rspec

name	rspec
description	RSpec best practices from the RSpec Style Guide and Better Specs. Use when writing or reviewing RSpec specs, request specs, model specs, or integration tests in Ruby/Rails projects.

RSpec Style Guide & Best Practices

This skill applies the RSpec Style Guide and Better Specs. RuboCop RSpec enforces many of these rules.

Use when writing or reviewing RSpec examples, request specs, model specs, or integration tests.

---

Layout

• No empty line after describe/context/feature opening — start the block body immediately.
• One empty line between sibling describe/context blocks; none after the last block in a group.
• One empty line after subject, let, and before/after blocks.
• Group subject and let blocks together; separate them from before/after with a blank line.
• One empty line around each it/specify block to separate expectations from context.

# good
describe Article do
  subject { FactoryBot.create(:article) }
  let(:user) { FactoryBot.create(:user) }

  before do
    # ...
  end

  describe '#summary' do
    context 'when there is a summary' do
      it 'returns the summary' do
        # ...
      end
    end

    context 'when there is no summary' do
      it 'returns nil' do
        # ...
      end
    end
  end
end

---

Example Group Structure

• Order: Declare in this order: subject, then let!/let, then before/after. Put subject first when used.
• Contexts: Use context to group examples. Start with when, with, or without. Prefer having a matching negative case (e.g. "when X" and "when not X").
• let / let!: Use let for data shared across examples; use let! when the value must exist before the example runs (e.g. for scopes). Prefer let over instance variables (@var).
• Shared examples: Use shared_examples / it_behaves_like to DRY repeated behavior. Don’t over-DRY early; duplication in specs is acceptable for clarity.
• Hooks: Don’t specify :each (it’s the default). Use :context instead of :all when you need scope; avoid before(:context) when possible (state leakage).
• No it in iterators: Don’t generate examples in a loop; write each describe/it explicitly so changes are localized.

# bad
[:new, :show, :index].each do |action|
  it 'returns 200' do
    get action
    expect(response).to be_ok
  end
end

# good – separate describe per action
describe 'GET new' do
  it 'returns 200' do
    get :new
    expect(response).to be_ok
  end
end

---

Describe Your Methods

Use the Ruby documentation convention: . (or ::) for class methods, # for instance methods.

# bad
describe 'the authenticate method for User'
describe 'if the user is an admin'

# good
describe '.authenticate'
describe '#admin?'

---

Use Contexts

Group with context; full example names (all block descriptions concatenated) should read as a sentence.

# bad
it 'has 200 status code if logged in' do
  expect(response).to respond_with 200
end

# good
context 'when logged in' do
  it { is_expected.to respond_with 200 }
end
context 'when logged out' do
  it { is_expected.to respond_with 401 }
end

---

Subject

• Use subject when several examples relate to the same object under test.
• Prefer named subject when you reference it: subject(:article) { ... } and expect(article).to .... Use anonymous subject only when you use is_expected and never reference the subject by name.
• In nested contexts, if you reassign subject with different data, give it a different name (e.g. guest_article) so intent is clear.
• Don’t stub the subject: If you stub methods on the object under test, fix the design (e.g. inject dependencies or use a different subject) instead.

# good – named subject
describe Article do
  subject(:article) { FactoryBot.create(:article) }
  it 'is not published on creation' do
    expect(article).not_to be_published
  end
end

# good – anonymous when using is_expected
context 'when not valid' do
  it { is_expected.to respond_with 422 }
end

---

Example Structure

• Expectation per example: In isolated unit specs, prefer one expectation per example. For non-isolated specs (DB, HTTP, integration), multiple expectations in one example are acceptable; consider :aggregate_failures when you have several.
• Example descriptions: Don’t end with a conditional (e.g. "returns X if Y"); put the condition in a context and keep the example description about the outcome. Keep descriptions under ~60 characters; use context to split.
• No "should" in descriptions: Use third person, present tense. Don’t start with "should" or "should not".

# bad
it 'should return the summary'
it 'returns the summary if it is present'

# good
context 'when display name is present' do
  it 'returns the display name' do
    # ...
  end
end
it 'returns the summary'
it 'does not change timings'

---

Expect Syntax

Use expect only; never should. For one-liners with implicit subject, use is_expected.to.

# bad
response.should respond_with_content_type(:json)
it { should respond_with 422 }

# good
expect(response).to respond_with_content_type(:json)
it { is_expected.to respond_with 422 }

Configure RSpec to enforce expect syntax:

# spec_helper.rb or rails_helper.rb
RSpec.configure do |config|
  config.expect_with :rspec do |c|
    c.syntax = :expect
  end
end

---

let and let!

