dayz-build-pbo

name	dayz-build-pbo
description	Pack a scaffolded mod from workspace/<ModName>/ into a .pbo at P:\Mods\@<ModName>\Addons\ via DayZ Tools AddonBuilder. Gates on /dayz-preflight, verifies the P:\<ModName>\ junction created by /dayz-new-mod, surfaces AddonBuilder output live. Default is binarized output; --clean wipes the target dir first.

Path note: <skill-dir> in commands below is the absolute path of this skill's folder. When the agent loads this skill the harness exposes the skill's base directory; substitute it before running. Sibling skills are reached via <skill-dir>\..\dayz-X\.

/dayz-build-pbo

Package a DayZ mod scaffold into a deployable .pbo and place it under P:\Mods\@<ModName>\Addons\ so the engine can load it. Gates on /dayz-preflight and the P:\<ModName>\ junction created by /dayz-new-mod. Reuses find_dayz_tools() from preflight per the L2 rule — no copy-paste path discovery.

Follow .claude/skills/_shared/dayz-conventions.md.

How to run

python "<skill-dir>\build.py" <ModName> [--clean]

Argument	Required?	Notes
<ModName>	yes	Must match an existing scaffold under workspace/<ModName>/ with the P:\<ModName>\ junction in place.
--clean	no	Passes -clear to AddonBuilder, wiping P:\Mods\@<ModName>\Addons\ before building. Use after large refactors or when chasing a stale-asset bug.

What it does

1. Preflight gate — runs /dayz-preflight; halts on non-zero.
2. Workspace check — verifies workspace/<ModName>/ exists and contains config.cpp + $PBOPREFIX$.
3. Junction check — verifies P:\<ModName>\ is a link pointing at workspace/<ModName>/ (created by /dayz-new-mod). If the link is missing or points elsewhere, halts with a clear message.
4. Tools check — resolves AddonBuilder.exe via find_dayz_tools() (env var → registry → Steam paths). Halts if not found.
5. Prepare paths — ensures P:\Mods\@<ModName>\Addons\ and P:\temp\<ModName>\ exist.
6. Build — invokes AddonBuilder.exe P:\<ModName> P:\Mods\@<ModName>\Addons -prefix=<ModName> -temp=P:\temp\<ModName> [-clear]. AddonBuilder's stdout/stderr stream live so you see binarization progress and config errors as they happen.
7. Verify output — confirms P:\Mods\@<ModName>\Addons\<ModName>.pbo exists and is newer than the build start.
8. Drop ownership marker — writes P:\Mods\@<ModName>\.agentic-z-scaffold (single line: the modname). dayz-clean-workspace requires this file before it will remove the deployed dir, so we never delete a deployed mod we didn't produce. Sits one level above Addons/ so --clean's -clear doesn't wipe it.
9. Cleanup — removes P:\temp\<ModName>\ on success (kept on failure for debugging).

Refuses to run if

• /dayz-preflight returns non-zero.
• workspace/<ModName>/ is missing.
• workspace/<ModName>/config.cpp or $PBOPREFIX$ is missing.
• P:\<ModName>\ doesn't exist, isn't a link, or points somewhere other than workspace/<ModName>/. (Run /dayz-new-mod <ModName> to scaffold and create the junction.)
• AddonBuilder.exe isn't found (set DAYZ_TOOLS_PATH or install via Steam).
• AddonBuilder exits non-zero — exit code propagates and the temp dir is preserved for inspection.

Output

Success:

DayZ preflight
[OK]    P:\ is mounted
[OK]    DayZ Tools found: C:\Program Files (x86)\Steam\steamapps\common\DayZ Tools
[OK]    Vanilla data found: P:\dz
[OK]    Workshop deploy folder exists: P:\Mods

Preflight complete.
[OK]    workspace\MyMod\ found
[OK]    P:\MyMod junction valid
[OK]    AddonBuilder: C:\Program Files (x86)\Steam\steamapps\common\DayZ Tools\Bin\AddonBuilder\AddonBuilder.exe

[AddonBuilder] ... live output ...

[OK]    Built: P:\Mods\@MyMod\Addons\MyMod.pbo (12,345 bytes)
[OK]    Cleaned temp dir

Failure (any step):

[FAIL] <reason>
       <hint or next step>

Do not

• Don't try to write the PBO outside P:\Mods\@<ModName>\Addons\. The engine only loads from P:\Mods\ for in-development mods.
• Don't manage the P:\<ModName>\ junction here — that's /dayz-new-mod's job. If the junction is missing or wrong, fail and direct the user to scaffold first.
• Don't re-implement Tools path discovery — import find_dayz_tools from dayz-preflight/preflight.py.
• Don't auto-binarize off — keep binarization on by default. (A --no-binarize flag can be added later if iteration speed becomes a problem.)