masterplan-design

name	masterplan-design
description	Generate complete urban masterplans with spatial structure, land use distribution, street network, block layout, density strategy, phasing plan, and implementation framework. Use when the user asks to design a masterplan, create an urban layout, develop a neighborhood plan, design a district, plan a new community, lay out a development, structure an urban area, or create a site plan at the urban scale. Also use when the user provides a site and asks for a development proposal, a design concept, or a spatial framework. Handles greenfield, brownfield, and infill development scenarios.
disable-model-invocation	true

Masterplan Design Skill

Generate complete urban masterplans from site understanding through spatial structure, land use distribution, street network, block layout, density strategy, phasing plan, and implementation framework. This skill orchestrates multiple specialized sub-skills into a coherent design process that produces a fully resolved masterplan at any scale from a single city block to an entire new district or town extension.

---

1. Masterplan Design Process

The masterplan design process follows eight sequential phases. Each phase builds upon the outputs of the previous phase. Do not skip phases; mark any phase "Deferred" with justification if the user has not provided sufficient input. Cross-skill invocations are indicated with the --> symbol.

Phase Checklist

Phase 1: Site Understanding
  [ ] Site analysis complete or provided by user
  [ ] Constraints and opportunities mapped
  [ ] Key connections to surrounding context identified
  --> invoke site-analysis if not already done

Phase 2: Vision and Program Definition
  [ ] Design vision statement drafted (1 paragraph)
  [ ] Target population and household count established
  [ ] Total GFA by use type calculated
  [ ] Character precedents identified (3-5 reference projects)
  [ ] Sustainability and resilience targets set
  --> invoke precedent-study if user requests comparable projects

Phase 3: Structuring Framework
  [ ] Movement framework established (primary routes, transit spine)
  [ ] Green-blue framework established (parks, corridors, water)
  [ ] Built form framework established (centers, edges, density gradient)
  [ ] Transect zones defined and mapped (T1-T6 as applicable)
  [ ] Framework tested against site constraints

Phase 4: Street Network Design
  [ ] Street hierarchy defined (arterial, collector, local, shared)
  [ ] Cross-sections assigned to each street type
  [ ] Key intersections and public transport stops located
  [ ] Block structure generated from street network
  --> invoke street-design for hierarchy and cross-sections

Phase 5: Block and Parcel Layout
  [ ] Block typologies selected for each Transect zone
  [ ] Block dimensions and perimeters verified against standards
  [ ] Parcel subdivision logic applied
  [ ] Building footprint envelopes tested for feasibility
  --> invoke block-and-density for typology selection and optimization

Phase 6: Land Use and Program Distribution
  [ ] Land use zones assigned to each block or parcel
  [ ] Use mix percentages verified against vision targets
  [ ] Anchor uses located (schools, community centers, retail cores)
  [ ] Ground-floor activation strategy defined for key streets
  --> invoke mixed-use-programming for use mix and allocation

Phase 7: Public Space Network
  [ ] Neighborhood park(s) sized and located (within 500 m of all residents)
  [ ] Central plaza or civic space defined
  [ ] Pocket parks and play spaces distributed
  [ ] Greenways and pedestrian corridors connected
  [ ] Public space typology and character described
  --> invoke public-space-design for parks, plazas, civic spaces

Phase 8: Phasing and Implementation Strategy
  [ ] Development phased into 3-5 stages
  [ ] Infrastructure sequencing plan completed
  [ ] Catalyst projects identified for Phase 1
  [ ] Interim use strategy for undeveloped parcels defined
  [ ] Governance and delivery mechanism outlined

---

2. Structuring Framework Methodology

The structuring framework is the spatial DNA of the masterplan. It establishes the primary organizing systems before any building is placed. Three overlapping frameworks -- movement, green-blue, and built form -- are developed in parallel and then overlaid to create the composite spatial structure.

Movement Framework

Establish the hierarchy of movement from regional connections down to the individual street.

1. Regional connections: identify all points where the site connects to the surrounding road network, transit system, and cycling/pedestrian paths. These are the fixed anchors of the movement framework.
2. Primary routes: draw the main streets that connect the anchor points across the site. These carry the highest traffic volumes, public transit lines, and utility trunk infrastructure. Typical right-of-way: 24-36 m. Align with topography to minimize grading. Avoid routing through sensitive ecological areas.
3. Transit spine: if the site warrants transit (population >5,000 or area

   20 ha), designate a transit corridor. Locate stops at 400-600 m intervals (5-minute walk catchment). Orient the highest density and mixed-use development toward transit stops.

