verify-changes

name	verify-changes
disable-model-invocation	false
argument-hint	[scope: worktree | branch | last [N]]
description	Verify all recent changes: review diffs, check that appropriate unit/e2e tests exist and correctly test the changes, run all tests, manually verify UI changes with playwright-cli, fix any problems found, re-verify until clean, then report results with recommendations.

/verify-changes [scope] — Verify, Test & Fix Changes

Thoroughly verify all recent changes in the working tree (or a specified scope). Reviews diffs, checks test coverage, runs tests, manually verifies UI changes, fixes any problems found, re-verifies recursively until clean, then reports results with next-step recommendations.

Ultrathink throughout. Use careful, thorough reasoning at every step. Read the code, understand what changed and why, verify correctness — don't just skim.

NEVER verify from memory. Dispatch fresh agents. You may have just written the code being verified — that's exactly why YOU should not be the verifier. Dispatch agents to do the actual verification work. Fresh agents have no memory of the implementation and will catch things you'd miss because you "know" what the code does.

At minimum, dispatch an agent for Phase 1-2 (read diffs, audit coverage) and run tests yourself (Phase 3). For complex changes, dispatch separate agents for different verification concerns (diff review, test coverage, manual testing).

Do not produce a verification report based on what you remember doing. Context compaction means your memory of what you changed may be incomplete or wrong. The ENTIRE POINT of /verify-changes is fresh eyes on the actual state of the code, not a rubber stamp of what you think you did.

Past failure: a verification was done entirely from memory without reading a single diff or dispatching any agents — it just confirmed "looks good" based on session recall.

Arguments

/verify-changes [scope]

• scope (optional) — what changes to verify:
  • (omit) — all uncommitted changes in the working tree (default)
  • worktree — changes in the current worktree vs its base branch
  • branch — all commits on the current branch vs main
  • last — only the last commit (same as last 1)
  • last N — the last N commits

Examples: /verify-changes, /verify-changes worktree, /verify-changes last 3

Tracking Fulfillment

On entry, if a tracking ID was passed by the parent skill, create the fulfillment marker in the MAIN repo:

MAIN_ROOT=$(cd "$(git rev-parse --git-common-dir)/.." && pwd)
mkdir -p "$MAIN_ROOT/.claude/tracking"
printf 'skill: verify-changes\nid: %s\nscope: %s\nstatus: started\ndate: %s\n' \
  "$TRACKING_ID" "$SCOPE" "$(TZ=America/New_York date -Iseconds)" \
  > "$MAIN_ROOT/.claude/tracking/fulfilled.verify-changes.$TRACKING_ID"

If no tracking ID was passed (standalone invocation), skip tracking.

Phase 1 — Inventory Changes

1. Determine the diff scope based on the argument:

   • Default: git diff + git diff --cached + git status -s
   • worktree: git diff $(git merge-base HEAD main)..HEAD + git diff + git diff --cached
   • branch: git log main..HEAD --oneline + git diff main...HEAD
   • last: git diff HEAD~1..HEAD
   • last N: git diff HEAD~N..HEAD

2. List all changed files with their change type (added/modified/deleted):

   git diff --name-status [scope]
   

3. Read and understand every changed file. For each file:

   • What was the change? (new feature, bug fix, refactor, test, config)
   • What is the intent? (read commit messages, issue references, comments)
   • Does the change look correct? (logic errors, edge cases, off-by-ones)
   • Any security concerns? (XSS, injection, unsanitized input)
   • Any CLAUDE.md rule violations? (weakened tests, external deps, etc.)

4. Produce a change inventory table:

   File	Change Type	Description	Tests Needed

Phase 2 — Test Coverage Audit

For each changed file, verify appropriate tests exist:

1. Source code changes (src/**):

   • Find the corresponding test file(s) in tests/
   • Verify test cases exist that exercise the changed code paths
   • Check that tests are meaningful — not just smoke tests, but actually testing the specific behavior that changed
   • If a bug fix: does a regression test exist that would have caught the bug?
   • If a new feature: do tests cover the happy path AND edge cases?

2. Component/module changes — find corresponding test files and verify output computation, parameter handling, edge cases are tested.

3. Engine/solver changes — check analytical verification tests where applicable. Verify numerical accuracy assertions (tolerances, convergence).

