Ejecuta cualquier Skill en Manus
con un clic

Ejecuta cualquier Skill en Manus con un clic

run-tests

Estrellas40

Forks5

Actualizado24 de mayo de 2026 a las 13:16

Provides guidelines for running Unity tests using the run_unity_tests tool. Make sure to use this skill whenever running, executing, or re-running tests on the Unity editor. This includes verifying implementations, debugging test failures, running specific test assemblies, or any task that involves the run_unity_tests tool. Even if the user just says "run the tests" or "check if it passes", use this skill.

Instalación

Instalar con Codex o Claude Copia este prompt, pégalo en Codex, Claude u otro asistente, y deja que revise la página de la skill y la instale por ti.

Ejecutar en Manus

Fuente

nowsprinting

nowsprinting/claude-code-settings-for-unity

Abrir repositorio de GitHub Ver repositorios del creador

Descarga

Ejecutar en Manus

Ocupaciones relacionadasSOC

Basado en la clasificación ocupacional SOC

Desarrolladores de softwareOcupaciones informáticas y matemáticas·SOC 15-1252

Explorador de archivos

5 archivos

SKILL.md

readonly

name	run-tests
description	Provides guidelines for running Unity tests using the run_unity_tests tool. Make sure to use this skill whenever running, executing, or re-running tests on the Unity editor. This includes verifying implementations, debugging test failures, running specific test assemblies, or any task that involves the run_unity_tests tool. Even if the user just says "run the tests" or "check if it passes", use this skill.
license	Unlicense
metadata	{"author":"Koji Hasegawa"}

Gotchas

Never call two Unity Editor tools in parallel. unity_play_control, get_unity_compilation_result, run_unity_tests, and run_method_in_unity must be called strictly one at a time — always wait for each call to return before making the next one. Calling them concurrently causes domain-reload conflicts that result in "canceled" or "did not connect within 30 seconds" errors.
When a Unity Editor tool returns error or canceled, wait 10 seconds before retrying. Domain reload typically takes several seconds; immediate retry hits the same in-flight reload and fails again. Do not switch tools in the meantime (e.g., calling unity_play_control to verify state) — that just compounds the multiplexed calls. If the same tool returns error or canceled on two consecutive attempts (with the 10-second wait between them), stop and consult the user instead of retrying further.

Run Tests

Before running tests, complete the following steps in order:

If any code was modified, confirm compilation success using the get_unity_compilation_result tool before proceeding.
To determine assemblyNames and testMode for a specific test class, run ${CLAUDE_SKILL_DIR}/scripts/resolve-test-target.sh <test-class-cs-path>. The script prints <assemblyName>\t<testMode> (e.g. MyGame.Tests\tPlayMode). Skip this step when running an already-known assembly.

Then use the run_unity_tests tool to run the tests on the Unity editor.

Test execution can take several minutes. Do not re-run while a test is in progress — always wait for it to complete or time out. If a timeout occurs, narrow down the tests using filter settings and re-run.

Rules for Test Failures

If the same test(s) fail on two or more consecutive runs, stop and consult the user rather than continuing to fix.

When consulting, clarify:

Current failure status: what is failing and the likely cause
Fix history: what was changed, how many times, and the scope of impact
Planned approach: what options are being considered next

Troubleshooting

Read the appropriate resource file based on the situation:

Any Unity MCP tool (run_unity_tests, unity_play_control, get_unity_compilation_result) is not available or fails with a connection error: Read ${CLAUDE_SKILL_DIR}/resources/troubleshooting-run-unity-tests.md
A test fails due to an assertion, constraint, or comparer in the TestHelper namespace (excluding TestHelper.UI): Read ${CLAUDE_SKILL_DIR}/resources/troubleshooting-test-helper.md
A test fails due to an exception thrown from the TestHelper.UI namespace: Read ${CLAUDE_SKILL_DIR}/resources/troubleshooting-test-helper-ui.md

Más de este repositorio

mismo repositorio

fix-bug

nowsprinting/claude-code-settings-for-unity

Diagnoses and fixes bugs using a test-first workflow (reproduce, diagnose, fix). Use this skill whenever the user reports a bug, describes unexpected behavior, or asks to investigate or fix a defect. Even if the user says "something's broken", "this isn't working", "fix this bug", or "why does X happen", load this skill to guide the full reproduce → diagnose → fix cycle.

