usd-articulation

name

usd-articulation

description

Validate and build multi-arm robot articulations in USD for Isaac Sim 6 / Lab. Covers programmatic assembly (chassis + arms + `FixedJoint`s), `ArticulationRootAPI` placement, the modern Isaac Robot Schema overlay (`IsaacRobotAPI`, `IsaacLinkAPI`, `IsaacJointAPI`, `IsaacSiteAPI`, `IsaacNamedPose`, `KinematicChain`), `PopulateRobotSchemaFromArticulation` for retrofitting existing USDs, flatten-before-deploy, and the validation checklist (articulation roots, joint connections, robot-schema integrity, floating arms). Use when creating multi-limb robots in USD, retrofitting an existing articulation with the Robot Schema, debugging "floating arms" or disconnected geometry, or flattening articulations for deployment to Isaac Lab.

USD Articulation — Multi-Arm Robots

Two layers stack on a robot USD:

1. Physics: UsdPhysics.ArticulationRootAPI, UsdPhysics.Joint, UsdPhysics.RigidBodyAPI, PhysxSchema.PhysxArticulationAPI.
2. Robot Schema (usd.schema.isaac.robot_schema): semantic overlay used by isaacsim.robot.poser, the importers, manipulators examples, and any tool that walks "this robot's links / joints / named poses".

Rule: visual plausibility is not mechanical correctness. If it doesn't articulate, it doesn't exist.

Multi-arm assembly (correct pattern)

from pxr import Usd, UsdGeom, UsdPhysics, Sdf, Gf

# Spawn chassis
chassis = stage.DefinePrim("/World/Robot", "Xform")
chassis.GetReferences().AddReference(CHASSIS_USD)

# Spawn arms as children
left = stage.DefinePrim("/World/Robot/LeftArm", "Xform")
left.GetReferences().AddReference(ARM_USD)
UsdGeom.Xformable(left).AddTranslateOp().Set(Gf.Vec3d(0.0, 0.6, 0.5))

# REQUIRED: FixedJoint connecting arm to chassis
joint = UsdPhysics.FixedJoint.Define(stage, "/World/Robot/LeftArmAttachment")
joint.CreateBody0Rel().SetTargets([Sdf.Path("/World/Robot/.../Chassis")])
joint.CreateBody1Rel().SetTargets([Sdf.Path("/World/Robot/LeftArm/.../BaseMount")])

# REQUIRED: Remove ArticulationRootAPI from arm (only chassis keeps it)
arm_prim = stage.GetPrimAtPath("/World/Robot/LeftArm/...")
arm_prim.RemoveAPI(UsdPhysics.ArticulationRootAPI)

What does not work

• Referencing the same arm USD twice via sublayer composition.
• Using over "Geometry" to add arms in a parts layer.
• Assuming visual presence equals physical attachment.

Robot Schema overlay (Kit 110)

Apply the modern Isaac Robot Schema on top of the physics layer. The URDF/MJCF importers do this automatically; for hand-authored or retrofitted USDs apply it manually.

from pxr import Usd
from usd.schema.isaac.robot_schema import (
    Classes, Attributes,
    ApplyRobotAPI, ApplyLinkAPI, ApplyJointAPI, ApplySiteAPI,
    CreateNamedPose, CreateSurfaceGripper,
    PopulateRobotSchemaFromArticulation, GenerateRobotLinkTree, GetAllNamedPoses,
)

stage = Usd.Stage.Open("/path/robot.usd")
robot_prim = stage.GetPrimAtPath("/World/Robot")

# IsaacRobotAPI on the root: stores robot_type, ordered link/joint relations.
ApplyRobotAPI(robot_prim)
robot_prim.GetAttribute(Attributes.ROBOT_TYPE).Set("Mobile Manipulators")
# Or pick from get_allowed_tokens(Attributes.ROBOT_TYPE) — tokens include:
#   Default, End Effector, Manipulator, Humanoid,
#   Wheeled, Holonomic, Quadruped, Mobile Manipulators, Aerial.

