routeros-qemu-chr

name

routeros-qemu-chr

description

MikroTik RouterOS CHR (Cloud Hosted Router) with QEMU. Use when: running RouterOS in QEMU, booting CHR images, debugging CHR boot failures, setting up VirtIO devices for RouterOS, choosing between SeaBIOS and UEFI boot, configuring QEMU port forwarding for RouterOS REST API, setting up inter-VM socket networking or host-side L2 capture of guest broadcasts (e.g. MNDP), or selecting QEMU acceleration (KVM/HVF/TCG).

RouterOS CHR with QEMU

What Is CHR

Cloud Hosted Router (CHR) is MikroTik's x86_64 and aarch64 RouterOS image designed for virtual machines. Free license allows unlimited use with 1 Mbps speed limit — sufficient for development, testing, API work, and packet sniffer debugging. A free 60-day trial removes the speed limit entirely (requires a free mikrotik.com account). See CHR licensing reference for full details on license tiers, trial activation, and expiry behavior.

Image Variants

Image	Architecture	Boot method	Source
chr-<ver>.img	x86_64	SeaBIOS (MBR chain-load)	download.mikrotik.com
chr-<ver>-arm64.img	aarch64	UEFI (EDK2 pflash)	download.mikrotik.com
chr-efi.img (fat-chr)	x86_64	UEFI (OVMF)	tikoci/fat-chr GitHub

Standard x86 image has a proprietary boot partition — it looks like an EFI System Partition in GPT but is NOT FAT. UEFI firmware (OVMF) cannot read it. Only SeaBIOS can boot it via MBR chain-load.

The fat-chr repackaged image converts this to standard FAT16 with EFI/BOOT/BOOTX64.EFI, enabling UEFI boot. Required for Apple Virtualization.framework on X86 macOS, optional everywhere else.

Disk layout (128 MiB, both architectures): Hybrid GPT+MBR, partition 1 = boot (~33 MiB), partition 2 = ext4 root (~94 MiB).

Downloading CHR Images

// Resolve current version
const channel = "stable"; // or: long-term, testing, development
const version = await fetch(
  `https://upgrade.mikrotik.com/routeros/NEWESTa7.${channel}`
).then(r => r.text()).then(s => s.trim());

// Download x86_64 image
const url = `https://download.mikrotik.com/routeros/${version}/chr-${version}.img.zip`;
// Download aarch64 image
const armUrl = `https://download.mikrotik.com/routeros/${version}/chr-${version}-arm64.img.zip`;

Images are distributed as .img.zip — unzip to get the raw .img disk file.

Pattern Choices: QEMU Invocation

There are several valid approaches to launching CHR under QEMU. Each has tradeoffs:

Pattern A: Inline arguments (simplest, good for scripts)

Everything on the command line. Easy for an LLM to construct and debug — all state is visible in one place.

qemu-system-x86_64 -M q35 -m 256 -smp 1 \
  -drive file=chr.img,format=raw,if=virtio \
  -netdev user,id=net0,hostfwd=tcp::9180-:80 \
  -device virtio-net-pci,netdev=net0 \
  -display none -serial stdio

Pros: Single command, easy to read, easy to modify. Cons: Long command lines, hard to version-control, no persistence.

Pattern B: Wrapper script (good for reuse)

A shell script that detects acceleration, handles firmware paths, manages PID files.

#!/bin/sh
# detect acceleration
if [ "$(uname -s)" = "Linux" ] && [ -w /dev/kvm ]; then
  ACCEL="-accel kvm"
elif [ "$(uname -s)" = "Darwin" ] && [ "$(sysctl -n kern.hv_support 2>/dev/null)" = "1" ]; then
  ACCEL="-accel hvf"
else
  ACCEL="-accel tcg"
fi

qemu-system-x86_64 -M q35 -m 256 -smp 1 \
  $ACCEL \
  -drive file=chr.img,format=raw,if=virtio \
  -netdev user,id=net0,hostfwd=tcp::${PORT:-9180}-:80 \
  -device virtio-net-pci,netdev=net0 \
  -display none -serial stdio

Pros: Portable, handles platform differences, parameterizable. Cons: Shell scripting limitations, harder to compose from TypeScript.

