mergify-stack

name	mergify-stack
description	Use Mergify stacks for git push, commit, branch, and PR creation. ALWAYS use this skill when pushing code, creating commits, creating branches, or creating PRs. Triggers on push, commit, branch, PR, pull request, stack, stacked, git, rebase, checkout, reorder, move, sync, amend, note, revision history.

Mergify Stack Workflow

Stack Philosophy

A branch is a stack. Keep stacks short and focused:

• A stack should only contain commits that depend on each other
• Rationale: longer stacks take longer to merge

Proactive stack management:

• If an existing stack can be split into independent stacks, offer to do so
• When asked to do something new: if it can be done on a separate branch, either do so or ask if in doubt
• Default to creating a new branch for unrelated changes

Core Conventions

• Push: Use mergify stack push (never git push)
• Fixes: Use git commit --amend (never create new commits to fix issues)
• Amend notes: When amending a commit that already has a PR (i.e. has been pushed), attach a mergify stack note BEFORE mergify stack push to record why the commit was amended. The note appears in the PR's "Revision history" comment and JSON marker, so reviewers can see the reason without diffing.
• Mid-stack fixes: Stash any local changes first (git stash -u), then use mergify stack edit <SHA-or-Change-Id-prefix> to pause the rebase at the target commit. Amend it with git commit --amend, then git rebase --continue, then mergify stack push, then git stash pop. Non-interactive — never use git rebase -i for this. (Calling mergify stack edit with no argument falls back to a fully interactive git rebase -i and will hang in agent contexts — always pass a commit prefix.)
• Reordering: Stash any local changes first (git stash -u), then use mergify stack reorder (list all commits in desired order) or mergify stack move (move a single commit) instead of manual git rebase -i — non-interactive and avoids GIT_SEQUENCE_EDITOR quoting issues
• Fixup: Stash any local changes first (git stash -u), then use mergify stack fixup <SHA>... to fold a commit into its parent (drops the listed commit's message). Non-interactive — never use git rebase -i for this.
• Squash: Stash any local changes first (git stash -u), then use mergify stack squash SRC... into TARGET [-m "msg"] to combine multiple commits into one, with an optional custom message. Non-interactive — never use git rebase -i for this.
• Reword: Stash any local changes first (git stash -u), then use mergify stack reword <SHA> -m "new message" to change a commit's message in place. Non-interactive when -m is given — never use git rebase -i for this.
• Drop: Stash any local changes first (git stash -u), then use mergify stack drop <SHA>... to remove commits from the stack. Non-interactive — never use git rebase -i for this.
• Commit titles: Follow Conventional Commits (e.g., feat:, fix:, docs:)
• PR title & body: mergify stack copies the commit message title to the PR title and the commit message body to the PR body — so write commit messages as if they were PR descriptions. Everything that should appear in the PR (ticket references, context, test plans) MUST go in the commit message.
• Ticket references: Include ticket/issue references (e.g., MRGFY-1234, Fixes #123) in the commit message body, not added separately to the PR.
• PR lifecycle is fully managed by mergify stack: NEVER edit PR titles, bodies, or labels with gh pr edit or the GitHub MCP — they will be overwritten on the next push. NEVER close or merge PRs manually — mergify stack handles the entire PR lifecycle (creation, updates, and cleanup).
• Draft PRs: NEVER mark a PR as ready-for-review — all PRs stay as drafts. The user will manually move them out of draft after reviewing.
• Each commit must pass CI independently: Every commit in a stack becomes its own PR. Each PR runs CI separately, so every commit must be self-contained — it must compile, pass linters, and pass tests on its own without depending on later commits in the stack. When formatting or linting fixes are needed, they must be included in the commit that introduced the issue, not deferred to a later commit.

