debugger

name	debugger
description	IDA debugger operations. Use when asked to set breakpoints, patch bytes, add conditions, or manage a patch inventory.
allowed-tools	["Bash","Read","Glob","Grep"]

---

Trigger Intents

Use this skill when user asks to:

• add/remove/modify breakpoints
• patch bytes or revert patches
• create patch inventories and debugging action plans
• instrument analysis-driven break/watch workflows

Route to:

• analysis/xrefs for selecting meaningful targets first
• disassembly for opcode-level patch context
• annotations for documenting patch rationale and outcomes

---

Do This First (Warm-Start Sequence)

-- 1) Current breakpoint inventory
SELECT printf('0x%X', addr) AS addr, type_name, enabled
FROM breakpoints
ORDER BY addr;

-- 2) Current patch inventory (fast: backed by IDA's patch list)
SELECT printf('0x%X', addr) AS addr, original_value, value AS patched_value
FROM bytes WHERE is_patched = 1
ORDER BY addr
LIMIT 50;

-- 3) Validate target bytes before patch
SELECT addr, value, original_value, is_patched
FROM bytes
WHERE addr = 0x401000;

Interpretation guidance:

• Confirm existing instrumentation before adding more.
• Always snapshot current/original byte state before mutating.

---

Failure and Recovery

• Breakpoint insert/update failed:
  • Validate address existence and hardware size/type compatibility.
• Patch verification mismatch:
  • Re-read bytes (and WHERE is_patched = 1), then retry with precise address.
• Unintended patch side effects:
  • Revert with DELETE FROM bytes WHERE addr = ... and reassess target instruction context.

---

Handoff Patterns

1. debugger -> disassembly to validate instruction semantics around patch site.
2. debugger -> xrefs to assess blast radius of patched/broken call paths.
3. debugger -> annotations to leave durable analyst breadcrumbs.

---

breakpoints

Debugger breakpoints. Supports full CRUD (SELECT, INSERT, UPDATE, DELETE). Breakpoints persist in the IDB even without an active debugger session. folder_path is the folder-oriented spelling of IDA's breakpoint group; updating either updates the same underlying breakpoint grouping.

Column	Type	RW	Description
addr	INT	R	Breakpoint address
enabled	INT	RW	1=enabled, 0=disabled
type	INT	RW	Breakpoint type (1=hw_write, 2=hw_read, 3=hw_rdwr, 4=software, 8=hw_exec)
type_name	TEXT	R	Type name (software, hardware_write, etc.)
size	INT	RW	Breakpoint size (for hardware breakpoints)
flags	INT	RW	Breakpoint flags
pass_count	INT	RW	Pass count before trigger
condition	TEXT	RW	Condition expression
loc_type	INT	R	Location type code
loc_type_name	TEXT	R	Location type (absolute, relative, symbolic, source)
module	TEXT	R	Module path (relative breakpoints)
symbol	TEXT	R	Symbol name (symbolic breakpoints)
offset	INT	R	Offset (relative/symbolic)
source_file	TEXT	R	Source file (source breakpoints)
source_line	INT	R	Source line number
is_hardware	INT	R	1=hardware breakpoint
is_active	INT	R	1=currently active
group	TEXT	RW	Breakpoint group name
bptid	INT	R	Breakpoint ID
folder_path	TEXT	RW	Alias for breakpoint group folder; NULL means root
full_path	TEXT	R	Full breakpoint dirtree path when available

-- List all breakpoints
SELECT printf('0x%08X', addr) as addr, type_name, enabled, condition
FROM breakpoints;

-- Add software breakpoint
INSERT INTO breakpoints (addr) VALUES (0x401000);

-- Add hardware write watchpoint
INSERT INTO breakpoints (addr, type, size) VALUES (0x402000, 1, 4);

-- Add conditional breakpoint (at a different address than the plain one above)
INSERT INTO breakpoints (addr, condition) VALUES (0x401330, 'eax == 0');