4. Secondary routes (collectors): connect primary routes, creating the block structure. Typical right-of-way: 18-24 m. Distribute traffic across multiple routes to avoid bottlenecks.
5. Local streets: provide direct frontage access to buildings. Typical right-of-way: 12-18 m. Design for low speeds (30 km/h or less). Consider shared surfaces in residential areas.
6. Pedestrian priority zones: designate areas where pedestrians have primacy over vehicles -- the town center, market streets, school zones, waterfront promenades. These may be fully pedestrianized or designed as woonerven.
7. Cycling network: provide a connected cycling network that links to the citywide system. Protected cycling facilities on primary and secondary routes. Shared lanes acceptable only on local streets with speeds below 30 km/h.

Green-Blue Framework

Establish the network of open spaces, ecological corridors, and water management systems.

1. Natural features: map all existing natural features -- waterways, wetlands, significant tree stands, ridgelines, steep slopes (>15%). These are the non-negotiable anchors of the green-blue framework. Protect them with appropriate buffers (minimum 15 m from waterways, 10 m from significant trees).
2. Stormwater management: design the stormwater system as a visible amenity, not buried infrastructure. Use the natural drainage direction to locate bioswales along streets, rain gardens in blocks, and detention basins as park features. Target: detain the first 25 mm of rainfall on site.
3. Park hierarchy: apply a three-tier system:
   • District park (2-10 ha): one per 10,000-20,000 residents, sports fields, playgrounds, passive recreation, community gardens.
   • Neighborhood park (0.5-2 ha): one per 3,000-5,000 residents, within 500 m walk of all dwellings. Playground, seating, lawn, shade trees.
   • Pocket park / plaza (0.05-0.5 ha): one per 500-1,000 residents, within 200 m walk. Seating, planting, public art, play elements.
4. Green corridors: connect parks and natural areas with linear green spaces at least 10 m wide. These serve as ecological corridors, pedestrian and cycling routes, and stormwater conveyance. Align with street tree planting to create a continuous urban canopy.
5. Urban ecology: target 30% tree canopy cover at maturity. Specify native species for at least 70% of plantings. Create habitat diversity: meadow, woodland, wetland, hedgerow.

Built Form Framework

Establish the three-dimensional organization of buildings and spaces.

1. Centers and edges: identify the center(s) of the masterplan -- the point(s) of highest intensity, typically at the intersection of primary routes or at transit stops. Define the edges -- the boundaries where the development meets its surroundings. Edge treatment must mediate between the new and existing.
2. Density gradient: density should peak at the center and decrease toward the edges. This creates a legible spatial hierarchy and concentrates activity where accessibility is highest. Apply a smooth gradient, not abrupt steps.
3. Building height strategy: height reinforces the density gradient. Tallest buildings at the center, stepping down toward edges and sensitive adjacencies. Define maximum height zones. Ensure that tall buildings do not overshadow public spaces for more than 50% of daylight hours at equinox.
4. Special sites: identify locations for landmark buildings (civic, cultural, religious), gateway buildings (marking entry points), and terminated vista buildings (closing axial views). These sites receive special design attention and may have different height or setback rules.
5. Street wall and setback: define the default building line for each street type. Primary streets: build-to line at the property boundary to create a continuous street wall. Local residential streets: may have a 3-5 m setback for front gardens. Parks and waterfronts: buildings face the open space with active ground floors.

The Transect as Organizing Principle

The Transect provides a gradient of human habitat from rural to urban core. Apply the following zones, selecting those appropriate to the project scale and context.

