| name | build |
| description | "Execute a plan in dependency-ordered waves — run independent steps concurrently in isolated worktrees, one atomic, quality-gated commit per step. Use when: build N, execute the plan for N, run the build for roadmap unit N." |
Build
Execute the plan for roadmap unit $N wave by wave: group the plan's steps by their declared dependencies, run independent steps concurrently, and land one atomic, quality-gated commit per step. This is the fifth step of the spine: /mission → /brief N → /plan N → /build N → /verify N → /ship.
/build is side-effecting (it writes code, runs gates, and commits), so it is user-triggered only (disable-model-invocation: true). It is never auto-invoked.
The git log is the execution log. There is no third artifact file — BRIEF.md and PLAN.md are the only files per unit. Each completed step becomes one commit; the commit history is the record of what was built.
Confirm by default (OQ-5)
/build confirms with the user before dispatching each wave and before any other side-effecting change (committing, writing to the worktree). Follow the shared recommendation convention (godmode:recommend-convention) in rules/godmode-recommend.md: lead the confirm with a recommended default rather than a bare "wait for confirmation."
Before a wave runs, show the wave number, the steps in it, the files each step touches, and the agent each step dispatches to — then lead with the convention's confirm/proceed rendering, a Recommended: proceed — that names why this wave is safe to run (e.g. its steps are file-disjoint and each maps to a planned acceptance check), and invite the user to override:
Recommended: proceed — wave 2's 3 steps touch disjoint files and each maps to a
plan step. Reply "go", or name what to change.
Exception — Auto Mode. When ## Auto Mode Active is present in context, skip the confirmation prompts: dispatch each wave on the default choices and treat any user course-correction as normal input. The per-step quality-gate block (below) is never skipped, in either mode.
Step 1: Read the plan and reconcile state
Resolving the godmode helpers. The godmode-* helpers live in the plugin install dir — not the consumer repo you're working in — so a bare bin/godmode-* path fails from another project's working directory. Every bash block below resolves their location into $gm first (plugin mode → $CLAUDE_PLUGIN_ROOT/bin, manual install → ~/.claude/bin, in-repo → ./bin) and calls "$gm/godmode-<name>". Keep the resolver line; never call a helper by a bare relative path.
Find the brief directory for unit $N and read its PLAN.md. NN is $N zero-padded to two digits (unit 3 → 03), matching the directory /brief N and /plan N created. The glob is guarded so an empty match can't abort under set -euo pipefail:
NN=$(printf '%02d' "$N")
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-state" ] && { echo "$c/bin"; break; }; done)
mission_id=$("$gm/godmode-state" get mission_id)
brief_dir=$(ls -d .planning/missions/${mission_id}/briefs/${NN}-* 2>/dev/null | head -1 || true)
[ -n "$brief_dir" ] || { echo "No brief dir for unit $N — run /plan $N first." >&2; exit 1; }
If no ${brief_dir}/PLAN.md exists, stop and tell the user to run /plan $N first — do not invent a plan.
Read the plan's Steps, its Waves section, and its Verification plan. Read the linked BRIEF.md for the acceptance-criterion (AC) IDs each step references — the commit messages cite them.
Read the current workflow state — both the active unit and the status (which carries any partial progress from a prior /build run, see resumability below):
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-state" ] && { echo "$c/bin"; break; }; done)
active=$("$gm/godmode-state" get active_unit)
status=$("$gm/godmode-state" get status)
Reconcile active_unit with $N before doing anything else. If active is non-empty and differs from $N, the state points at a different unit. Set active_unit to $N so the recorded state stays coherent, and warn the user that the active unit changed:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-state" ] && { echo "$c/bin"; break; }; done)
if [ -n "$active" ] && [ "$active" != "$N" ]; then
echo "warning: active_unit was '$active', building '$N' — updating active_unit to $N." >&2
"$gm/godmode-state" set active_unit "$N"
status=""
fi
Do not silently proceed with mismatched state, and do not treat a different unit's done-set as this unit's progress.
Re-entry contract. Inspect status (the done-set schema is defined in Step 6):
- If
status begins with build complete for this unit (it reads build complete | unit: $N and active matched $N, see Step 7), there is nothing to build — report it and offer /verify $N.
