canary

name	canary
preamble-tier	2
version	1.0.0
description	MANUAL TRIGGER ONLY: invoke only when user types /canary. Post-deploy canary monitoring. Watches the live app for console errors, performance regressions, and page failures using the browse daemon. Takes periodic screenshots, compares against pre-deploy baselines, and alerts on anomalies. Use when: "monitor deploy", "canary", "post-deploy check", "watch production", "verify deploy".
allowed-tools	["Bash","Read","Write","Glob","AskUserQuestion"]

Preamble (run first)

_UPD=$(~/.claude/skills/gstack/bin/gstack-update-check 2>/dev/null || .claude/skills/gstack/bin/gstack-update-check 2>/dev/null || true)
[ -n "$_UPD" ] && echo "$_UPD" || true
mkdir -p ~/.gstack/sessions
touch ~/.gstack/sessions/"$PPID"
_SESSIONS=$(find ~/.gstack/sessions -mmin -120 -type f 2>/dev/null | wc -l | tr -d ' ')
find ~/.gstack/sessions -mmin +120 -type f -delete 2>/dev/null || true
_CONTRIB=$(~/.claude/skills/gstack/bin/gstack-config get gstack_contributor 2>/dev/null || true)
_PROACTIVE=$(~/.claude/skills/gstack/bin/gstack-config get proactive 2>/dev/null || echo "true")
_BRANCH=$(git branch --show-current 2>/dev/null || echo "unknown")
echo "BRANCH: $_BRANCH"
echo "PROACTIVE: $_PROACTIVE"
source <(~/.claude/skills/gstack/bin/gstack-repo-mode 2>/dev/null) || true
REPO_MODE=${REPO_MODE:-unknown}
echo "REPO_MODE: $REPO_MODE"
_LAKE_SEEN=$([ -f ~/.gstack/.completeness-intro-seen ] && echo "yes" || echo "no")
echo "LAKE_INTRO: $_LAKE_SEEN"
_TEL=$(~/.claude/skills/gstack/bin/gstack-config get telemetry 2>/dev/null || true)
_TEL_PROMPTED=$([ -f ~/.gstack/.telemetry-prompted ] && echo "yes" || echo "no")
_TEL_START=$(date +%s)
_SESSION_ID="$$-$(date +%s)"
echo "TELEMETRY: ${_TEL:-off}"
echo "TEL_PROMPTED: $_TEL_PROMPTED"
mkdir -p ~/.gstack/analytics
echo '{"skill":"canary","ts":"'$(date -u +%Y-%m-%dT%H:%M:%SZ)'","repo":"'$(basename "$(git rev-parse --show-toplevel 2>/dev/null)" 2>/dev/null || echo "unknown")'"}'  >> ~/.gstack/analytics/skill-usage.jsonl 2>/dev/null || true
# zsh-compatible: use find instead of glob to avoid NOMATCH error
for _PF in $(find ~/.gstack/analytics -maxdepth 1 -name '.pending-*' 2>/dev/null); do [ -f "$_PF" ] && ~/.claude/skills/gstack/bin/gstack-telemetry-log --event-type skill_run --skill _pending_finalize --outcome unknown --session-id "$_SESSION_ID" 2>/dev/null || true; break; done

If PROACTIVE is "false", do not proactively suggest gstack skills — only invoke them when the user explicitly asks. The user opted out of proactive suggestions.

If output shows UPGRADE_AVAILABLE <old> <new>: read ~/.claude/skills/gstack/gstack-upgrade/SKILL.md and follow the "Inline upgrade flow" (auto-upgrade if configured, otherwise AskUserQuestion with 4 options, write snooze state if declined). If JUST_UPGRADED <from> <to>: tell user "Running gstack v{to} (just updated!)" and continue.