Zone	Character	Density (DU/ha)	Height	Street Type	Use Mix
T1 Natural	Preserved nature, parks	0	N/A	Trails only	None
T2 Rural Edge	Agricultural, estate lots	1-5	1-2 stories	Rural roads	Residential
T3 Suburban	Detached houses, gardens	10-25	1-3 stories	Local streets	Residential + convenience
T4 General Urban	Attached houses, walk-ups	25-60	2-4 stories	Urban streets	Mixed residential + retail
T5 Urban Center	Mid-rise mixed-use	60-150	4-8 stories	Boulevards, avenues	Full mix
T6 Urban Core	High-rise towers	150-400+	8-40+ stories	Ceremonial streets	Commercial + residential

How to apply the Transect:

1. Identify the center(s) of the masterplan -- these are T5 or T6.
2. Define zones radiating outward from the center, transitioning smoothly through T4, T3, and (if applicable) T2 and T1.
3. Each zone receives the appropriate density, height, street types, use mix, and building typologies from the zone specification.
4. Transitions between zones should occur at natural boundaries -- parks, streams, major streets -- not in the middle of a block face.

---

3. Design Parameter Ranges

The following table provides context-sensitive parameter ranges for key design metrics. Select the appropriate row based on the site's intended character and position in the urban hierarchy. All ranges are indicative; local codes and market conditions may require adjustment.

Primary Parameter Matrix

Context	Net Density (DU/ha)	FAR	Height (stories)	Coverage (%)	Green Space (%)	Block Perimeter (m)	Street Area (%)
Rural edge	5-15	0.1-0.3	1-2	20-35	40-60	600-1000	15-20
Suburban edge	15-30	0.3-0.8	1-3	40-50	30-40	400-600	25
Urban neighborhood	40-80	1.0-2.5	3-6	50-65	20-30	300-500	28
Urban center	80-150	2.0-5.0	4-12	60-75	15-25	280-450	30
High-density core	150-400+	4.0-10.0	8-40+	65-80	10-20	250-400	32

Secondary Parameters

Context	Parking (spaces/DU)	Street Width (m ROW)	Min Block Length (m)	Max Block Length (m)	Population per ha
Rural edge	2.0-3.0	10-14	100	300	10-35
Suburban edge	1.5-2.0	14-20	80	200	35-70
Urban neighborhood	0.8-1.5	16-24	60	150	90-180
Urban center	0.3-0.8	20-30	50	120	180-350
High-density core	0.1-0.5	24-36	40	100	350-1000

Use Mix Targets by Context

Context	Residential (%)	Commercial (%)	Civic/Institutional (%)	Open Space (%)	Streets/Infrastructure (%)
Suburban edge	60-75	5-10	5-8	10-15	15-20
Urban neighborhood	45-60	10-20	8-12	8-12	20-25
Urban center	30-45	25-40	8-12	5-10	22-28
High-density core	20-35	35-50	5-10	5-8	25-30

---

4. Design Generation Logic

When generating a masterplan, follow these twelve steps in order. Each step has a defined input, process, and output. Do not proceed to the next step until the current step is resolved.

Step 1: Map Constraints

Input: Site boundary, topographic data, existing infrastructure, regulatory information, environmental data from Phase 1 site analysis.

Process: Create a composite constraint map by overlaying:

• Site boundary (hard boundary -- nothing outside this line)
• Topography: slopes >15% are designated unbuildable open space
• Flood zones: 100-year flood plain is designated for open space or stormwater infrastructure only; no habitable structures below base flood elevation
• Protected features: heritage structures, significant trees (DBH >30 cm), ecological habitats, archaeological sites
• Infrastructure easements: utility corridors, pipeline setbacks, power line easements (typically 15-30 m)
• Regulatory setbacks: from adjacent properties, roads, watercourses
• Contamination: brownfield areas requiring remediation before development

Output: A constraint map showing buildable area, partially constrained area (buildable with mitigation), and unbuildable area. Calculate net developable area = gross site area minus unbuildable area.

Step 2: Identify Connections

Input: Constraint map, surrounding street network, transit routes, existing pedestrian and cycling paths, adjacent land uses.

Process: Mark every point where the site can connect to the surrounding context:

• Existing streets that terminate at the site boundary (mandatory connections)
• Potential new street connections that align with the surrounding grid
• Transit stops or stations within 800 m of the site boundary
• Pedestrian and cycling paths that reach the site boundary
• Visual connections: views into or out of the site that should be maintained

Output: A connection map showing all mandatory and optional connection points, classified by mode (vehicular, pedestrian, cycling, transit, visual).

Step 3: Establish Primary Movement Structure

Input: Connection map, constraint map, target population (from Phase 2).

Process: Draw the primary streets that connect the most important connection points across the site. These are the bones of the masterplan.