4. Codegen/build changes — verify compile tests exist. Check behavioral parity between source and generated code.

5. UI/editor changes — check for E2E tests. Flag for manual verification in Phase 4.

6. Produce a coverage assessment:

   File	Test File(s)	Coverage	Gaps

   Coverage ratings: Good (meaningful tests exist), Partial (some paths untested), Missing (no tests), N/A (config, docs, etc.)

Phase 3 — Run Tests

1. Run the full test suite with output captured to a file:

   npm run test:all > .test-results.txt 2>&1
   

   Never pipe through | tail, | head, | grep — it loses output and forces re-runs. Capture once, then read .test-results.txt to find failures. This runs unit tests (~4,000), then auto-detects whether the dev server and cargo are available for E2E and codegen tests.

2. If tests fail, diagnose with targeted runs. Read .test-results.txt to identify the failing test file, then run ONLY that file:

   node --test tests/the-failing-file.test.js
   

   Do NOT re-run npm run test:all to diagnose — that wastes 5 minutes when the single file takes 30 seconds. Use test:all only as the final gate after fixes.

3. Pre-existing failure protocol. If a test fails in code you didn't touch, it may be pre-existing — not caused by the changes you're verifying. This also applies when you've hit the max 2 fix attempts on a failure and suspect the root cause predates your changes.

   a. Verify it's pre-existing: check git log --oneline -5 -- <test-file> and git log --oneline -5 -- <source-file>. If neither was modified by the changes under review, the failure predates your work.

   b. Research and file a GitHub issue (gh issue create) with:

   • Title: Test failure: <test name>
   • Verbatim error output from .test-results.txt
   • The exact assert.* line from the test source (read the test code)
   • Reproduction command: node --test tests/<file>.test.js
   • git log evidence that the failure predates current changes
   • Label: test-restore

   c. Mark the test skipped referencing the issue:

   • Change it('name', to it.skip('name // #NNN',
   • Commit the skip and the issue number together

   d. Re-run the failing test file to confirm the skip works, then run npm run test:all > .test-results.txt 2>&1 as the final gate.

   e. Guardrails:

   • Never skip a test in a file you modified or that tests code you modified
   • Never skip a test you wrote
   • If you're about to skip a 3rd test in one session, STOP and report to the user — 3+ pre-existing failures suggests a systemic problem

4. Record results:

   Suite	Result	Failures

Post-tests tracking

After recording test results (pass or fail), create the tests-run step marker if a tracking ID is present:

MAIN_ROOT=$(cd "$(git rev-parse --git-common-dir)/.." && pwd)
printf 'result: %s\ncompleted: %s\n' "$TEST_RESULT" "$(TZ=America/New_York date -Iseconds)" \
  > "$MAIN_ROOT/.claude/tracking/step.verify-changes.$TRACKING_ID.tests-run"

Phase 4 — Agent Verification + User Verification Classification

Two types of verification — both are mandatory for UI changes:

Agent verification (MANUAL): The agent tests the change via playwright-cli. This is YOUR job. You MUST do this for any change that touches UI files. The pre-commit hook will block commits if playwright-cli wasn't used in the session when UI files are staged. This is not optional.

User verification (USER): Some changes need the HUMAN to see them — judgment calls about animation quality, visual layout, UX feel. The agent flags these but cannot close them. Mechanically classified: if UI/editor/styles files changed → User Verify: NEEDED. /fix-report Step 2 presents these to the user before closing.

Agent verification steps

Use the /manual-testing skill for recipes, selectors, and setup instructions.

"No dev server" is not an excuse to skip. If UI files changed and no dev server is running, START ONE:

npm start &

Wait a few seconds, then proceed. The dev server is a static file server — it takes 2 seconds to start. Reporting "N/A (no dev server)" when you could have started one is skipping, not verifying.

1. For each UI/interaction change:

   • Start a dev server if one isn't running
   • Follow /manual-testing setup (auth bypass, browser open)
   • Reproduce the scenario that exercises the change using real events
   • Take screenshots as evidence
   • Verify the expected behavior occurs
   • Test edge cases (undo/redo, rapid clicks, empty inputs, etc.)

2. For non-UI changes, verify manually where possible:

   • Solver changes: build a small test model, run simulation, check output
   • Block changes: place the block, configure params, run sim, verify scope output
   • Import/export: load a test file, verify round-trip

3. Record verification results with both columns:

   Change	Agent Verify	User Verify
   Button offset fix	PASS (screenshot)	NEEDED
   Solver tolerance	PASS (tests)	N/A

   Skip agent verification ONLY if no changes are UI-related or manually verifiable. User Verify is always classified (NEEDED or N/A) based on file paths.

