repo-healthcheck-node

name	repo-healthcheck-node
description	Verify a Node.js/TypeScript repo's development environment is correctly set up. Checks Node.js version, pnpm version, dependency installation, and build success. Use when onboarding, troubleshooting CI failures, or verifying a fresh clone.
disable-model-invocation	false
argument-hint	[--fix]
allowed-tools	Bash, Grep, Glob, Read
scope	["node","maintenance"]

Repo Healthcheck — Node.js

Verify that a Node.js/TypeScript repository's development environment is correctly set up. Reads AGENTS.md and CLAUDE.md (if present) for repo-specific version requirements and build commands, then runs each check and reports a clear pass/fail summary.

Arguments

• --fix (optional): Attempt to auto-fix failures where possible (e.g. run pnpm install if dependencies are missing). Without this flag, the skill only reports — it does not modify the environment.

Process

1. Read Repo Configuration

Read the following sources in priority order (later sources override earlier):

1. AGENTS.md — repo-specific commands and version requirements
2. CLAUDE.md (if present) — may contain additional or overriding requirements
3. .nvmrc or .node-version (if present) — authoritative Node.js version
4. package.json engines field — authoritative pnpm/node version constraints

Look for:

• Expected Node.js version — check .nvmrc / .node-version first, then package.json engines.node, then patterns in AGENTS.md/CLAUDE.md like node 24, node: 24.13, or explicit version statements.
• Expected pnpm version — check package.json engines.pnpm first, then patterns in AGENTS.md/CLAUDE.md like pnpm 10, pnpm: 10.29.3, or explicit version statements.
• Install command — default pnpm install. Override if the docs specify a different command (e.g. pnpm install --frozen-lockfile).
• Build command — default pnpm build. Override if the docs specify something different (e.g. pnpm build:packages, pnpm run compile).

If no version or command overrides are found, use the defaults and note that expectations came from defaults, not from repo configuration.

2. Run Checks

Run each check in order. Capture the result (pass/fail), the actual value, and the required value for the summary table.

Critical checks are Node.js and pnpm version. If either critical check fails, you MUST skip the dependent checks (install and build) and note the reason in the output.

Check 1 — Node.js Version

node --version

• If an expected version was found: compare using prefix matching (see Guidelines). Pass if they match; fail with actual vs expected.
• If no expected version was found: report the installed version as informational (no pass/fail judgment).
• Fix command (if --fix and failing): nvm install (reads from .nvmrc automatically, if present).

Check 2 — pnpm Version

pnpm --version

• If pnpm is not installed: MUST skip checks 3 and 4, report as missing.
• If an expected version was found: compare using prefix matching (see Guidelines). Pass if they match; fail with actual vs expected.
• If no expected version was found: report the installed version as informational (no pass/fail judgment).
• Fix command (if --fix and failing): npm install -g pnpm@latest.

Check 3 — Dependency Installation

Only run if checks 1 and 2 did not produce critical failures.

Use the install command from step 1 (default: pnpm install).

pnpm install 2>&1

• Pass if exit code is 0.
• Fail with the last 20 lines of output if exit code is non-zero.
• If --fix was passed and the default frozen-lockfile variant failed, retry without --frozen-lockfile and report whether the retry succeeded.

Check 4 — Build

Only run if check 3 passed.

Run the build command from step 1 (default: pnpm build).

• Pass if exit code is 0.
• Fail with the last 30 lines of output if exit code is non-zero.

3. Report Results

Output a summary table showing actual version vs required version for each check:

## 🏥 Repo Healthcheck — Node.js

| Check             | Status                     |
| ----------------- | -------------------------- |
| Node.js >= 24.0.0 | ✅ v24.13.0                |
| pnpm >= 10.0.0    | ✅ v10.29.3                |
| pnpm install      | ✅                         |
| Build             | ❌ Exit code 1 (see below) |

Status format:

• Pass with version: ✅ vX.X.X
• Pass without version: ✅
• Fail with version mismatch: ❌ vX.X.X (requires >= Y.Y)
• Fail with error: ❌ <short reason>
• Skipped: ⏭ Skipped (Node.js check failed)
• Informational (no expected version): ℹ vX.X.X

Follow the table with the full output for any failed checks so the user can diagnose the issue.

Issues Found

If any checks failed, add an Issues Found section with copy-pasteable fix commands:

### ❌ Issues Found

- **Node.js**: Run `nvm install` to install the required version
- **Build**: Run `pnpm build` and review the output above

Success

If ALL checks pass, add a success message with next steps:

### ✅ All Systems Go!

Environment is ready. Start the dev server with:

\`\`\`bash
pnpm start
\`\`\`

Guidelines

• You MUST read AGENTS.md and CLAUDE.md before running any checks — repo configuration takes precedence over defaults.
• You MUST always show the full results table even if some checks fail.
• You MUST skip install and build checks if a critical check (Node.js or pnpm) fails, since those checks depend on correct tooling.
• You SHOULD provide clear, copy-pasteable fix commands for any failures.
• Version comparison is prefix-based: if the expected version is 24, match any 24.x.y; if the expected version is 24.13, match any 24.13.y.
• Do not fail a version check when no expected version is found — report informational only.
• Only use --fix behaviour when the flag is explicitly passed.
• Keep output concise: show only the last N lines of command output on failure, not the full log.

RFC 2119 Key Words

• MUST / REQUIRED — Absolute requirement
• MUST NOT — Absolute prohibition
• SHOULD / RECOMMENDED — Should do unless there is a valid reason not to
• MAY / OPTIONAL — Truly optional