vibe-commit

version	1.0.3
name	vibe-commit
description	Use when the user asks to commit, stage, or "save" agent-assisted coding changes — including vague requests like "commit this", "commit please", "コミットして", or "/commit" — and the real work is deciding which files belong in the commit, excluding unwanted or generated files, splitting unrelated changes, or fixing a commit's file set, multi-line message transport, history (amend/rebase), or authorship trailers. This skill owns commit execution, message transport, and git safety.

Vibe Commit

Overview

A vague "commit please" is a request to turn a messy working tree into one clean, correctly scoped commit — not a request to run git add -A && git commit. The instruction is underspecified on purpose: the user trusts the agent to decide what belongs in the commit, keep junk out, and leave a message and history a future maintainer can use.

This skill governs the execution of that: which files to stage, what to keep out, how to re-verify the staged set before committing, how to transport a multi-line message without corruption, and how to amend or repair a commit while keeping authorship trailers intact. The guidance here is distilled from real agent sessions where these exact steps prevented — or, when skipped, caused — commit mistakes.

Message content vs. commit execution

Commit work splits cleanly between message content and execution:

• The commit message content must stand on its own: an outcome-focused Conventional Commit subject, body only for durable context the diff cannot recover, durable verification references, no prompt/session/plan labels, and no Markdown wrappers in message bytes.
• vibe-commit owns the execution: staging, exclusion, the pre-commit verification gate, command safety, history mutation, message transport, and trailers as a transport mechanism.

Apply the compact message rules in references/history-and-trailers.md whenever this skill prepares, inspects, amends, or repairs a commit message. The commit's bytes — file set, message transport, trailer footer, and stored message — are this skill's responsibility, and you verify them after committing.

Authority and safety boundary

Committing locally is reversible; publishing is not. Stay on the reversible side of that line unless the user says otherwise.

• Commit when asked; do not push. A request to commit is not a request to push. Do not git push unless the user explicitly asks.
• Do not rewrite shared history. Amending or rebasing an already-pushed commit rewrites history other clones depend on. Only amend/rebase commits that have not left this machine, and never force-push a shared branch without an explicit, informed request.
• Honor .gitignore and the agreed scope. Never git add -f an ignored path, and never stage files outside the change being committed, unless the user explicitly asks to include that ignored path after you have surfaced why it is ignored and what risk that creates. Decide scope by the user-visible change, not by whatever happens to be dirty.
• No surprise side effects. Do not bump versions, cut releases, or trigger hooks the repo did not ask for as a byproduct of committing.

Core workflow: "commit please" → one clean commit

Follow this spine. Each step names the load-bearing command; the references go deeper on the judgment calls.