- If
status contains a done-set for this unit, query it via godmode-state done has/done list (Step 6) and skip those step IDs (their commits already exist), running only the remaining steps plus any failed subtree from the prior run.
- Otherwise, this is a fresh build of unit
$N — the done-set starts empty.
Step 2: Derive the waves
A wave is a set of steps that can run concurrently because none depends on another in the same wave.
The authoritative source is each step's dependsOn field. Derive waves from it:
- Wave 1 = every step with
dependsOn: none.
- Wave k = every not-yet-placed step whose
dependsOn IDs are all in waves 1..k-1.
- Repeat until all steps are placed. A cycle (no step is placeable) is a plan error — stop and report it.
On the plan's ## Waves section. /plan N writes a pre-computed ## Waves grouping (e.g. Wave 1: S1, Wave 2: S2, S3) as a convenience. It is derived from dependsOn, so when both are present they must agree:
- If
## Waves agrees with the dependsOn-derived grouping, use it as written.
- If
## Waves contradicts dependsOn (a stale hand-edit drifted from the structured field), prefer dependsOn — it is the more precisely structured source — OR, if the contradiction looks intentional, flag the conflict and stop rather than guessing. Do not silently follow a stale ## Waves.
- If
## Waves is absent, derive the grouping from dependsOn. This is normal for older plans written before the section existed — it is not an error.
Run steps within a wave concurrently; run waves strictly in order — a wave starts only after the previous wave's steps have all committed and merged back (Step 5). Because the plan makes the steps in a wave file-disjoint, this ordering keeps the build-branch HEAD up to date by the time each step's agent merges it into its worktree (Step 3).
Step 3: Dispatch each step to an isolated worktree
Reap orphaned worktrees first. Before this wave dispatches any agent, prune leaked/orphaned worktrees so a stale .git/worktrees/<id> admin entry can't block a fresh git worktree add. Resolve $gm exactly as the Resolving the godmode helpers note in Step 1 shows; cleanup is idempotent and never touches a live worktree or the main tree:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-worktree" ] && { echo "$c/bin"; break; }; done)
"$gm/godmode-worktree" cleanup
For each step in the current wave, dispatch the implementation to a code-writing agent running in its own git worktree so concurrent steps never collide on files:
@executor — for a step that maps to a discrete, spec-shaped unit of work (the default for plan-driven steps).@writer — for a general implementation step that is not story-shaped.
Both agents declare isolation: worktree in their frontmatter. The SDK roots each agent's worktree on main, not on the build branch — so each agent's first action inside its worktree is to run the godmode-worktree create helper, which merges the up-to-date build-branch HEAD into that main-based tree (the enforced base). Because waves run strictly in order (Step 2) and each wave merges back before the next begins (Step 5), the build-branch HEAD each agent merges in is up to date — every worktree in a wave converges on the same base. Spawn one agent per step, in parallel within the wave. Give each agent:
-
the step's ID, the files it touches, the change it makes, and the brief AC IDs it satisfies;
-
the build-branch HEAD ref, captured by the orchestrator on the build branch before dispatch, with the instruction to, as its first action inside its worktree, run the godmode-worktree create helper with that ref as the explicit <build-ref> — this merges the current build-branch HEAD into the agent's SDK-provided (main-based) worktree so it builds on the enforced base, not a stale main. Capturing the ref is the orchestrator side of the create-first contract (@executor/@writer declare the create-first first action); the orchestrator resolves the ref here and hands it to each agent's brief. Resolve $gm exactly as the Resolving the godmode helpers note in Step 1 shows; never call a bare relative bin/godmode-worktree path:
build_ref=$(git rev-parse HEAD)
[ -n "$build_ref" ] || { echo "error: cannot resolve the build-branch HEAD to pass to agents." >&2; exit 1; }
-
the instruction to then, inside its own worktree: implement the step, run the per-step quality gates (Step 4), and on green make exactly one atomic commit for the step — never --no-verify (Step 5). The agent does not push and does not merge; it returns its worktree branch name and commit hash.