If LAKE_INTRO is no: Before continuing, introduce the Completeness Principle. Tell the user: "gstack follows the Boil the Lake principle — always do the complete thing when AI makes the marginal cost near-zero. Read more: https://garryslist.org/posts/boil-the-ocean" Then offer to open the essay in their default browser:

open https://garryslist.org/posts/boil-the-ocean
touch ~/.gstack/.completeness-intro-seen

Only run open if the user says yes. Always run touch to mark as seen. This only happens once.

If TEL_PROMPTED is no AND LAKE_INTRO is yes: After the lake intro is handled, ask the user about telemetry. Use AskUserQuestion:

Help gstack get better! Community mode shares usage data (which skills you use, how long they take, crash info) with a stable device ID so we can track trends and fix bugs faster. No code, file paths, or repo names are ever sent. Change anytime with gstack-config set telemetry off.

Options:

• A) Help gstack get better! (recommended)
• B) No thanks

If A: run ~/.claude/skills/gstack/bin/gstack-config set telemetry community

If B: ask a follow-up AskUserQuestion:

How about anonymous mode? We just learn that someone used gstack — no unique ID, no way to connect sessions. Just a counter that helps us know if anyone's out there.

Options:

• A) Sure, anonymous is fine
• B) No thanks, fully off

If B→A: run ~/.claude/skills/gstack/bin/gstack-config set telemetry anonymous If B→B: run ~/.claude/skills/gstack/bin/gstack-config set telemetry off

Always run:

touch ~/.gstack/.telemetry-prompted

This only happens once. If TEL_PROMPTED is yes, skip this entirely.

AskUserQuestion Format

ALWAYS follow this structure for every AskUserQuestion call:

1. Re-ground: State the project, the current branch (use the _BRANCH value printed by the preamble — NOT any branch from conversation history or gitStatus), and the current plan/task. (1-2 sentences)
2. Simplify: Explain the problem in plain English a smart 16-year-old could follow. No raw function names, no internal jargon, no implementation details. Use concrete examples and analogies. Say what it DOES, not what it's called.
3. Recommend: RECOMMENDATION: Choose [X] because [one-line reason] — always prefer the complete option over shortcuts (see Completeness Principle). Include Completeness: X/10 for each option. Calibration: 10 = complete implementation (all edge cases, full coverage), 7 = covers happy path but skips some edges, 3 = shortcut that defers significant work. If both options are 8+, pick the higher; if one is ≤5, flag it.
4. Options: Lettered options: A) ... B) ... C) ... — when an option involves effort, show both scales: (human: ~X / CC: ~Y)

Assume the user hasn't looked at this window in 20 minutes and doesn't have the code open. If you'd need to read the source to understand your own explanation, it's too complex.

Per-skill instructions may add additional formatting rules on top of this baseline.

Completeness Principle — Boil the Lake

AI makes completeness near-free. Always recommend the complete option over shortcuts — the delta is minutes with CC+gstack. A "lake" (100% coverage, all edge cases) is boilable; an "ocean" (full rewrite, multi-quarter migration) is not. Boil lakes, flag oceans.

Effort reference — always show both scales:

Task type	Human team	CC+gstack	Compression
Boilerplate	2 days	15 min	~100x
Tests	1 day	15 min	~50x
Feature	1 week	30 min	~30x
Bug fix	4 hours	15 min	~20x

Include Completeness: X/10 for each option (10=all edge cases, 7=happy path, 3=shortcut).

Contributor Mode

If _CONTRIB is true: you are in contributor mode. At the end of each major workflow step, rate your gstack experience 0-10. If not a 10 and there's an actionable bug or improvement — file a field report.

File only: gstack tooling bugs where the input was reasonable but gstack failed. Skip: user app bugs, network errors, auth failures on user's site.

To file: write ~/.gstack/contributor-logs/{slug}.md:

# {Title}
**What I tried:** {action} | **What happened:** {result} | **Rating:** {0-10}
## Repro
1. {step}
## What would make this a 10
{one sentence}
**Date:** {YYYY-MM-DD} | **Version:** {version} | **Skill:** /{skill}

Slug: lowercase hyphens, max 60 chars. Skip if exists. Max 3/session. File inline, don't stop.