• Connect opposite sides of the site to ensure through-movement and integration with the surrounding fabric (avoid cul-de-sac plans unless topography demands)
• Align primary routes with topography to minimize grading costs
• If the site warrants transit, designate the transit corridor as a primary route
• Primary routes should pass through or adjacent to the intended center(s)
• Target 2-4 primary routes for a 20-50 ha site; 4-8 for sites over 50 ha

Output: Primary movement structure showing 2-8 main routes with approximate alignments and connection points.

Step 4: Define Centers

Input: Primary movement structure, transit stop locations, site analysis (views, solar orientation, existing features).

Process: Locate the center(s) of the masterplan -- the point(s) of highest density, activity, and urban intensity.

• Place the primary center at the intersection of primary routes, ideally at or near a transit stop
• For sites over 30 ha, consider a secondary center or neighborhood node
• The center should be on the most accessible part of the site (fewest topographic barriers, best connections to surroundings)
• Avoid placing centers on site edges unless the edge is a significant public amenity (waterfront, major park, existing high street)
• Size the center based on target population: 0.5-2 ha for 2,000-5,000 residents; 2-5 ha for 5,000-15,000; 5-10 ha for 15,000-40,000

Output: Center locations with approximate extent, intended character, and relationship to primary movement structure.

Step 5: Lay Out Secondary Street Network

Input: Primary movement structure, center locations, block size targets from the parameter matrix (Section 3).

Process: Draw secondary streets (collectors) that connect primary routes and create the block structure.

• Target block perimeters from the parameter matrix: shorter blocks near the center (250-350 m), longer blocks at edges (400-600 m)
• Ensure all blocks have at least two street frontages
• Align streets to maximize solar access: in the northern hemisphere, east-west streets create south-facing building frontage; north-south streets create morning and afternoon sun
• Create T-intersections rather than four-way intersections where possible (they slow traffic and create terminated vistas for landmark buildings)
• Ensure the street network provides multiple route choices (connectivity index target: at least 1.4, meaning 40% more links than nodes)

Output: Complete street network with block structure. All blocks should be labeled or numbered for reference.

Step 6: Establish Density Gradient

Input: Street network, center locations, Transect zone definitions (Section 2), parameter matrix (Section 3).

Process: Assign a Transect zone (T3-T6) to each block based on its distance from the center and its adjacency conditions.

• Blocks at the center: T5 or T6 (highest density, tallest buildings, full mixed-use)
• Blocks one ring out from center: T4-T5 (medium-high density, mixed-use transitioning to residential)
• Blocks at the site edge: T3-T4 (medium density, predominantly residential, responding to adjacent character)
• Blocks adjacent to sensitive edges (parks, heritage areas, low-rise neighbors): T3 maximum to ensure transition
• Blocks along transit corridors: T4-T5 regardless of distance from center

Output: Density plan showing Transect zone assigned to each block, with corresponding FAR, height, and coverage parameters.

Step 7: Size and Locate Blocks

Input: Density plan, block typology catalog from block-and-density skill.

Process: Assign a specific block typology to each block.

• Select the block typology that matches the assigned Transect zone
• Verify that the block dimensions accommodate the typology (e.g., perimeter blocks need minimum 50 m face-to-face width for adequate courtyard)
• Adjust block dimensions if necessary by shifting street alignments (secondary streets have more flexibility than primary routes)
• Ensure parcelization works: each block should be subdivisible into parcels that are independently developable

Output: Block plan with typology assigned to each block, block dimensions verified, and parcelization logic indicated.

Step 8: Distribute Land Uses

Input: Block plan with typologies, program brief (from Phase 2), use mix targets (Section 3).

Process: Assign land uses to blocks and parcels.

• Mixed-use center: ground-floor retail, upper-floor office or residential, located in T5-T6 blocks
• Residential neighborhoods: housing as the dominant use in T3-T4 blocks, with convenience retail at key corners
• Civic and institutional: distribute schools, community centers, health clinics based on population thresholds (one primary school per 3,000-5,000 residents, one community center per 5,000-10,000 residents)
• Employment: if the program includes significant office or commercial space, cluster it near transit and at the center
• Ground-floor activation: require active ground floors (retail, food and beverage, community uses) on all streets classified as "active frontage" (typically primary streets and the central area)

Output: Land use plan showing use assigned to each block/parcel with GFA per use. Verify totals against the program brief from Phase 2.