-- Move breakpoint into/out of an IDA breakpoint folder
UPDATE breakpoints SET folder_path = 'idasql/breakpoints/network' WHERE addr = 0x401000;
UPDATE breakpoints SET folder_path = NULL WHERE addr = 0x401000;

-- Disable a breakpoint
UPDATE breakpoints SET enabled = 0 WHERE addr = 0x401000;

-- Delete a breakpoint
DELETE FROM breakpoints WHERE addr = 0x401000;

-- Find which functions have breakpoints
SELECT b.addr, f.name, b.type_name, b.enabled
FROM breakpoints b
JOIN funcs f ON b.addr >= f.addr AND b.addr < f.end_addr;

---

bytes (Byte Patching)

Pure mapped-byte program view with patch support. This table is one row per mapped byte address; IDA item metadata such as size/type belongs to heads.

Column	Type	RW	Description
addr	INT	R	Byte address
value	INT	RW	Current byte value (UPDATE patches 1 byte)
word	INT	RW	2-byte little-endian value (UPDATE patches 2 bytes)
dword	INT	RW	4-byte little-endian value (UPDATE patches 4 bytes)
qword	INT	RW	8-byte little-endian value (UPDATE patches 8 bytes)
original_value	INT	R	Original byte value before patch
is_patched	INT	R	1 if byte differs from original (WHERE is_patched = 1 enumerates patches fast)
fpos	INT	R	Physical/input file offset (NULL when unavailable)

Revert a patch with DELETE FROM bytes WHERE addr = ... (or WHERE is_patched = 1).

-- Read one address
SELECT addr, value, original_value, is_patched
FROM bytes WHERE addr = 0x401000;

-- Read a byte range, including item-tail bytes
SELECT addr, value
FROM bytes
WHERE addr >= 0x401000 AND addr < 0x401010
ORDER BY addr;

-- Get item metadata separately
SELECT addr, size, type, flags, disasm
FROM heads
WHERE addr = 0x401000;

-- Patch via table update (single byte, or width columns word/dword/qword)
UPDATE bytes SET value = 0x90 WHERE addr = 0x401000;
UPDATE bytes SET dword = 0x90909090 WHERE addr = 0x401000;  -- little-endian

-- Inspect patch inventory (fast: backed by IDA's patch list)
SELECT printf('0x%X', addr) AS addr, original_value, value AS patched_value
FROM bytes WHERE is_patched = 1 ORDER BY addr LIMIT 20;

-- Persist once done
SELECT save_database();

---

bytes — Patching (write surface)

All byte patching is done through the writable bytes table.

Column	RW	Meaning
value	RW	Current byte; UPDATE patches 1 byte
word / dword / qword	RW	UPDATE patches 2/4/8 bytes little-endian
original_value	R	Original (pre-patch) byte
is_patched	R	1 if patched; WHERE is_patched = 1 enumerates patches fast

SELECT printf('0x%X', addr) AS addr,
       printf('0x%02X', original_value) AS old,
       printf('0x%02X', value) AS new
FROM bytes WHERE is_patched = 1
ORDER BY addr;

---

Byte Access via the bytes Table

All byte reads and patches go through the bytes table. Bounded-read shapes are documented in data; this skill focuses on the patching workflow. load_file_bytes(...) writes a file's bytes into the IDB at a given range; use it when the patch content already lives in a file.

Function / Shape	Description
SELECT hex(blob_concat(value)) FROM (SELECT value FROM bytes WHERE start_addr = X AND n = N ORDER BY addr)	Read N bytes as uppercase hex
SELECT blob_concat(value) FROM (SELECT value FROM bytes WHERE start_addr = X AND n = N ORDER BY addr)	Read N bytes as BLOB
load_file_bytes(path, file_offset, addr, size[, patchable])	Write a file's bytes into the IDB at the target range

-- Read 16 bytes as hex
SELECT hex(blob_concat(value))
FROM (SELECT value FROM bytes WHERE start_addr = 0x401000 AND n = 16 ORDER BY addr);