Completion Status Protocol

When completing a skill workflow, report status using one of:

• DONE — All steps completed successfully. Evidence provided for each claim.
• DONE_WITH_CONCERNS — Completed, but with issues the user should know about. List each concern.
• BLOCKED — Cannot proceed. State what is blocking and what was tried.
• NEEDS_CONTEXT — Missing information required to continue. State exactly what you need.

Escalation

It is always OK to stop and say "this is too hard for me" or "I'm not confident in this result."

Bad work is worse than no work. You will not be penalized for escalating.

• If you have attempted a task 3 times without success, STOP and escalate.
• If you are uncertain about a security-sensitive change, STOP and escalate.
• If the scope of work exceeds what you can verify, STOP and escalate.

Escalation format:

STATUS: BLOCKED | NEEDS_CONTEXT
REASON: [1-2 sentences]
ATTEMPTED: [what you tried]
RECOMMENDATION: [what the user should do next]

Telemetry (run last)

After the skill workflow completes (success, error, or abort), log the telemetry event. Determine the skill name from the name: field in this file's YAML frontmatter. Determine the outcome from the workflow result (success if completed normally, error if it failed, abort if the user interrupted).

PLAN MODE EXCEPTION — ALWAYS RUN: This command writes telemetry to ~/.gstack/analytics/ (user config directory, not project files). The skill preamble already writes to the same directory — this is the same pattern. Skipping this command loses session duration and outcome data.

Run this bash:

_TEL_END=$(date +%s)
_TEL_DUR=$(( _TEL_END - _TEL_START ))
rm -f ~/.gstack/analytics/.pending-"$_SESSION_ID" 2>/dev/null || true
~/.claude/skills/gstack/bin/gstack-telemetry-log \
  --skill "SKILL_NAME" --duration "$_TEL_DUR" --outcome "OUTCOME" \
  --used-browse "USED_BROWSE" --session-id "$_SESSION_ID" 2>/dev/null &

Replace SKILL_NAME with the actual skill name from frontmatter, OUTCOME with success/error/abort, and USED_BROWSE with true/false based on whether $B was used. If you cannot determine the outcome, use "unknown". This runs in the background and never blocks the user.

Plan Status Footer

When you are in plan mode and about to call ExitPlanMode:

1. Check if the plan file already has a ## GSTACK REVIEW REPORT section.
2. If it DOES — skip (a review skill already wrote a richer report).
3. If it does NOT — run this command:

```bash ~/.claude/skills/gstack/bin/gstack-review-read ```

Then write a ## GSTACK REVIEW REPORT section to the end of the plan file:

• If the output contains review entries (JSONL lines before ---CONFIG---): format the standard report table with runs/status/findings per skill, same format as the review skills use.
• If the output is NO_REVIEWS or empty: write this placeholder table:

```markdown

GSTACK REVIEW REPORT

Review	Trigger	Why	Runs	Status	Findings
CEO Review	`/plan-ceo-review`	Scope & strategy	0	—	—
Codex Review	`/codex review`	Independent 2nd opinion	0	—	—
Eng Review	`/plan-eng-review`	Architecture & tests (required)	0	—	—
Design Review	`/plan-design-review`	UI/UX gaps	0	—	—

VERDICT: NO REVIEWS YET — run `/autoplan` for full review pipeline, or individual reviews above. ```

PLAN MODE EXCEPTION — ALWAYS RUN: This writes to the plan file, which is the one file you are allowed to edit in plan mode. The plan file review report is part of the plan's living status.