Do not implement steps inline in this orchestrating context — always dispatch to @executor/@writer. This skill orchestrates; the agents write the code, run the gates, and commit in their worktrees.
Model profile
Before spawning any agent, resolve the active model profile from ${CLAUDE_PLUGIN_OPTION_MODEL_PROFILE:-balanced}, then call the resolver "$gm/godmode-model" <agent> (resolve $gm as the Resolving the godmode helpers note in Step 1 shows) to obtain the model for that agent under the active profile. Pass that model to the Agent tool's model override at spawn time. The resolver also reports the agent's effort, but effort is frontmatter-only and is NOT set at spawn (platform limitation — effort cannot be overridden when spawning an agent), so override only model; effort stays whatever the agent's frontmatter declares.
Step 4: Per-step quality gates (run by the agent, in its worktree)
Before a step's changes are committed, they must pass every canonical quality gate. The dispatched @executor/@writer agent runs these gates inside its own worktree, before it commits — not this orchestrating skill. That is deliberate: the agents have broad Bash access (they write code and run typecheck/lint/test/build), so the gate commands execute where the changes live. This skill's narrow allowed-tools (no npm/cargo/shellcheck/etc.) is therefore intentional, not a blocker — the orchestrator never needs to run a project toolchain itself; it reads the plan, dispatches, and merges.
The gates are defined in config/quality-gates.txt — one gate per line. Read that file; do not hardcode the gate list here. It is the single source of truth. Pass the resolved gate list to each agent so every step is held to the same bar.
When .planning/STANDARDS.md is present, the code each step produces is also held to it as authoritative project context over the generic defaults where it has spoken (see "Project Standards Precedence" in rules/godmode-coding.md).
Resolve the file across install modes exactly as /ship does — plugin mode exposes ${CLAUDE_PLUGIN_ROOT}; manual mode installs it under ~/.claude/config/; fall back to a repo-relative path when developing the plugin itself:
GATES_FILE=""
for cand in \
"${CLAUDE_PLUGIN_ROOT:-}/config/quality-gates.txt" \
"$HOME/.claude/config/quality-gates.txt" \
"config/quality-gates.txt"; do
[ -n "$cand" ] && [ -f "$cand" ] && { GATES_FILE="$cand"; break; }
done
[ -n "$GATES_FILE" ] || { echo "error: quality-gates.txt not found" >&2; exit 1; }
while IFS= read -r gate; do
[ -n "$gate" ] || continue
printf 'gate: %s\n' "$gate"
done < "$GATES_FILE"
For each gate, the agent auto-detects the project's command (typecheck, lint, test, build, secret scan) and runs it against the step's changes inside its worktree. Lint includes shellcheck clean for any .sh change. Each agent reports its step's gate results back to the orchestrator:
Step S2 — quality gates (from config/quality-gates.txt):
[✓/✗] Typecheck passes (zero errors)
[✓/✗] Lint passes (zero errors; shellcheck clean for any .sh change)
[✓/✗] All tests pass (existing + new)
[✓/✗] No hardcoded secrets in the diff
[✓/✗] No regressions in related functionality
[✓/✗] Changes match the original requirements
A step commits only when every gate passes (the agent makes that commit in its worktree, below). If a gate fails, the step has failed — see failure isolation below.
Step 5: Atomic commit in the worktree, then sequential merge-back
This is where one atomic, gated commit per step lands on the build branch. The work splits cleanly between the agent and the orchestrator — the orchestrator never re-commits work it did not write; it merges.
5a — The agent commits, in its own worktree. When a step's gates pass, the dispatched agent makes exactly one atomic commit of its changes on its worktree branch. The commit message references the unit, the step ID, and the brief AC IDs the step satisfies:
feat: unit $N S2 — <step summary> (AC-2, AC-3)
The agent does this with git commit inside its worktree. Never --no-verify. Never bypass a quality gate. The commit lands only after Step 4 is green. The agent then returns its worktree branch name and commit hash to the orchestrator. The orchestrator does not stage or commit these files — they are already committed.