-- Patch one byte (example: NOP) and a 4-byte little-endian value
UPDATE bytes SET value = 0x90 WHERE addr = 0x401000;
UPDATE bytes SET dword = 0x90909090 WHERE addr = 0x401000;

-- Verify current vs original
SELECT value AS current, original_value AS original
FROM bytes WHERE addr = 0x401000;

-- Revert patch (one byte, or every patch)
DELETE FROM bytes WHERE addr = 0x401000;
DELETE FROM bytes WHERE is_patched = 1;

-- Persist patches explicitly
SELECT save_database();

---

Analysis-Driven Breakpoint Workflows

Set breakpoints on all callers of a security-sensitive API

Use disasm_calls to find every call site and batch-insert breakpoints:

-- Breakpoint on every call to VirtualAlloc (or similar)
INSERT INTO breakpoints (addr)
SELECT addr FROM disasm_calls WHERE callee_name LIKE '%VirtualAlloc%';

-- Verify
SELECT printf('0x%08X', addr) AS addr, type_name, enabled
FROM breakpoints;

Watchpoints on struct fields discovered via type analysis

After recovering a struct, set hardware watchpoints on specific field offsets:

-- Hardware write watchpoint on a 4-byte field (e.g., config.flags at base+0x10)
-- First, find where the struct base is stored (requires manual analysis)
INSERT INTO breakpoints (addr, type, size) VALUES (0x402010, 1, 4);
-- type=1 is hardware_write, size=4 for DWORD field

Conditional breakpoints from decompiler analysis

Set breakpoints that only trigger when specific conditions are met:

-- Break when first argument (rcx on x64 fastcall) equals a specific enum value
INSERT INTO breakpoints (addr, condition)
VALUES (0x401000, 'rcx == 3');

-- Break on error return
INSERT INTO breakpoints (addr, condition)
VALUES (0x401050, 'rax == 0xFFFFFFFF');

---

Patching Workflows

NOP out anti-debug checks

Find and neutralize IsDebuggerPresent checks:

-- Find calls to IsDebuggerPresent
SELECT dc.addr, (SELECT name FROM funcs WHERE dc.func_addr >= addr AND dc.func_addr < end_addr LIMIT 1) AS func_name,
       disasm_at(dc.addr, 2) AS context
FROM disasm_calls dc
WHERE dc.callee_name LIKE '%IsDebuggerPresent%';

-- Patch the conditional jump after the check (example: jnz → nop nop)
-- First inspect the instruction after the call
SELECT disasm_at(0x401030, 3);
-- Then patch (adjust addresses based on actual binary)
UPDATE bytes SET value = 0x90 WHERE addr = 0x401035;
UPDATE bytes SET value = 0x90 WHERE addr = 0x401036;

Inventory all patches and generate report

-- Full patch report: what was changed and where
SELECT printf('0x%X', addr) AS addr,
       (SELECT name FROM funcs WHERE addr >= addr AND addr < end_addr LIMIT 1) AS func_name,
       printf('0x%02X', original_value) AS original,
       printf('0x%02X', value) AS patched,
       disasm_at(addr) AS context
FROM bytes WHERE is_patched = 1
ORDER BY addr;

---

Performance Notes

Table	Size	Constraint	Notes
breakpoints	Small (<100 typical)	none needed	Always fast
bytes	All mapped bytes	addr	Critical — constrain to one address or a tight range
bytes WHERE is_patched = 1	Small (patch count)	is_patched = 1	Fast — iterates only patched locations via IDA's patch list

• breakpoints table is small — full scans are fine.
• bytes table emits one row per mapped byte. Use WHERE addr = X or a tight addr range.
• bytes WHERE is_patched = 1 iterates only patched locations — always fast.

---

See Also

• disassembly — instruction context around a patch site (disasm_at, operand semantics).
• annotations — record patch rationale via comments/bookmarks before mutating.
• data — canonical owner of byte-read shapes (table vs. scalar disambiguation).