# IsaacLinkAPI on each rigid link; IsaacJointAPI on each joint.
for link in (link_prims):  # walk articulated links
    ApplyLinkAPI(link)
for joint in (joint_prims):
    ApplyJointAPI(joint)

# IsaacSiteAPI on grasp / mount / reference frames (replaces deprecated
# IsaacReferencePointAPI).
ApplySiteAPI(grasp_frame_prim)

# One-shot retrofit: populate ordered link/joint graph from an existing
# Articulation (uses physics traversal to fill ROBOT_LINKS / ROBOT_JOINTS).
PopulateRobotSchemaFromArticulation(stage, robot_prim)

Schema	Applied to	Role
IsaacRobotAPI (Classes.ROBOT_API)	robot root	robot_type, ordered link/joint relations, named-pose container
IsaacLinkAPI (Classes.LINK_API)	each rigid link	mass/visual aux for tools that walk the chain
IsaacJointAPI (Classes.JOINT_API)	each joint	semantic joint metadata
IsaacSiteAPI (Classes.SITE_API)	grasp / mount / reference frames	named frames for IK targets, mounts, sensors
IsaacNamedPose (Classes.NAMED_POSE)	pose container prims	stored joint configurations (see manipulation-ik)
Classes.SURFACE_GRIPPER	end-effector site	author surface gripper via CreateSurfaceGripper
Classes.ATTACHMENT_POINT_API	site or link	attachment points used by accessory tooling

Validation checklist

Before trusting any multi-arm robot:

1. Exactly 1 UsdPhysics.ArticulationRootAPI on the chassis, nowhere else.
2. FixedJoints connect each arm BaseMount to the chassis.
3. Joint count matches: N arm joints per arm + chassis joints.
4. IsaacRobotAPI present on the root; robot_type set to a valid token.
5. ROBOT_LINKS / ROBOT_JOINTS relations populated (call PopulateRobotSchemaFromArticulation if not).
6. Each grasp frame carries IsaacSiteAPI (not deprecated IsaacReferencePointAPI).
7. Render from four angles (front, side, 3/4, top).
8. Send to a vision LLM with a binary question ("Arms attached? PASS/FAIL").

Validation snippet (self-contained)

Run via $ISAAC_SIM_DIR/python.sh. Enforces exactly one ArticulationRootAPI, prints joints and connected bodies, flags arms whose BaseMount is not bound to the chassis via a FixedJoint, and reports the Robot Schema state.

import sys
from pxr import Usd, UsdPhysics, Sdf
from usd.schema.isaac.robot_schema import Classes, Attributes, GetAllNamedPoses

stage = Usd.Stage.Open(sys.argv[1])

art_roots = [p.GetPath() for p in stage.Traverse() if p.HasAPI(UsdPhysics.ArticulationRootAPI)]
print(f"ArticulationRootAPI count: {len(art_roots)} -- {art_roots}")
assert len(art_roots) == 1, "must be exactly 1 articulation root"

joints = [p for p in stage.Traverse() if p.IsA(UsdPhysics.Joint)]
chassis_paths = {str(art_roots[0])}
attached_arms = set()
for j in joints:
    j_api = UsdPhysics.Joint(j)
    b0 = j_api.GetBody0Rel().GetTargets()
    b1 = j_api.GetBody1Rel().GetTargets()
    if j.IsA(UsdPhysics.FixedJoint) and any(str(t).startswith(p) for t in b0 for p in chassis_paths):
        attached_arms.update(str(t) for t in b1)
print(f"Joints: {len(joints)} | FixedJoint-attached children: {sorted(attached_arms)}")

# Robot Schema overlay
robots = [p for p in stage.Traverse() if p.HasAPI(Classes.ROBOT_API)]
()
 r  robots:
    rt = r.GetAttribute(Attributes.ROBOT_TYPE).Get()
    poses = GetAllNamedPoses(stage, r)
    ()

Extend with whatever arm/leg path patterns your asset uses. Binary goal: exactly one root, every limb connected to the chassis via a FixedJoint or articulated joint chain, and the Robot Schema overlay present.

Common failures

Symptom	Cause	Fix
Arms render but float	No FixedJoint to chassis	add FixedJoint
Multiple articulation roots	Arm USD has its own root	RemoveAPI(UsdPhysics.ArticulationRootAPI) from arms
Training works but arms independent	Separate articulation trees	single root + FixedJoints
RobotPoser.solve_ik() errors out	missing IsaacRobotAPI / link relations	ApplyRobotAPI + PopulateRobotSchemaFromArticulation
Importer applied IsaacReferencePointAPI	older asset	re-import with current Isaac Sim, or migrate to IsaacSiteAPI (deprecation warning)
robot_type attribute value rejected	typo or stale token	pick from get_allowed_tokens(Attributes.ROBOT_TYPE)