Prefer let over before { @var = ... }. Use let! when the value must exist before the example (e.g. testing scopes or queries). Don’t overuse let for trivial primitives; balance reuse vs. clarity.

# bad
before { @resource = FactoryBot.create(:device) }

# good
let(:resource) { FactoryBot.create(:device) }
let!(:user) { FactoryBot.create(:user) }  # when you need it loaded before the example

---

Matchers

• Predicate matchers: Prefer RSpec’s predicate matchers: expect(article).to be_published instead of expect(article.published?).to be true.
• Built-in matchers: Use built-in matchers (e.g. include, eq) instead of hand-rolled expectations.
• Avoid bare be: Don’t use expect(x).to be; use be_truthy, be_nil, or a specific matcher (e.g. be_an(Author)).
• Custom matchers: Extract repeated expectation logic into custom matchers (or use libraries like Shoulda Matchers).
• No any_instance_of: Avoid allow_any_instance_of / expect_any_instance_of; stub or inject the dependency instead.
• Block expectations: Prefer explicit block form: expect { do_something }.to change(something).to(new_value) over implicit subject with a lambda.

# bad
expect(article.published?).to be true
expect(article.author).to be

# good
expect(article).to be_published
expect(article.author).to be_truthy
expect(article.author).to be_an(Author)

---

Doubles and Stubbing

• Verifying doubles: Prefer instance_double, object_double, class_double, and verifying partial doubles over non-verifying doubles. Keep verify_partial_doubles enabled.
• Don’t stub subject: Don’t stub methods on the object under test; fix design or use a different subject (e.g. a presenter that receives the collaborator).
• Mock sparingly: Prefer real behavior when possible; use doubles to isolate external dependencies (DB, HTTP). If stubbing could hide a real bug, you’ve gone too far.
• Constants: Don’t define classes/modules/constants inside example groups (they leak). Use stub_const or anonymous Class.new and assign to a let.

---

Time and HTTP

• Time: Use Timecop (or ActiveSupport::Testing::TimeHelpers#freeze_time) instead of stubbing Time.now / Date.
• HTTP: Stub external HTTP (e.g. WebMock, VCR) so specs don’t hit real services.

---

Data and Factories

• Needed data only: Create only the data the example needs. Avoid dozens of records unless the test truly needs them.
• Factories over fixtures: Use Factory Bot (or similar), not fixtures. In unit tests, prefer minimal setup or objects built in the spec.
• Incidental state: Avoid depending on incidental state (e.g. "there are exactly 2 articles"); use change(Article, :count).by(1) or similar so the example is self-contained.

---

Rails: Integration, Controllers, Models, Views, Mailers

• Integration over controller specs: Prefer integration/request specs that test behavior; don’t add controller specs just for coverage if integration tests suffice.
• Controllers: Mock models and stub their methods; test only controller responsibility (assigns, redirects, template, status). Use contexts for success vs. failure (e.g. "when the article saves" / "when the article fails to save").
• Models: Don’t mock the model under test. Use FactoryBot.create or a new instance. Add an example that the factory-built model is valid. For validations, use expect(model.errors[:attr].size).to eq(1) (or a matcher) so the right attribute is validated. Name the other object in uniqueness specs another_article (or similar).
• Views: Mock models in view specs. Use assign for instance variables. Prefer Capybara negative selectors (have_no_selector) over not_to have_selector. Stub helpers on template when the view uses them.
• Mailers: Mock the model; verify subject, from, to, and body content.

---

Summary Checklist

• Layout: no empty line after describe/context; one between sibling groups; blank after let/subject/before; one around each it
• Order: subject, then let/let!, then before/after
• Describe with .method or #method; context with when/with/without
• Short example descriptions; no "should"; no conditional in the it string (use context)
• One expectation per example in unit specs; use expect / is_expected only
• Named subject when referenced; don’t stub subject
• Prefer verifying doubles; no any_instance_of
• Time: Timecop/freeze_time; HTTP: WebMock/VCR
• Minimal data; factories not fixtures; no it in iterators
• Shared examples where they reduce duplication without obscuring intent

---

References

• RSpec Style Guide — layout, structure, naming, matchers, Rails
• Better Specs — Rails testing practices (Lelylan Labs)
• RSpec · RuboCop RSpec