverse environments)
• Initial detection source (Microsoft Defender for Identity, Defender for Endpoint, Defender for Office 365, Defender for Cloud Apps, manual report)
• Reported or suspected incident type (phishing, credential compromise, ransomware, insider threat, misconfiguration exploitation, data exfiltration)
• Current containment status (not started, in progress, complete)

Evidence required

• Incident details from Microsoft Defender XDR portal (alerts, affected entities, attack story)
• Microsoft Entra ID sign-in logs and risk events for affected identities
• Audit logs from Microsoft Purview for affected workloads
• Threat analytics data (if available) from Microsoft Defender portal
• Prior incident or related-alert history

Workflow

1. Detect and ingest — receive incident signal; record incident ID, detection source, affected entities, and initial classification.
2. Severity triage — classify incident severity using Microsoft Defender XDR severity (Informational, Low, Medium, High, Critical) and assess blast radius (number of affected entities, data sensitivity, production impact).
3. Assume breach — apply Zero Trust assume-breach posture: treat the scope of compromise as larger than confirmed until evidence narrows it; do not wait for full confirmation before containment planning.
4. Containment planning — identify containment actions appropriate to severity and affected entities (disable compromised users, isolate affected devices, block hostile IPs or domains, revoke sessions); do not execute containment without approval.
5. Escalation gate: severity triage — if severity is High or Critical, escalate immediately to incident commander and microsoft-maestro-agent for Defender XDR SecOps coordination; do not proceed to containment without incident commander acknowledgment.
6. Escalation gate: containment approval — require explicit human approval from the incident commander or security owner before executing any containment action; record approval reference.
7. Execute approved containment — execute containment actions per the approval; record each action with timestamp, actor, and affected entity.
8. Investigation — analyze the attack story, affected entities, and alert timeline; identify root cause, initial access vector, lateral movement paths, and data accessed or exfiltrated.
9. Remediation planning — identify remediation actions (credential reset, device re-imaging, configuration correction, policy strengthening); confirm remediation actions are least-privilege and reversible where possible.
10. Remediation execution — execute approved remediation actions; verify each remediation step with evidence of completion.
11. Post-incident review — conduct a structured post-incident review: what was the attack type and impact, what detection and response gaps existed, what configuration or policy changes are needed, and what playbook updates are required.
12. Resolve incident — mark incident resolved in Microsoft Defender portal once all containment and remediation steps are confirmed; document resolution in audit log.

Decision gates

Gate	Condition	Action
Severity triage	Severity is High or Critical	Escalate immediately to incident commander + microsoft-maestro-agent; do not proceed without acknowledgment
Containment approval	Any containment action is planned	Require explicit human approval before execution; record approval reference
Breach scope uncertainty	Scope of compromise is not confirmed	Maintain assume-breach posture; treat scope as larger until evidence narrows it
Post-incident review	Incident is resolved	Mandatory post-incident review before closing; update playbooks and policies as needed

Refusal triggers

• A request is made to execute containment (user disable, device isolation, IP block) without recorded human approval — refuse.
• A request is made to close or resolve an incident without a completed post-incident review — refuse.
• Credentials, session tokens, OAuth tokens, or personal data are requested to perform investigation — refuse; work from sanitized incident signals and audit log references only.
• A data breach with regulatory notification obligations is suspected — stop and escalate to privacy owner and legal counsel; this protocol does not cover breach notification.

Handoff rules

• Every handoff carries: incident ID, severity, affected entities, containment status, investigation summary, remediation status, escalations fired, open questions, and a do-not-do list.
• No agent executes a containment or remediation action without recorded human approval.
• Post-incident review findings are handed off to the security owner for policy and playbook updates.

KPIs

• Mean time to detect (MTTD) and mean time to contain (MTTC) per severity tier
• Percentage of incidents with completed post-incident reviews
• Number of playbook or policy updates generated from post-incident reviews
• Percentage of containment actions executed within approved scope (no overreach)

References

• Plan an incident response workflow in the Microsoft Defender portal
• Investigate and respond using Microsoft Defender XDR
• Incident response with XDR and integrated SIEM (Zero Trust)
• Incident response playbooks