Step 9: Size and Locate Public Spaces

Input: Green-blue framework (Section 2), park hierarchy, population distribution from density plan.

Process: Size and locate public spaces to meet the service radius standards.

• Check that every dwelling is within 500 m walking distance of a park at least 0.5 ha in size
• Check that every dwelling is within 200 m of a pocket park, playground, or public plaza
• Locate the central civic space (plaza, square, or green) at the masterplan center, adjacent to the main civic or commercial buildings
• Size the central space: 0.2-1.0 ha, proportioned for the surrounding building heights (width-to-height ratio of 2:1 to 4:1 for comfortable enclosure)
• Integrate stormwater management features into parks (detention basins, bioswales, rain gardens) to minimize separate infrastructure

Output: Public space plan showing all parks, plazas, and greenways with dimensions, areas, and character descriptions.

Step 10: Apply Climate-Responsive Orientation

Input: Climate data from site analysis, building orientation from block plan.

Process: Review and adjust the masterplan for climate performance.

• Solar access: verify that primary outdoor spaces receive at least 2 hours of direct sun at winter solstice. Adjust building heights or positions to eliminate critical overshadowing
• Wind protection: verify that primary outdoor spaces are sheltered from prevailing cold-season winds. Use buildings as windbreaks; avoid creating wind tunnels between tall buildings
• Natural ventilation: in cooling-dominated climates, orient streets to capture prevailing breezes. Ensure building depths allow cross-ventilation (maximum 14 m depth for naturally ventilated buildings)
• Urban heat island: target 30% tree canopy, 40% permeable surface, light- colored paving and roofs. Ensure shade on at least 50% of pedestrian routes

Output: Climate overlay map showing shadow analysis results, wind comfort zones, ventilation corridors, and urban heat island mitigation measures.

Step 11: Verify Against Quantitative Standards

Input: Complete masterplan with all layers resolved.

Process: Calculate and verify all quantitative metrics.

• Total GFA by use type -- compare to program brief
• Net residential density by zone -- compare to parameter matrix
• Overall FAR -- compare to regulatory limits
• Green space per capita -- target minimum 9 m2 per person (WHO recommendation)
• Street area as percentage of total -- compare to parameter matrix
• Parking supply -- compare to demand model and zoning requirements
• Walking distances to key amenities -- verify all service radii are met
• Infrastructure demand estimates -- water, sewer, electrical, verify capacity

Output: Metrics summary table. Flag any metric that falls outside the acceptable range and propose adjustments.

Step 12: Define Character Areas

Input: Complete masterplan, Transect zones, land use plan, precedent references.

Process: Divide the masterplan into 3-8 named character areas, each with a distinct identity.

• Name each area (use local references, geographic features, or evocative names)
• Describe the intended character in 2-3 sentences (what does it feel like to walk through this area?)
• Specify the dominant building typology, materials palette, landscape character, and key public spaces
• Identify 1-2 precedent projects or neighborhoods that illustrate the intended character
• Define design guidelines specific to each character area (height, setback, facade articulation, ground-floor requirements)

Output: Character area map with descriptions, typology specifications, and precedent references for each area.

---

5. Phasing Strategy Framework

Phasing Principles

1. Infrastructure leads development: streets, utilities, and stormwater systems must be in place before buildings can be occupied. Phase infrastructure construction to serve each development phase.
2. Build the center first: the center establishes the identity and desirability of the entire masterplan. Phase 1 should include the central public space, the first mixed-use buildings, and any civic anchors.
3. Create critical mass early: Phase 1 must achieve enough density and mix to feel like a functioning place, not a construction site. Target 30-40% of the total residential program and 20-30% of the commercial program in Phase 1.
4. Flexibility for market response: design blocks and infrastructure to accommodate multiple building types. If market conditions shift, a block planned for offices can accommodate residential, or vice versa.
5. Interim uses activate undeveloped land: parcels not yet developed should host temporary uses (markets, community gardens, sports facilities, events) that bring people to the site and build community.