Common Mistakes

Wrong	Right	Why
git push	mergify stack push	Git push bypasses stack management and breaks PR relationships
New commit to fix lint/typo	git commit --amend (HEAD) or git commit --fixup <SHA> + git rebase --autosquash (mid-stack)	Each commit = a PR; fix commits create unwanted extra PRs
gh pr edit --title "..."	Edit the commit message, then mergify stack push	PR title/body are overwritten from commit messages on every push
gh pr merge or gh pr close	PR lifecycle is fully managed — do nothing	PR lifecycle is fully managed by the stack tool
git commit on main	mergify stack new <name> first	mergify stack push will fail on the default branch
git rebase -i to fixup a commit	mergify stack fixup <SHA>	Non-interactive — works inside LLM/agent sessions; no editor spawned
git rebase -i to squash commits	mergify stack squash A B into X [-m "..."]	Non-interactive — works inside LLM/agent sessions; no editor spawned
git rebase -i to change a commit message	mergify stack reword <SHA> -m "..."	Non-interactive — works inside LLM/agent sessions; no editor spawned
git rebase -i to amend a mid-stack commit	mergify stack edit <SHA-or-Change-Id-prefix> then git commit --amend then git rebase --continue	Non-interactive — pauses the rebase at the target commit without spawning an editor
git rebase -i to drop a commit	mergify stack drop <SHA>...	Non-interactive — works inside LLM/agent sessions; no editor spawned
GIT_SEQUENCE_EDITOR='sed -i ...' git rebase -i (any variant)	One of mergify stack {edit,fixup,squash,reorder,move}	Hand-rolled sequence-editor scripts are brittle; there is already a non-interactive command for every common rewrite
Deferring lint fixes to a later commit	Include the fix in the commit that caused it	Each commit runs CI independently; later commits won't save earlier ones
Rebase/reorder/checkout/sync with dirty worktree	git stash -u first, then git stash pop after	Uncommitted changes are lost or cause conflicts during these operations
Amending a pushed commit with no explanation	mergify stack note -m "why" before mergify stack push	The reason is recorded in the PR's Revision history table and JSON marker, so reviewers don't need to diff to understand the change

Commands

mergify stack new NAME       # Create a new stack/branch for new work
mergify stack push           # Push and create/update PRs
mergify stack checkout NAME  # Checkout an existing stack from GitHub (e.g. someone else's)
mergify stack sync           # Fetch trunk, remove merged commits, rebase
mergify stack list           # Show commit <-> PR mapping for current stack
mergify stack list --json    # Same, but machine-readable JSON output
mergify stack reorder C A B  # Reorder all commits (pass SHA or Change-Id prefixes)
mergify stack move X first   # Move commit X to the top of the stack
mergify stack move X last    # Move commit X to the bottom of the stack
mergify stack move X before Y  # Move commit X before commit Y
mergify stack move X after Y   # Move commit X after commit Y
mergify stack fixup X              # Fold commit X into its parent (drops X's message)
mergify stack fixup X Y Z          # Fold each into its parent (multi-fixup)
mergify stack squash X into Y      # Reorder X adjacent to Y, fold X into Y (keeps Y's message)
mergify stack squash X Y into Z -m "msg"  # Fold X Y into Z with a custom message
mergify stack reword X -m "msg"    # Change commit X's message non-interactively
mergify stack reword X             # Change commit X's message via $GIT_EDITOR (TTY only)
mergify stack edit X               # Pause the rebase at X so you can `git commit --amend` it (X is required; no-arg form is interactive)
mergify stack drop X               # Drop commit X from the stack
mergify stack drop X Y Z           # Drop multiple commits in one rebase
mergify stack note -m "why"        # Attach an amend reason to HEAD (shown in PR revision history)
mergify stack note <SHA-or-Change-Id-prefix> -m "why"  # Attach to a specific commit in the stack
mergify stack note --append -m "more"                  # Append to an existing note
mergify stack note --remove                            # Remove the note from a commit

Use mergify stack checkout NAME to check out a stack that exists on GitHub (e.g. a colleague's stack). NAME is the remote branch name of the stack. It fetches all stacked PRs, creates a local branch, and sets up tracking. Use --branch to override the local branch name.