Pattern C: Programmatic launch from Bun/TypeScript (good for integration tests)

Launch QEMU as a child process with full control:

import { $ } from "bun";

const port = 9180;
const accel = await detectAccel();
const proc = Bun.spawn([
  "qemu-system-x86_64", "-M", "q35", "-m", "256",
  "-accel", accel,
  "-drive", `file=chr.img,format=raw,if=virtio`,
  "-netdev", `user,id=net0,hostfwd=tcp::${port}-:80`,
  "-device", "virtio-net-pci,netdev=net0",
  "-display", "none",
  "-chardev", `socket,id=serial0,path=/tmp/chr-serial.sock,server=on,wait=off`,
  "-serial", "chardev:serial0",
  "-monitor", `unix:/tmp/chr-monitor.sock,server,nowait`,
], { stdio: ["ignore", "pipe", "pipe"] });

// Wait for boot
await waitForBoot(`http://127.0.0.1:${port}/`);

Pros: Full lifecycle control, parallel instance management, TypeScript-native. Cons: More code, QEMU args still need to be correct.

Pattern D: Config file (--readconfig) (declarative, used by mikropkl)

QEMU's --readconfig loads an INI-format file for device/machine config. The mikropkl project uses this for its declarative VM packaging.

Tradeoffs: Separates concerns (config vs launch), but the INI format is obscure and not all QEMU options can be expressed in it (pflash, -accel, -netdev user,hostfwd all require command-line args). Best suited for projects that generate configs programmatically.

Boot Tracks

x86_64 with SeaBIOS (default, fastest)

No firmware setup needed — QEMU's built-in SeaBIOS handles MikroTik's proprietary boot sector:

qemu-system-x86_64 -M q35 -m 256 \
  -drive file=chr-7.22.img,format=raw,if=virtio \
  -netdev user,id=net0,hostfwd=tcp::9180-:80 \
  -device virtio-net-pci,netdev=net0 \
  -display none -serial stdio

-M pc (i440fx, legacy PCI) also works for CHR. CHR doesn't exercise most of what q35 adds (modern PCIe topology, ACPI-based hotplug, etc.) because the RouterOS kernel bypasses the BIOS/ACPI stack after boot — the VirtIO PCI devices are what it actually uses, and both machine types expose those identically. For the kernel-config evidence behind this, see tikoci/mikrotik-gpl (v7.2 kernel config archive).

Boot time: ~5s (KVM), ~30s (TCG). For TCG, -accel tcg,tb-size=256 enlarges the translation block cache and reduces boot time noticeably on repeated runs.

aarch64 with UEFI (EDK2)

Requires UEFI pflash firmware files. Both pflash units must be identical size (typically 64 MiB):

# Copy vars file (writable) — never modify the original
cp /path/to/edk2-arm-vars.fd /tmp/my-vars.fd

qemu-system-aarch64 -M virt -cpu cortex-a710 -m 256 \
  -drive if=pflash,format=raw,readonly=on,unit=0,file=/path/to/edk2-aarch64-code.fd \
  -drive if=pflash,format=raw,unit=1,file=/tmp/my-vars.fd \
  -drive file=chr-arm64.img,format=raw,if=none,id=drive0 \
  -device virtio-blk-pci,drive=drive0 \
  -netdev user,id=net0,hostfwd=tcp::9180-:80 \
  -device virtio-net-pci,netdev=net0 \
  -display none -serial stdio

Boot time: ~10s (KVM), ~20s (TCG native), ~20s (TCG cross-arch on x86 host).

UEFI Firmware Locations

Platform	Code ROM	Vars File
macOS Homebrew (Apple Silicon)	/opt/homebrew/share/qemu/edk2-aarch64-code.fd	edk2-arm-vars.fd
macOS Homebrew (Intel)	/usr/local/share/qemu/edk2-aarch64-code.fd	edk2-arm-vars.fd
Ubuntu/Debian	/usr/share/AAVMF/AAVMF_CODE.fd	AAVMF_VARS.fd
x86 OVMF (Homebrew)	edk2-x86_64-code.fd	edk2-i386-vars.fd
x86 OVMF (Linux)	/usr/share/OVMF/OVMF_CODE.fd	OVMF_VARS.fd

VirtIO — Critical Details

See the VirtIO driver matrix for the full table.

The one rule: RouterOS has virtio_pci but NOT virtio_mmio. This matters on aarch64.

The if=virtio Trap (aarch64)

                         x86_64 (q35)              aarch64 (virt)
if=virtio shorthand →    virtio-blk-pci (PCI) ✅    virtio-blk-device (MMIO) ❌
-device virtio-blk-pci → virtio-blk-pci (PCI) ✅    virtio-blk-pci (PCI) ✅

On x86_64 q35, if=virtio resolves to PCI — works fine. On aarch64 virt, it resolves to MMIO — RouterOS kernel stalls silently. Always use explicit -device virtio-blk-pci on aarch64:

# WRONG on aarch64 — silent boot failure
-drive file=chr.img,format=raw,if=virtio

# CORRECT on aarch64 — explicit PCI device
-drive file=chr.img,format=raw,if=none,id=drive0
-device virtio-blk-pci,drive=drive0

On x86_64, both work. The explicit form is always safe on both architectures.