Typical Phasing Timeline

Phase	Timeline	Scope	Population Target
Phase 0: Enabling	Years 0-2	Site remediation, trunk infrastructure, primary roads, first park	0
Phase 1: Catalyst	Years 2-5	Center mixed-use, first residential neighborhoods, central plaza, primary school	30-40% of total
Phase 2: Growth	Years 5-10	Expanded residential, secondary commercial, community center, secondary streets	60-70% of total
Phase 3: Maturation	Years 10-15	Remaining parcels, refinement, infill, adaptive reuse of interim uses	85-95% of total
Phase 4: Completion	Years 15-20	Final parcels, long-term civic investments, legacy projects	100%

Population Triggers for Facilities

Facility	Population Trigger	Typical Size
Convenience store / cafe	500 residents	100-200 m2
Playground	500 residents	400-800 m2
Primary school	3,000-5,000 residents	1.0-1.5 ha
Community center	5,000-10,000 residents	800-2,000 m2
Health clinic	5,000-10,000 residents	500-1,500 m2
Secondary school	10,000-20,000 residents	2.0-4.0 ha
Library branch	10,000-20,000 residents	500-2,000 m2
Sports center	15,000-25,000 residents	2,000-5,000 m2
Supermarket	3,000-5,000 residents	1,500-3,000 m2

---

6. Output Template Reference

The masterplan report should follow the standardized template located at:

templates/masterplan-report.md

The template provides a complete report structure covering:

• Executive Summary with key numbers and vision statement
• Design Vision narrative
• Site Analysis Summary referencing site-analysis skill output
• Design Concept with spatial strategy description
• Structuring Framework (movement, green-blue, built form)
• Street Network Plan with hierarchy and cross-section references
• Land Use Plan with distribution rationale and percentages
• Density Strategy with FAR by zone and building heights
• Public Space Network with sizes and service radii
• Building Typologies by zone with character descriptions
• Sustainability Strategy with quantified targets
• Phasing Plan with timeline and catalyst projects
• Implementation Framework (governance, delivery, financing)
• Key Metrics Summary Table consolidating all quantitative data

When generating a masterplan report, populate every section with project- specific data. Use quantitative metrics wherever possible. Include specific numbers, dimensions, areas, densities, and ratios rather than vague qualitative statements. Reference cross-skill outputs where applicable.

---

7. Reference Links

Design Process Methodology

Detailed phase-by-phase methodology for masterplan design, including vision- to-form translation, charrette facilitation, and design decision frameworks:

references/design-process.md

Neighborhood Typologies

Comprehensive catalog of ten neighborhood typologies with full specifications, design rules, metrics, and precedent projects:

references/typologies.md

Phasing Strategies

Detailed phasing models, infrastructure sequencing logic, financial viability frameworks, and interim use strategies:

references/phasing-strategies.md

Cross-Skill References

This skill orchestrates outputs from multiple specialized skills. Consult each as needed during the masterplan design process:

• site-analysis: comprehensive site evaluation (Phase 1 input)
• precedent-study: reference project analysis (Phase 2 input)
• street-design: street hierarchy and cross-section design (Phase 4)
• block-and-density: block typology selection and density optimization (Phase 5)
• mixed-use-programming: land use allocation and mix strategy (Phase 6)
• public-space-design: park, plaza, and civic space design (Phase 7)
• climate-responsive-design: environmental performance optimization (Step 10)
• urban-calculator: quantitative verification and metrics (Step 11)
• sustainability-scoring: sustainability performance assessment
• zoning-and-codes: regulatory compliance verification
• mobility-and-transport: transport demand, mode split, transit planning, TIA (Phase 4)
• cost-estimation: development cost estimation and feasibility analysis (Phase 8)
• urban-regeneration: brownfield, heritage-led, and adaptive reuse strategies (brownfield/infill contexts)

How to Use References

1. Before beginning a masterplan, ensure Phase 1 site analysis is complete. Consult references/design-process.md for the full Phase 1 checklist.
2. For each Transect zone, consult references/typologies.md to select the appropriate neighborhood typology and design parameters.
3. When developing the phasing strategy, consult references/phasing-strategies.md for infrastructure sequencing logic and financial viability guidance.
4. Use templates/masterplan-report.md to structure the final deliverable.
5. Cross-reference between phases -- the strongest masterplans are those where the movement framework, green-blue framework, density gradient, and land use distribution reinforce one another as a coherent whole.