4. For each User Verify: NEEDED item, include verification instructions:

   • What to look at (specific UI element, interaction, visual behavior)
   • How to reproduce (steps: open app, navigate to X, click Y, observe Z)
   • What "correct" looks like (expected appearance, behavior, output)
   • URL: http://localhost:$(bash scripts/port.sh)/

   The user may be verifying hours later in a different context. "NEEDED" without instructions is useless — the user won't know what to check.

Post-manual-verification tracking

After completing agent verification (Phase 4), if UI changes were verified and a tracking ID is present, create the manual-verified step marker:

MAIN_ROOT=$(cd "$(git rev-parse --git-common-dir)/.." && pwd)
printf 'ui_changes: true\ncompleted: %s\n' "$(TZ=America/New_York date -Iseconds)" \
  > "$MAIN_ROOT/.claude/tracking/step.verify-changes.$TRACKING_ID.manual-verified"

Only create this marker if UI files were actually verified in Phase 4. Skip for non-UI changes.

Phase 5 — Fix Problems

If any issues were found in Phases 2-4:

1. Test gaps — write the missing tests:

   • Unit tests for uncovered code paths
   • Regression tests for bug fixes
   • E2E tests for UI changes (if appropriate)

2. Test failures — fix the root cause:

   • Never weaken tests to make them pass. Fix the code, not the test.
   • If the test itself is genuinely wrong (testing the wrong expected value), fix the test and document why.
   • Never modify the working tree to check if a failure is pre-existing. No git stash && npm test && git stash pop, no checkout of old commits, no comparison worktrees. If you touched code and tests fail, assume your changes caused it and fix them. See CLAUDE.md for the full rule and the past failure that motivated it.

3. Code issues — fix logic errors, edge cases, security concerns found in Phase 1.

4. Manual verification failures — fix the behavior, then re-verify.

5. If working in a worktree, commit fixes so they are preserved for cherry-pick. Use descriptive commit messages referencing what was fixed.

Phase 6 — Re-verify (max 2 rounds)

After fixing any issues in Phase 5:

1. Run npm run test:all again — all suites must pass, including new tests
2. Re-check manual verifications if fixes touched UI code
3. If new problems are found, go back to Phase 5

Maximum 2 fix+verify rounds. If the same error recurs after two fix attempts, STOP. Report what was tried, what failed both times, and why you think it's failing. Do not keep guessing — let the user decide. (See CLAUDE.md: "NEVER thrash on a failing fix.")

Phase 7 — Report

Always output the report inline. Additionally, write the report FILE to reports/verify-{scope-slug}.md and regenerate the index — but ONLY if there are User Verify: NEEDED items that require human sign-off. If all items are clean (no [ ] checkboxes), say so inline and skip the file:

Verification clean — no user sign-off needed. [summary of what passed]

The report file exists for the user to review LATER. If there's nothing to review later, the inline output is sufficient.

Worktree write path: Reports are ALWAYS written to the main repo's reports/ directory, not the worktree's. When running inside a worktree, resolve the main repo root first:

MAIN_ROOT=$(cd "$(git rev-parse --git-common-dir)/.." && pwd)

Then write to $MAIN_ROOT/reports/ and $MAIN_ROOT/VERIFICATION_REPORT.md. This prevents reports from being lost when the worktree is cleaned up.

Scope slug derivation

Scope argument	Report file
(default/omit)	reports/verify-working-tree.md
worktree	reports/verify-worktree-{name}.md (name = basename of worktree path)
branch	reports/verify-branch-{branch-name}.md
last N	reports/verify-last-{N}.md
last	reports/verify-last-1.md

Report structure

Header:

# Verification Report — YYYY-MM-DD HH:MM
Scope: [default | worktree | branch | last N]
{One-line summary.} **Check the User column and sign off.**
Legend: ✅ verified, ⚠️ partial, ❌ failed, ➖ not applicable, [ ] not yet checked

Changes Reviewed — inventory table at the top:

## Changes Reviewed
| File | Change | Verdict |
|------|--------|---------|

Domain-grouped sections — group by concern (UI/UX, Codegen, etc.), NOT by workflow state. Each section uses a single-checkbox checklist (no summary table + detail card dual-checkbox pattern):

## UI / UX Changes

- [ ] **#358** — Block Rotation
  1. Right-click a block and select Rotate
  2. Ports should move to the correct sides
  3. Block label should stay horizontal
  ![rotation](.playwright/output/358-rotation-90deg.png)

- [ ] **#401** — Tooltip positioning
  1. Hover near canvas edge
  2. Verify tooltip doesn't clip off-screen

One checkbox per verifiable item. Include verification steps and screenshots directly under each checkbox. One item per distinct thing to verify — not "3 blocks in explorer" but one per block.