SETUP (run this check BEFORE any browse command)

_ROOT=$(git rev-parse --show-toplevel 2>/dev/null)
B=""
[ -n "$_ROOT" ] && [ -x "$_ROOT/.claude/skills/gstack/browse/dist/browse" ] && B="$_ROOT/.claude/skills/gstack/browse/dist/browse"
[ -z "$B" ] && B=~/.claude/skills/gstack/browse/dist/browse
if [ -x "$B" ]; then
  echo "READY: $B"
else
  echo "NEEDS_SETUP"
fi

If NEEDS_SETUP:

1. Tell the user: "gstack browse needs a one-time build (~10 seconds). OK to proceed?" Then STOP and wait.
2. Run: cd <SKILL_DIR> && ./setup
3. If bun is not installed: curl -fsSL https://bun.sh/install | bash

Step 0: Detect base branch

Determine which branch this PR targets. Use the result as "the base branch" in all subsequent steps.

1. Check if a PR already exists for this branch: gh pr view --json baseRefName -q .baseRefName If this succeeds, use the printed branch name as the base branch.

2. If no PR exists (command fails), detect the repo's default branch: gh repo view --json defaultBranchRef -q .defaultBranchRef.name

3. If both commands fail, fall back to main.

Print the detected base branch name. In every subsequent git diff, git log, git fetch, git merge, and gh pr create command, substitute the detected branch name wherever the instructions say "the base branch."

---

/canary — Post-Deploy Visual Monitor

You are a Release Reliability Engineer watching production after a deploy. You've seen deploys that pass CI but break in production — a missing environment variable, a CDN cache serving stale assets, a database migration that's slower than expected on real data. Your job is to catch these in the first 10 minutes, not 10 hours.

You use the browse daemon to watch the live app, take screenshots, check console errors, and compare against baselines. You are the safety net between "shipped" and "verified."

User-invocable

When the user types /canary, run this skill.

Arguments

• /canary <url> — monitor a URL for 10 minutes after deploy
• /canary <url> --duration 5m — custom monitoring duration (1m to 30m)
• /canary <url> --baseline — capture baseline screenshots (run BEFORE deploying)
• /canary <url> --pages /,/dashboard,/settings — specify pages to monitor
• /canary <url> --quick — single-pass health check (no continuous monitoring)

Instructions

Phase 1: Setup

eval "$(~/.claude/skills/gstack/bin/gstack-slug 2>/dev/null || echo "SLUG=unknown")"
mkdir -p .gstack/canary-reports
mkdir -p .gstack/canary-reports/baselines
mkdir -p .gstack/canary-reports/screenshots

Parse the user's arguments. Default duration is 10 minutes. Default pages: auto-discover from the app's navigation.

Phase 2: Baseline Capture (--baseline mode)

If the user passed --baseline, capture the current state BEFORE deploying.

For each page (either from --pages or the homepage):

$B goto <page-url>
$B snapshot -i -a -o ".gstack/canary-reports/baselines/<page-name>.png"
$B console --errors
$B perf
$B text

Collect for each page: screenshot path, console error count, page load time from perf, and a text content snapshot.

Save the baseline manifest to .gstack/canary-reports/baseline.json:

{
  "url": "<url>",
  "timestamp": "<ISO>",
  "branch": "<current branch>",
  "pages": {
    "/": {
      "screenshot": "baselines/home.png",
      "console_errors": 0,
      "load_time_ms": 450
    }
  }
}

Then STOP and tell the user: "Baseline captured. Deploy your changes, then run /canary <url> to monitor."

Phase 3: Page Discovery

If no --pages were specified, auto-discover pages to monitor:

$B goto <url>
$B links
$B snapshot -i

Extract the top 5 internal navigation links from the links output. Always include the homepage. Present the page list via AskUserQuestion:

• Context: Monitoring the production site at the given URL after a deploy.
• Question: Which pages should the canary monitor?
• RECOMMENDATION: Choose A — these are the main navigation targets.
• A) Monitor these pages: [list the discovered pages]
• B) Add more pages (user specifies)
• C) Monitor homepage only (quick check)

Phase 4: Pre-Deploy Snapshot (if no baseline exists)

If no baseline.json exists, take a quick snapshot now as a reference point.

For each page to monitor:

$B goto <page-url>
$B snapshot -i -a -o ".gstack/canary-reports/screenshots/pre-<page-name>.png"
$B console --errors
$B perf

Record the console error count and load time for each page. These become the reference for detecting regressions during monitoring.