Use mergify stack sync to bring your stack up to date. It fetches the latest trunk, detects which PRs have been merged, removes those commits from your local branch, and rebases the remaining commits. Run this before starting new work on an existing stack.

Use mergify stack list to see which commits have been pushed, which PRs they map to, and whether the stack is up to date with the remote. It also shows CI status, review status, and merge conflicts for each PR. Use --verbose for detailed check names and reviewer names. Use --json when you need to parse the output programmatically — it includes full CI check details and review data.

Amend Notes

mergify stack note records why a commit was amended. The note travels with the stack:

• The reason is stored locally under refs/notes/mergify/stack against the commit SHA.
• On mergify stack push, the reason is consumed into the change's revision history; the note on the pushed head commit is replaced by the full revision history (human digest + the <!-- mergify-revision-data: {...} --> JSON marker). Git notes — not the PR comment — are the machine-readable source of truth; the PR's "Revision history" comment is rendered from them.
• At merge time, Mergify copies the head commit's history note onto the merge/squash commit, so git log --notes=mergify/stack on the base branch shows why each change was revised.

When to attach a note — any time you amend or rewrite a commit that already has a PR open (i.e. it has been pushed at least once). The note answers "why is this revision different?" so the reviewer doesn't have to diff old vs new SHAs to find out.

Workflow — attach the note BEFORE mergify stack push:

# Edit HEAD, then:
git commit --amend
mergify stack note -m "address review: rename foo() to bar()"
mergify stack push

# Or for a mid-stack commit (after the rebase that amended it):
mergify stack note <SHA-or-Change-Id-prefix> -m "fix lint reported in CI"
mergify stack push

A note is per-commit, not per-revision. Each amend (or other history rewrite) creates a new commit SHA, so you must run mergify stack note again for the new SHA — the previous note stays attached to the old SHA and won't carry over. Use --append only when the current target commit already has a note and you want to add another reason; use --remove to clear it. Notes on commits that haven't changed since the last push are preserved but won't add a new revision row.

CRITICAL: Check Branch Before ANY Commit

BEFORE staging or committing anything, always check the current branch and assess stack state:

git branch --show-current
mergify stack list

• If you're on main (or the repo's default branch): you MUST create a feature branch first
• NEVER commit directly on main — mergify stack push will fail
• This check must happen before git add, not after git commit

CRITICAL: Stash Local Changes Before Worktree-Modifying Operations

BEFORE running any operation that rewrites history or switches branches, check for uncommitted changes and stash them:

git status --short          # Check for uncommitted changes
git stash -u                # Stash tracked + untracked changes if any

Operations that require this check:

• mergify stack edit <commit> (mid-stack fixes)
• mergify stack reorder / mergify stack move
• mergify stack fixup
• mergify stack squash
• mergify stack reword
• mergify stack drop
• mergify stack checkout
• mergify stack sync
• mergify stack new (switches to new branch)
• git checkout <branch>

After the operation completes, restore the stashed changes:

git stash pop

If you skip this step, uncommitted work will be silently lost or cause rebase conflicts.

Starting New Work

When asked to start a new piece of work, create a new feature, or work on something unrelated to the current stack:

1. Check current branch: git branch --show-current
2. Create a new stack: mergify stack new <branch-name>
   • Use descriptive branch names following the pattern: type/short-description (e.g., feat/add-login, fix/memory-leak)
3. Make commits following conventional commits
4. Push: mergify stack push

Adding to Existing Stack

When continuing work on an existing feature branch:

1. Check current branch: git branch --show-current
   • If on the right branch: proceed with commits
   • If on main: switch to the feature branch first with git checkout <branch> or create a new stack

Conflict Resolution

When a rebase causes conflicts (during git rebase -i or mergify stack push):

1. Resolve conflicts in your editor
2. Stage resolved files with git add
3. Continue with git rebase --continue

To abort instead: git rebase --abort

After resolving, run mergify stack push to sync the updated stack.