5b — The orchestrator merges each step's branch back, sequentially. After every step in the wave has returned (committed in its worktree, or failed), the orchestrator merges the wave's step branches one at a time onto the build branch, in step order:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-worktree" ] && { echo "$c/bin"; break; }; done)
for step_branch in "${WAVE_STEP_BRANCHES[@]}"; do
if ! "$gm/godmode-worktree" mergeback "$step_branch"; then
echo "merge conflict on $step_branch — halting that step's subtree; reporting." >&2
"$gm/godmode-worktree" cleanup "$step_id"
continue
fi
done
Because the plan makes the steps in a wave file-disjoint, these sequential merges are clean in the normal case — mergeback fast-forwards when the build branch hasn't advanced and does a trivial no-edit merge otherwise. On conflict the helper aborts that single merge and exits non-zero; the orchestrator then reaps that one failed step's worktree with godmode-worktree cleanup <id> (a targeted reap of just that worktree, not the Step 3 full sweep), halts that step's dependency subtree (Step 6), and reports it — other steps and waves are unaffected.
Reap on agent-abort too. When a dispatched agent reports it cannot complete its step (gates won't pass, or it aborts) — not a merge conflict but a failure before any merge-back — apply the same targeted reap so the agent's abandoned worktree is cleaned up promptly rather than waiting for the next wave's Step 3 sweep:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-worktree" ] && { echo "$c/bin"; break; }; done)
"$gm/godmode-worktree" cleanup "$step_id"
5c — Record and advance. The orchestrator records each merged step's commit hash, marks the step done (resumability, Step 6), and only then advances to the next wave. The next wave's worktrees are still SDK-rooted on main, but each agent's first-action godmode-worktree create (Step 3) merges the now-updated build-branch HEAD in — so no wave ever builds on a stale base.
Step 6: Failure isolation and resumability
A failed step (gates won't pass, or its agent reports it cannot complete) halts only its dependency subtree — the steps that transitively declare dependsOn on the failed step — not unrelated waves or steps:
-
Compute the subtree to skip with godmode-skipset instead of hand-walking dependsOn. Feed the plan's dependsOn adjacency — the same STEP: dep1, dep2 mapping the orchestrator already parses to derive waves (Step 2) — on stdin to godmode-skipset <failed-step>. It emits the transitive descendant closure (every step that depends on the failed step directly or transitively, one ID per line, sorted and de-duplicated, excluding the failed step itself). Treat those emitted IDs as the exact set to skip. Resolve $gm exactly as the Resolving the godmode helpers note in Step 1 shows:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-skipset" ] && { echo "$c/bin"; break; }; done)
skip_ids=$(printf '%s\n' "$ADJACENCY" | "$gm/godmode-skipset" "$failed")
-
Continue running every other independent step and wave. Steps with no dependency on the failure proceed and commit normally.
-
Report which step failed, why, and which descendant steps were skipped as a result (the godmode-skipset output).
Record partial progress so /build is resumable — a re-run picks up where it left off rather than redoing committed steps. The state file has exactly three keys (active_unit, status, next_command); the done-set is encoded into status using a fixed, parseable convention so no fourth key is needed:
status = "building <N> | done: <S-id>,<S-id>,..."
building <N> is the human-readable label; everything after | done: is the machine done-set — a comma-separated list of completed step IDs. The completion state uses build complete (Step 7). This schema is owned by the godmode-state helper — the orchestrator never parses or rebuilds the encoded list by hand; it calls the helper's done subcommands, which encode membership inside status while preserving the three-key invariant.
Append a just-merged step to the done-set with godmode-state done add <step>. The helper reads the current status, appends the step (idempotently — re-adding a member is a no-op), and writes it back, preserving the label prefix. Resolve $gm exactly as the Resolving the godmode helpers note in Step 1 shows; never hardcode or hand-parse the list:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-state" ] && { echo "$c/bin"; break; }; done)
"$gm/godmode-state" done add "$step"
To test membership when deciding whether to skip a step on re-entry, use godmode-state done has <step> — it exits 0 when the step is already in the done-set (skip it) and 1 otherwise (run it). The helper does the comma-wrapped match so S2 never matches S20:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-state" ] && { echo "$c/bin"; break; }; done)
if "$gm/godmode-state" done has "$step"; then
echo "skip $step — already done"
else
echo "run $step"
fi
To read the whole done-set (e.g. to report resumable progress), use godmode-state done list, which prints the comma-separated set.