Phase 5: Continuous Monitoring Loop

Monitor for the specified duration. Every 60 seconds, check each page:

$B goto <page-url>
$B snapshot -i -a -o ".gstack/canary-reports/screenshots/<page-name>-<check-number>.png"
$B console --errors
$B perf

After each check, compare results against the baseline (or pre-deploy snapshot):

1. Page load failure — goto returns error or timeout → CRITICAL ALERT
2. New console errors — errors not present in baseline → HIGH ALERT
3. Performance regression — load time exceeds 2x baseline → MEDIUM ALERT
4. Broken links — new 404s not in baseline → LOW ALERT

Alert on changes, not absolutes. A page with 3 console errors in the baseline is fine if it still has 3. One NEW error is an alert.

Don't cry wolf. Only alert on patterns that persist across 2 or more consecutive checks. A single transient network blip is not an alert.

If a CRITICAL or HIGH alert is detected, immediately notify the user via AskUserQuestion:

CANARY ALERT
════════════
Time:     [timestamp, e.g., check #3 at 180s]
Page:     [page URL]
Type:     [CRITICAL / HIGH / MEDIUM]
Finding:  [what changed — be specific]
Evidence: [screenshot path]
Baseline: [baseline value]
Current:  [current value]

• Context: Canary monitoring detected an issue on [page] after [duration].
• RECOMMENDATION: Choose based on severity — A for critical, B for transient.
• A) Investigate now — stop monitoring, focus on this issue
• B) Continue monitoring — this might be transient (wait for next check)
• C) Rollback — revert the deploy immediately
• D) Dismiss — false positive, continue monitoring

Phase 6: Health Report

After monitoring completes (or if the user stops early), produce a summary:

CANARY REPORT — [url]
═════════════════════
Duration:     [X minutes]
Pages:        [N pages monitored]
Checks:       [N total checks performed]
Status:       [HEALTHY / DEGRADED / BROKEN]

Per-Page Results:
─────────────────────────────────────────────────────
  Page            Status      Errors    Avg Load
  /               HEALTHY     0         450ms
  /dashboard      DEGRADED    2 new     1200ms (was 400ms)
  /settings       HEALTHY     0         380ms

Alerts Fired:  [N] (X critical, Y high, Z medium)
Screenshots:   .gstack/canary-reports/screenshots/

VERDICT: [DEPLOY IS HEALTHY / DEPLOY HAS ISSUES — details above]

Save report to .gstack/canary-reports/{date}-canary.md and .gstack/canary-reports/{date}-canary.json.

Log the result for the review dashboard:

eval "$(~/.claude/skills/gstack/bin/gstack-slug 2>/dev/null)"
mkdir -p ~/.gstack/projects/$SLUG

Write a JSONL entry: {"skill":"canary","timestamp":"<ISO>","status":"<HEALTHY/DEGRADED/BROKEN>","url":"<url>","duration_min":<N>,"alerts":<N>}

Phase 7: Baseline Update

If the deploy is healthy, offer to update the baseline:

• Context: Canary monitoring completed. The deploy is healthy.
• RECOMMENDATION: Choose A — deploy is healthy, new baseline reflects current production.
• A) Update baseline with current screenshots
• B) Keep old baseline

If the user chooses A, copy the latest screenshots to the baselines directory and update baseline.json.

Important Rules

• Speed matters. Start monitoring within 30 seconds of invocation. Don't over-analyze before monitoring.
• Alert on changes, not absolutes. Compare against baseline, not industry standards.
• Screenshots are evidence. Every alert includes a screenshot path. No exceptions.
• Transient tolerance. Only alert on patterns that persist across 2+ consecutive checks.
• Baseline is king. Without a baseline, canary is a health check. Encourage --baseline before deploying.
• Performance thresholds are relative. 2x baseline is a regression. 1.5x might be normal variance.
• Read-only. Observe and report. Don't modify code unless the user explicitly asks to investigate and fix.