Outcome sections (include only non-empty):

• Skipped Verification — per-item reason
• Pre-existing Bugs Discovered — found during verification
• Test Suite Status — command + per-suite counts

Recommendations:

• Next steps (commit, push, review)
• Open concerns needing human judgment

Index regeneration

After writing the scope-specific report, regenerate VERIFICATION_REPORT.md in the repo root as an index of all verification reports:

1. Scan reports/verify-*.md files
2. For each file: extract the H1 line (date, scope) and count [ ] checkboxes (action items remaining)
3. Write VERIFICATION_REPORT.md with this structure:

# Verification Reports Index

Legend: ✅ all signed off, [ ] action items remain

## Needs Sign-off

{Extract ALL `[ ]` items from all reports. For each, show the checkbox,
the item title, and link to the source report file.}

- [ ] Block Rotation sign-off — [verify-working-tree.md](reports/verify-working-tree.md)
- [ ] Solver tolerance sign-off — [verify-last-3.md](reports/verify-last-3.md)

{If no `[ ]` items remain across any report, write: "All items signed off."}

**Staleness rule:** Reports older than 7 days with unchecked `[ ]` items are
flagged as **STALE** in the index (append ` ⚠️ STALE` to the action items
column). Stale items are never auto-removed — the user decides whether to
re-verify or dismiss them.

---

## Reports

| Report | Date | Scope | Action Items |
|--------|------|-------|:------------:|
| [verify-working-tree.md](reports/verify-working-tree.md) | 2026-03-18 14:30 | working tree | 2 [ ] |
| [verify-last-3.md](reports/verify-last-3.md) | 2026-03-17 09:15 | last 3 | ✅ |

If there are no reports/verify-*.md files (e.g., all were cleaned up), write just the header and "No verification reports found."

Post-report tracking

After writing the report (or confirming verification is clean), create the complete step marker and update the fulfillment file if a tracking ID is present:

MAIN_ROOT=$(cd "$(git rev-parse --git-common-dir)/.." && pwd)
printf 'completed: %s\n' "$(TZ=America/New_York date -Iseconds)" \
  > "$MAIN_ROOT/.claude/tracking/step.verify-changes.$TRACKING_ID.complete"

printf 'skill: verify-changes\nid: %s\nscope: %s\nstatus: complete\ndate: %s\n' \
  "$TRACKING_ID" "$SCOPE" "$(TZ=America/New_York date -Iseconds)" \
  > "$MAIN_ROOT/.claude/tracking/fulfilled.verify-changes.$TRACKING_ID"

Key Rules

• Never commit, merge, or push without explicit user permission — unless working in a worktree where committing fixes is part of the workflow (Phase 5). Even then, never merge the worktree into main or push.
• Never weaken tests. Fix the code, not the test. Do not loosen tolerances, skip assertions, or remove test cases.
• Ultrathink. Use careful, thorough reasoning throughout. Read code carefully. Understand what changed and why before judging correctness.
• Never verify from memory. Read actual diffs, actual files, run actual tests. Even if you just wrote the code — read it again. Memory is not verification.
• Real events for manual testing. Never use eval or page.evaluate() to simulate user actions. Use real click/drag/type/press events.
• Fix, don't just report. When problems are found, fix them — then re-verify. The goal is a clean verification, not a list of issues left for the user.
• Start a dev server if needed. "No dev server" is not an excuse to skip manual verification. Run npm start & — it takes 2 seconds. Only report "cannot verify" for genuinely unavailable tooling (e.g., no cargo for codegen).
• Be thorough but honest. If something genuinely can't be verified, say so explicitly. Don't skip silently.
• Respect existing changes. Never discard, revert, or overwrite uncommitted work that isn't part of the verification scope.