remove-config-param

name	remove-config-param
description	Step-by-step guide for removing a configuration parameter from NetBox, covering both static parameters (settings.py) and dynamic parameters (database-backed). Use when the user asks to remove, delete, or deprecate a configuration option or setting.

Removing a Configuration Parameter from NetBox

Before touching any files, determine which type of parameter you are removing:

Type	Where defined	How to tell
Static	settings.py via getattr(configuration, ...)	Appears in settings.py; not in config/parameters.py PARAMS
Dynamic	config/parameters.py PARAMS tuple	Appears in PARAMS; editable via Admin > System > Configuration History

Run a broad grep before starting to find all usages:

grep -r 'MY_PARAM' netbox/ --include='*.py' -l
grep -r 'MY_PARAM' docs/ -l

---

Removing a Dynamic Configuration Parameter

Step 1 — Find all usages in code

Before removing the parameter definition, identify every call site:

grep -r 'MY_PARAM\|my_param' netbox/ --include='*.py'

For get_config().MY_PARAM and ConfigItem('MY_PARAM') patterns specifically:

grep -r "get_config()\.MY_PARAM\|ConfigItem('MY_PARAM')" netbox/ --include='*.py'

Remove or replace every usage. The replacement depends on the reason for removal:

• Parameter folded into another: replace with the new parameter access
• Hard-coded default: replace get_config().MY_PARAM with the literal default value
• Feature removed: remove the surrounding code entirely

Step 2 — Remove from PARAMS

File: netbox/netbox/config/parameters.py

Delete the ConfigParam(...) block for the parameter from the PARAMS tuple.

Step 3 — Remove from the dynamic params index

File: docs/configuration/index.md

Remove the bullet-point entry for MY_PARAM from the "Dynamic Configuration Parameters" list.

Step 4 — Remove the documentation section

File: docs/configuration/<category>.md (whichever file the parameter was documented in)

Delete the ## MY_PARAM section and its content, including the trailing --- separator.

Step 5 — Remove from the example config (if present)

File: netbox/netbox/configuration_example.py

If a commented # MY_PARAM = ... line was added when the parameter was introduced, remove it.

No migration needed

Dynamic parameters are stored as keys in the ConfigRevision.data JSONField. Removing the ConfigParam definition from PARAMS means the UI no longer shows the field and the Config object no longer exposes the attribute — but old ConfigRevision rows in the database will silently retain the key in their JSON blob. This is harmless and requires no migration.

---

Removing a Static Configuration Parameter

Step 1 — Find all usages in code

grep -r 'MY_PARAM' netbox/ --include='*.py'

Remove every reference. For Django settings accessed via settings.MY_PARAM, also search templates:

grep -r 'MY_PARAM' netbox/templates/

Step 2 — Remove from settings.py

File: netbox/netbox/settings.py

1. Delete the MY_PARAM = getattr(configuration, 'MY_PARAM', ...) line.
2. If the parameter was required (listed in the required-parameter check near the top), remove it from that tuple:

   # Before:
   for parameter in ('ALLOWED_HOSTS', 'MY_PARAM', 'SECRET_KEY', 'REDIS'):
   # After:
   for parameter in ('ALLOWED_HOSTS', 'SECRET_KEY', 'REDIS'):
   

3. Remove any validation block that immediately followed the getattr line (e.g. if MY_PARAM not in (...): raise ImproperlyConfigured(...)).

Step 3 — Remove from the example config

File: netbox/netbox/configuration_example.py

Delete the commented # MY_PARAM = ... line.

Step 4 — Remove the documentation section

File: docs/configuration/<category>.md

Delete the ## MY_PARAM section and its content, including the trailing --- separator.

---

Deprecation vs. Immediate Removal

If the parameter is used by existing deployments, consider a two-phase removal:

Phase 1 (current release) — Deprecate:

1. Keep the getattr / ConfigParam definition in place so existing configs don't break.
2. Add a deprecation warning comment in settings.py (see how SENTRY_DSN is handled with # TODO: Remove in NetBox vX.Y).
3. Log a warnings.warn(...) or add a startup notice if the parameter is still set.
4. Mark the doc section as deprecated.

Phase 2 (future release) — Remove: Follow the full removal steps above.

---

Common Gotchas

• Remove all call sites first — if code still calls get_config().MY_PARAM or settings.MY_PARAM after the definition is gone, startup or runtime will raise AttributeError.
• Old ConfigRevision rows retain the key in their JSON blob — this is harmless and requires no migration. The risk is code: any remaining call to get_config().MY_PARAM or settings.MY_PARAM after the definition is gone will raise AttributeError. Remove all code references before removing the ConfigParam definition.
• configuration.py in user deployments — removing a static parameter may cause a TypeError or silent failure if users have MY_PARAM = ... in their local configuration.py. Document the removal in the release notes.
• No ruff format on existing files — use ruff check only.

Summary Checklist

Dynamic parameter

#	File(s)	Action
1	All .py files	Remove all get_config().MY_PARAM and ConfigItem('MY_PARAM') usages
2	netbox/netbox/config/parameters.py	Remove ConfigParam(...) block from PARAMS
3	docs/configuration/index.md	Remove bullet-point entry
4	docs/configuration/<category>.md	Remove ## MY_PARAM section
5	netbox/netbox/configuration_example.py	Remove commented entry (if present)

Static parameter

#	File(s)	Action
1	All .py and template files	Remove all settings.MY_PARAM / MY_PARAM usages
2	netbox/netbox/settings.py	Remove getattr line; remove from required-params tuple; remove validation block
3	netbox/netbox/configuration_example.py	Remove commented entry
4	docs/configuration/<category>.md	Remove ## MY_PARAM section

References

• Dynamic param definitions: netbox/netbox/config/parameters.py
• Config loading / Config class: netbox/netbox/config/__init__.py
• ConfigRevision model: netbox/core/models/config.py
• Static config loading: netbox/netbox/settings.py lines 67–213
• Example config: netbox/netbox/configuration_example.py
• Documentation: docs/configuration/
• add-config-param skill: .claude/skills/add-config-param/SKILL.md (reverse of this skill)