On a fresh /build $N (Step 1 re-entry contract), query the done-set via godmode-state done has/done list, skip every step already listed (their commits already exist and are merged), and resume with the first wave that still has incomplete steps. A re-run after a failure retries the failed subtree without touching the steps that already committed.
Step 7: Record workflow state on completion
When every step has committed and merged back (or only a contained failed subtree remains, reported to the user), point the workflow forward via bin/godmode-state. The completion status records the unit so the Step 1 re-entry check can recognize an already-built unit:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-state" ] && { echo "$c/bin"; break; }; done)
"$gm/godmode-state" set active_unit "$N"
"$gm/godmode-state" set status "build complete | unit: $N"
"$gm/godmode-state" set next_command "/verify $N"
This lets /godmode tell the user the build is done and what to do next. On a later /build $N, Step 1 sees build complete | unit: $N (with active_unit matching $N) and reports there is nothing to build, offering /verify $N.
Step 8: Fix mode (--fix)
/build $N --fix runs the fix flow instead of the plan flow: it reads the open findings /verify $N recorded for the unit and dispatches one fix agent per affected file to resolve them. The plan flow (Steps 2–7) and the fix flow are two distinct modes of the same skill — the flag selects which one runs.
8a — Invocation and exclusivity
--fix and the plan flow are mutually exclusive in a single invocation:
/build $N (no flag) is the plan flow, exactly as Steps 2–7 describe — unchanged./build $N --fix is the fix flow. When --fix is present, run the fix flow described in this step and SKIP the plan execution of Steps 2–7 entirely — do not derive waves from dependsOn, do not read PLAN.md for steps. The fix flow reads ${brief_dir}/FINDINGS.md (resolved via the helper, below), not PLAN.md.
Resolve $brief_dir exactly as Step 1 does (it is independent of which flow runs): zero-pad $N to NN, read mission_id from state, glob .planning/missions/${mission_id}/briefs/${NN}-*. If no brief_dir resolves, stop and tell the user to run /plan $N first. Resolve $gm exactly as the Resolving the godmode helpers note in Step 1 shows.
8b — The target set
The target is the open, blocking subset of findings — the same subset that gates /ship. Never re-derive that predicate skill-side; always read it through the helper:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-findings" ] && { echo "$c/bin"; break; }; done)
targets=$("$gm/godmode-findings" list "$brief_dir" --open --blocking --decode)
--all widens the target to every open finding, blocking or not, by dropping --blocking:
targets=$("$gm/godmode-findings" list "$brief_dir" --open --decode)
--decode is always passed so each record's free-text columns (lens, location, note) are human-readable for the fix agent. The helper owns the open/blocking predicate — the fix flow only consumes its output.
8c — Group by file into buckets (one concurrent wave)
Group the target findings into buckets, one per file. The file key for a finding is its location basename with any trailing :NNN line suffix stripped — identical to the file component of the store's match key, so two findings on the same file (e.g. auth.ts:10 and auth.ts:99) always land in exactly one bucket (auth.ts).
Dispatch one fix agent per bucket, and dispatch all buckets as a single concurrent wave — there is only ever one wave in the fix flow. Because each bucket owns a disjoint set of files, and every agent works in its own isolated worktree, same-file merge conflicts are impossible by construction. This reconstructs the plan flow's file-disjoint invariant from each finding's location rather than from a step's dependsOn.
8d — Dispatch each bucket to a fix agent
For each bucket, dispatch one worktree-isolated @executor (resolve and pass its model exactly as the Model profile note under Step 3 shows). Reap orphaned worktrees first with godmode-worktree cleanup, exactly as Step 3's wave-start sweep does. Give each agent:
-
the full decoded finding records for its file — ID, lens, sev, conf, location, note from list --decode — one record per finding in the bucket;
-
the create-first first action: the orchestrator captures the build-branch HEAD ref on the build branch before dispatch (build_ref=$(git rev-parse HEAD)) and hands it to the agent as its <build-ref>, with the instruction that the agent's first action inside its worktree is "$gm/godmode-worktree" create "<build-ref>" — the same orchestrator-captures-ref / agent-creates-first contract Step 3 defines;
-
the per-step quality gates from config/quality-gates.txt (Step 4), resolved and passed exactly as the plan flow does;
-
the instruction to make the minimal change that resolves each finding in the bucket, run the gates, and on green make exactly one atomic commit for the file. There is no plan step to cite, so the message cites the finding IDs:
fix: unit $N — <summary> <file> (F3, F7)
Never --no-verify. Never bypass a gate. The agent does not push and does not merge; it returns its worktree branch name and commit hash.