2026-05-2640

plan-feature

nowsprinting/claude-code-settings-for-unity

Orchestrates the test-first implementation planning workflow for feature implementation and spec changes. Use this skill whenever plan mode is active and the task involves implementing or adding a new feature, or changing an existing specification. Even if the user only says "plan this" or "how should we implement this", load this skill to ensure the full test-first planning workflow is followed.

2026-05-2640

test-designing-guide

nowsprinting/claude-code-settings-for-unity

Provides test design methodology for Unity projects. Use this skill whenever designing test cases from requirements or specifications, including selecting test techniques, deriving test cases, and formatting them. Even for small features, load this skill to ensure test design rigor.

2026-05-2640

code-writing-guide

nowsprinting/claude-code-settings-for-unity

Provides coding guidelines for Unity projects. Make sure to use this skill whenever writing, creating, editing, or modifying code files. This includes implementing new features, fixing bugs, refactoring, adding tests, or any task that results in code changes. Even for small edits or one-line fixes, load this skill to ensure project conventions are followed.

2026-05-2540

test-writing-guide

nowsprinting/claude-code-settings-for-unity

Provides guidelines for writing test code for Unity projects. Make sure to use this skill whenever writing, creating, editing, or modifying test code files (files under Tests/). This includes implementing new tests, fixing test failures, adding test cases, or any task that results in test code changes. Even for small edits or one-line fixes, load this skill to ensure test conventions are followed.

2026-05-2540

edit-scene

nowsprinting/claude-code-settings-for-unity

Creates and modifies Unity scene and prefab files. Use this skill whenever creating, editing, or modifying .unity scene files or .prefab prefab files, or writing editor scripts under Assets/Editor/ that generate or manipulate scenes, prefabs, or scene-bound assets. This includes adding GameObjects, building uGUI hierarchies, wiring up components, and any task that results in changes to .unity or .prefab files.

2026-05-2440

name	run-tests
description	Provides guidelines for running Unity tests using the run_unity_tests tool. Make sure to use this skill whenever running, executing, or re-running tests on the Unity editor. This includes verifying implementations, debugging test failures, running specific test assemblies, or any task that involves the run_unity_tests tool. Even if the user just says "run the tests" or "check if it passes", use this skill.
license	Unlicense
metadata	{"author":"Koji Hasegawa"}

Gotchas

Never call two Unity Editor tools in parallel. unity_play_control, get_unity_compilation_result, run_unity_tests, and run_method_in_unity must be called strictly one at a time — always wait for each call to return before making the next one. Calling them concurrently causes domain-reload conflicts that result in "canceled" or "did not connect within 30 seconds" errors.
When a Unity Editor tool returns error or canceled, wait 10 seconds before retrying. Domain reload typically takes several seconds; immediate retry hits the same in-flight reload and fails again. Do not switch tools in the meantime (e.g., calling unity_play_control to verify state) — that just compounds the multiplexed calls. If the same tool returns error or canceled on two consecutive attempts (with the 10-second wait between them), stop and consult the user instead of retrying further.

Run Tests

Before running tests, complete the following steps in order:

If any code was modified, confirm compilation success using the get_unity_compilation_result tool before proceeding.
To determine assemblyNames and testMode for a specific test class, run ${CLAUDE_SKILL_DIR}/scripts/resolve-test-target.sh <test-class-cs-path>. The script prints <assemblyName>\t<testMode> (e.g. MyGame.Tests\tPlayMode). Skip this step when running an already-known assembly.

Then use the run_unity_tests tool to run the tests on the Unity editor.

Rules for Test Failures

If the same test(s) fail on two or more consecutive runs, stop and consult the user rather than continuing to fix.

When consulting, clarify:

Current failure status: what is failing and the likely cause
Fix history: what was changed, how many times, and the scope of impact
Planned approach: what options are being considered next

Troubleshooting

Read the appropriate resource file based on the situation:

Any Unity MCP tool (run_unity_tests, unity_play_control, get_unity_compilation_result) is not available or fails with a connection error: Read ${CLAUDE_SKILL_DIR}/resources/troubleshooting-run-unity-tests.md
A test fails due to an assertion, constraint, or comparer in the TestHelper namespace (excluding TestHelper.UI): Read ${CLAUDE_SKILL_DIR}/resources/troubleshooting-test-helper.md
A test fails due to an exception thrown from the TestHelper.UI namespace: Read ${CLAUDE_SKILL_DIR}/resources/troubleshooting-test-helper-ui.md