Network — Universal

All architectures: virtio-net-pci. No exceptions:

-netdev user,id=net0,hostfwd=tcp::9180-:80
-device virtio-net-pci,netdev=net0

user (SLIRP) is a userspace NAT — ideal for management (hostfwd of REST/SSH/WinBox), but it terminates Layer 2: broadcasts and non-forwarded UDP never reach the host or other VMs. For anything L2 (inter-VM links, neighbor discovery, MAC-Telnet) add a second NIC on a socket netdev.

L2 Networking: socket netdevs (inter-VM links + host capture)

QEMU's socket netdev carries raw Ethernet frames over a host socket — rootless, no extra setup:

# TCP, point-to-point — one side listens, the other connects
-netdev socket,id=net1,listen=:4001            # VM A (start first)
-netdev socket,id=net1,connect=127.0.0.1:4001  # VM B
# UDP multicast — shared L2 segment for N VMs
-netdev socket,id=net1,mcast=230.0.0.1:4001

⚠ mcast is broken on macOS. QEMU's mcast socket sets only SO_REUSEADDR, but macOS/BSD require SO_REUSEPORT on every socket sharing a multicast port — so on macOS nothing is delivered between local sockets: two VMs on the same group don't discover each other, and a host listener gets zero frames. It works on Linux (and CI). For point-to-point on macOS use TCP listen/connect; there is no rootless multi-VM L2 segment on macOS today (use socket_vmnet, privileged-once, for that).

Host capture of guest L2 frames (e.g. MNDP)

To let a host process receive a guest's broadcasts — MNDP neighbor discovery (the protocol WinBox's "Neighbors" tab uses, UDP/5678) being the first case — make the host one end of a TCP socket netdev:

1. Host runs a TCP server on a loopback port.
2. CHR gets a second NIC: -netdev socket,id=net1,connect=127.0.0.1:<port> — the host must be listening before QEMU starts, since QEMU is the connecting side.
3. QEMU streams every guest frame to the host, length-prefixed: a 4-byte big-endian length, then the raw Ethernet frame.
4. Host strips the prefix and parses Ethernet → IPv4 → UDP/5678 → MNDP TLVs.

Writing a length-prefixed frame back over the same connection injects L2 into the guest (e.g. an MNDP refresh to trigger an immediate reply — the same primitive MAC-Telnet needs). Loopback-only, so nothing leaks onto the LAN; works on macOS, Linux, and Windows alike.

Reference implementation + verified evidence: tikoci/quickchr (examples/mndp/, docs/mndp.md, test/lab/mndp/REPORT.md). For the MNDP wire format and TLV table, see the routeros-mndp skill.

Acceleration Detection

import { $ } from "bun";

async function detectAccel(guestArch: string): Promise<string> {
  const hostOs = process.platform;  // "darwin" | "linux"
  const hostArch = process.arch;    // "x64" | "arm64"

  if (hostOs === "linux") {
    // KVM requires host/guest architecture match
    const kvm = await Bun.file("/dev/kvm").exists();
    const archMatch = (guestArch === "x86_64" && hostArch === "x64")
      || (guestArch === "aarch64" && hostArch === "arm64");
    if (kvm && archMatch) return "kvm";
  }

  if (hostOs === "darwin") {
    // HVF may not be available (e.g., GitHub Actions VMs)
    const hvOk = await $`sysctl -n kern.hv_support`.text().then(s => s.trim() === "1").catch(() => false);
    const archMatch = (guestArch === "aarch64" && hostArch === "arm64")
      || (guestArch === "x86_64" && hostArch === "x64");
    if (hvOk && archMatch) return "hvf";
  }

  return "tcg";  // Software emulation — always available
}

Key rule: KVM and HVF both require host/guest architecture match. Cross-arch always falls back to TCG. Don't check just for /dev/kvm — verify the architecture matches too.