8e — Mark fixed (orchestrator only)
The fix agent only implements, gates, and commits its file — it NEVER calls godmode-findings; marking a finding fixed is the orchestrator's job, done in the canonical checkout after that bucket's commit merges back, one transition per finding ID in the bucket:
gm=$(for c in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME/.claude" .; do [ -x "$c/bin/godmode-findings" ] && { echo "$c/bin"; break; }; done)
"$gm/godmode-findings" transition "$brief_dir" "$finding_id" fixed
This split is load-bearing: .planning/ is gitignored and local-only, so it is unreachable from an isolated worktree — an agent could not write the store even if it tried — and concurrent agents would race the store's atomic write. The orchestrator owns the store; the agents own the code.
8f — Failure isolation
A bucket whose agent's gates fail, whose finding cannot be fixed, or that conflicts on mergeback has none of its findings transitioned — they stay open. Reap and report that one bucket's worktree through the same Step 5b reap/report ladder the plan flow uses (godmode-worktree mergeback exit code, then targeted godmode-worktree cleanup <id> on failure). Every other bucket is unaffected and proceeds normally — buckets are independent by construction (8c).
8g — Optimistic; trust verify
The fix flow does not re-run the verify lenses to confirm a finding is gone — it is optimistic. The next /verify $N reconcile reopens any fixed finding that recurs. /build is the only writer of open → fixed; /verify never closes a finding (it only reopens via reconcile).
8h — Resumability and no clobber
Resumability comes from the fixed status itself, not from a done-set. A re-run of /build $N --fix re-reads list --open [--blocking] (8b), which excludes findings already transitioned to fixed, so a re-run targets only the still-open findings — already-fixed work is never redone. There is no done-set in the fix flow.
The fix flow MUST NOT write build complete | unit: $N to status — that label is the plan flow's Step 7 completion marker, and writing it from the fix flow would corrupt plan-flow resumability (Step 1 would wrongly report the plan as built). The fix flow leaves status alone; it may set next_command to /verify $N so /godmode points the user forward.
8i — Empty target set
If the target set (8b) is empty, report "no blocking findings to fix" (or "no open findings to fix" under --all) and stop — dispatch nothing, reap nothing, transition nothing.
8j — Confirm and Auto Mode
The fix flow inherits the confirm-before-each-wave behavior and the Auto Mode exception verbatim from the top of this skill: before the single fix wave dispatches, show its buckets (file, the findings in each, the agent dispatched) and wait for confirmation — unless ## Auto Mode Active is in context, in which case dispatch on the default choices. The per-step quality-gate block is never skipped, in either mode.
Output
After building, report:
- The waves derived from
dependsOn (and whether the plan's ## Waves section agreed, was absent, or conflicted) and the steps in each.
- For each step: the agent dispatched (
@executor/@writer), its gate results, the worktree commit hash, and how it merged back (fast-forward / merge / conflict).
- Any failed step (gate failure or merge conflict), the descendant steps skipped, and the resumable done-set recorded in
status.
- The workflow state set and the next step:
"Build complete for unit N. Run /verify N to check it against the plan."
Related
- /plan N — preceding step: writes the
PLAN.md (steps, dependsOn, ## Waves) this skill executes.
- /verify N — next step: checks the built change against the plan's verification plan.
- /debug — when a step's quality gate fails and the cause isn't obvious.
- /godmode — reads the workflow state this skill records and tells the user the next command.
Spine: /mission → /brief N → /plan N → /build N → /verify N → /ship. Build runs the plan wave by wave in isolated worktrees, one atomic, gated commit per step.
