bgp-fault-skill

name	bgp-fault-skill
description	Identify BGP routing faults — ASN misconfiguration, missing route advertisement, prefix hijacking, blackhole route leak. Use when reachability failures follow BGP-routed paths, BGP sessions fail to establish, or expected prefixes are missing from peers.

BGP Faults

What These Faults Mean

• bgp_asn_misconfig: the router's local ASN does not match what its peers expect, so BGP sessions fail to establish.
• bgp_missing_route_advertisement: a network statement for a locally-attached prefix is missing from the router's router bgp block, so peers never learn that prefix.
• bgp_hijacking: a router loopback claims a service IP/prefix that belongs elsewhere, and BGP advertises it, so traffic is pulled to the wrong router.
• bgp_blackhole_route_leak: a static route to Null0 is configured inside FRR and advertised into BGP via a matching network statement, attracting traffic that is then dropped.
• host_static_blackhole: a kernel-level blackhole route (ip route ... blackhole) is installed on a router for a directly-attached host subnet. There is no ip route ... Null0 line in the FRR running-config; the prefix is the host's own subnet, which BGP already advertises as part of normal baseline config.

Required tool usage

• FRR MCP tools use router_name, not host_name.
• If unsure of the FRR schema, fall back to exec_shell(host_name="<router>", command="vtysh -c '...'").
• frr_show_running_config and frr_show_ip_route can look clean when the daemon is dead; they are secondary evidence.

Guardrails

• A route being "missing or surprising" is not enough. You need direct config or routing-table evidence on the offending router.
• bgp_hijacking requires both the loopback IP AND the advertising network statement — one alone is not a hijack.
• bgp_blackhole_route_leak requires both an FRR-config ip route <P> Null0 line and a matching network <P> advertisement under router bgp. A pre-existing network for a router's normal attached subnet is not enough on its own.
• host_static_blackhole requires a kernel-level blackhole route on the router for an attached host subnet, with no corresponding ip route ... Null0 line in the FRR running-config. If you see a kernel blackhole and immediately conclude bgp_blackhole_route_leak because the prefix also appears as a network statement, you have misclassified — the network statement is normal baseline config; the leak label requires the explicit FRR-config Null0 line.