HVF + CPU Model Gotcha (macOS)

With -accel hvf, QEMU exposes the host CPU directly. Specifying a CPU model like cortex-a710 (ARMv9, requires SVE2) on Apple Silicon (ARMv8.5) crashes QEMU before the VM starts. Use -cpu host with HVF:

# TCG/KVM — specify exact model
CPU_FLAGS="-cpu cortex-a710"

# HVF — passthrough host CPU
if [ "$ACCEL" = "hvf" ]; then
  CPU_FLAGS="-cpu host"
fi

Health Check and Boot Wait

RouterOS WebFig responds with HTTP 200 on port 80 without authentication — this works as a minimal health check:

async function waitForBoot(url: string, timeoutMs = 60_000): Promise<boolean> {
  const deadline = Date.now() + timeoutMs;
  while (Date.now() < deadline) {
    try {
      const r = await fetch(url, { signal: AbortSignal.timeout(2000) });
      if (r.ok) return true;
    } catch { /* not ready yet */ }
    await Bun.sleep(2000);
  }
  return false;
}

Startup race — pitfall if you then call the REST API immediately

RouterOS boot is staged from the client's perspective:

1. Connection refused — QEMU still booting
2. ECONNRESET — HTTP server up but REST subsystem not accepting
3. 401 from /rest/* — auth middleware up; REST handler may still be initializing
4. 200 but wrong body — REST initialized before routing tables settled; /system/resource can briefly return an array (e.g., a /user list) before it returns the expected singleton object
5. 200 with correct body — fully operational

A health check on the root / reaches stage 2 but gives no signal about 3–5. For code that will immediately call the REST API, probe /rest/system/resource with auth and require two consecutive successful probes with the expected body shape (singleton object containing board-name). On auth-only checks (unprovisioned admin), accept 401/403 as "REST layer responded." The / + HTTP 200 check is fine for "is it up?" monitoring but not for "can I start calling REST now?"

Port Forwarding

QEMU user-mode networking (-netdev user,hostfwd=...) for typical RouterOS services:

Service	Guest Port	Example Host Port	hostfwd
WebFig/REST API	80	9180	tcp::9180-:80
SSH (RouterOS CLI)	22	9122	tcp::9122-:22
API protocol	8728	9728	tcp::9728-:8728
API-SSL	8729	9729	tcp::9729-:8729
WinBox	8291	9291	tcp::9291-:8291

Multiple forwards in one netdev:

-netdev user,id=net0,hostfwd=tcp::9180-:80,hostfwd=tcp::9122-:22,hostfwd=tcp::9728-:8728

Use unique host ports per instance when running multiple CHRs (9180, 9181, 9182...).

Known Limitations

• QGA (Guest Agent) requires KVM — RouterOS CHR's QGA daemon only starts when it detects a KVM hypervisor via CPUID. Under HVF (macOS) or TCG (software emulation), CPUID 0x40000000 returns no KVM vendor string and 0x40000001 returns no KVM features, so the daemon never starts. QEMU correctly provides the virtio-serial port and sends PORT_OPEN (event 6) — the guest simply never opens it (query-chardev shows frontend-open=false). This is NOT a QEMU bug. MikroTik documents QGA exclusively under the "KVM" section. QGA testing requires Linux + KVM (e.g., mikropkl lab).
• check-installation fails on aarch64 in all QEMU environments — this is an unresolvable firmware/DTB issue (see known issues)
• Direct -kernel boot does not work for either architecture — RouterOS needs its full firmware boot path
• Cross-arch TCG: x86_64 on aarch64 host is not viable — x86 I/O port emulation is too slow (~300s+ timeouts). The reverse (aarch64 on x86_64) works fine (~20s)
• No virtio_mmio driver — always use explicit -device virtio-blk-pci, never rely on if=virtio on aarch64
• socket,mcast= inter-VM networking is broken on macOS — QEMU sets only SO_REUSEADDR; macOS/BSD need SO_REUSEPORT to share a multicast port, so no frames are delivered between local sockets (VMs don't discover each other; host capture gets nothing). Use TCP socket (listen/connect) for point-to-point, or socket_vmnet for a shared segment. Works on Linux/CI. Verified in tikoci/quickchr (test/lab/mndp/REPORT.md)

Additional Resources

• VirtIO driver matrix — full driver support table
• Known issues — boot failures, cross-arch limitations
• GitHub Actions CI patterns — running CHR on GitHub-hosted runners
• CHR licensing — free tier (1 Mbps), 60-day trial, paid tiers, expiry behavior
• For the quickchr reference implementation — driving CHR from tests & automation (QuickCHR.start, exec/rest, networking recipes, the connection surface for harnesses): see the routeros-quickchr skill
• For RouterOS CLI/REST once booted: see the routeros-fundamentals skill
• For packet capture and TZSP streaming from CHR: see the routeros-sniffer skill
• For MNDP neighbor-discovery wire format / TLVs (received via the host-capture recipe above): see the routeros-mndp skill
• For /app YAML container format (requires CHR with container package): see the routeros-app-yaml skill