1. Discover everything. git status --short --branch --untracked-files=all and git status --ignored show every modified, staged, untracked, and ignored path in one view. Add git log -1 --oneline and git branch --show-current so you know the branch and the commit you might extend.
2. Inspect intent. Read the actual changes — git diff --stat, then git diff -- <file> for specific files and git diff -- <newfile> (or open it) for untracked ones. Decide what each path is before deciding whether it belongs.
3. Classify and select. Sort every changed path into (a) the core deliverable that forms ONE logical change — implementation plus its tests and the docs/CHANGELOG/spec it fulfills — versus (b) out-of-scope edits or generated artifacts. Split unrelated concerns into separate commits. See references/file-selection.md.
4. Exclude deliberately. Leave generated, scratch, plan/spec, build, unrelated lock, agent-state (.agents/, .claude/, .codex/), and secret paths unstaged. A lockfile that records a dependency change needed by the selected commit is in-scope with the manifest; do not drop it just because it is a lockfile. When unsure whether a path is ignored, git check-ignore -v <path>. See references/file-selection.md.
5. Stage explicitly. git add -- <path1> <path2> … by full name. Avoid git add . / -A / globs in a dirty tree — they silently sweep in strays. For a file with mixed in-scope and out-of-scope hunks, git add -p <file>.
6. Re-verify the staged set (mandatory gate). Before committing, confirm what you are about to commit: git diff --cached --name-only (exact files), git diff --cached --stat (volume sanity), git diff --cached (read the hunks), git diff --cached --check (whitespace/line-ending errors). In-scope files present, out-of-scope/ignored files absent, diff matches intent. This 2–3 second gate is the single highest-leverage habit; see references/staging-and-recovery.md.
7. Decide amend vs. new. Create a NEW commit by default. Only --amend to fix the immediately preceding, unpushed commit. See references/history-and-trailers.md.
8. Compose the message. Conventional Commits type(scope): summary (imperative, ≤72 chars) naming the outcome, blank line, then a body only when it preserves durable context the diff cannot recover. Detect the repo's trailer convention first: git log -5 --format='%H%n%B'.
9. Transport the message safely. For any multi-line body, use a heredoc (git commit -F - <<'EOF' … EOF, single-quoted delimiter) or git commit -F <file>. Add or repair authorship trailers with a git commit ... --trailer 'Key: value' command — including git commit --amend ... --trailer or git commit -C <ref> --trailer ... for local rewrites — not by typing them into the body or a synthesized message payload. Never embed raw newlines in a single -m. See references/history-and-trailers.md.
10. Post-verify the stored commit. git show -s --format=%B HEAD confirms subject/body/trailer landed byte-correct and the trailer parsed as a footer; for newly added or repaired authorship trailers, also confirm the command path used git commit ... --trailer. For body messages, inspect the stored message for low-signal verification dumps and local-only proof-source leakage such as git-unmanaged local generated artifacts, ignored result files, local-only run IDs, or private tool-session records. git show --stat HEAD confirms the committed file set; git status --short confirms only intentionally-left files remain and nothing leaked.
11. Recover reversibly if wrong. Prefer the least-destructive fix: git restore --staged <file> to unstage, git reset --soft HEAD~1 to undo a commit while keeping changes, git commit --amend --no-edit --trailer … to fix a just-made local commit. See references/staging-and-recovery.md.

When the request is narrower

Not every invocation is a full "commit please." Jump to the relevant reference:

• "did I stage the right things?", "check what's staged", split a commit, drop a stray file → references/staging-and-recovery.md
• "this got committed and shouldn't have", undo/unstage, fix a wrong file set, recover lost work → references/staging-and-recovery.md
• fix the last commit, amend, reword, add/fix a Co-Authored-By, multi-line message corruption → references/history-and-trailers.md
• "what should I commit / leave out?", excluding generated or secret files → references/file-selection.md
• "commit the staged changes" → do not invent extra staging, but still run the mandatory staged-set gate before committing and the stored-commit verification after committing.
• "show the exact commit command" or "commit command only" → include the exact git commit ... invocation, but do not collapse the answer to that one line. The safe artifact is the command sequence: staged-set verification, commit command, then stored-message/file-set verification. Simple docs commits and trailer-only commits are not exempt.
• the user supplies git status, git diff, or git log excerpts → treat them as evidence, but still run or show the corresponding inspection commands in the sequence. Do not jump from supplied excerpts straight to staging, committing, amending, or splitting.
• a commit subject needs evidence → choose a concrete Conventional Commit subject before showing an executable git commit, or stop before the commit command. Use supplied user intent even when it is broad: a named feature, bug fix, module, or behavior change is enough for a conservative subject. Do not defer a usable broad subject to future diff output merely to make it more precise. If paths/status are the only evidence and no behavior or fix class is supplied, inspect git diff or git diff --cached first; in a response-only command plan, show that inspection step and omit git commit until a concrete subject can be written. A commit command block whose subject contains angle-bracket text, unresolved-marker words, or instructions to fill the subject later is still an invalid shown command even if prose says not to run it.
• partial staging is needed → verify both sides with file-specific diffs: git diff --cached <file> for the committed hunk and git diff <file> for the intentionally-left local hunk. Show both as explicit verification commands before committing; a prose note or git status is not a substitute.
• an amend/rebase would touch pushed history → name the concrete collaboration risk: other clones can diverge and collaborators may have to rebase, reset, or reconcile duplicated commits.
• a user-named path is absent from git status → check git check-ignore -v <path> before deciding. If it is ignored, especially local config or secret-like data, do not force-add it merely because the path was named; state that the requested scope cannot be fully committed without an explicit override after the ignore rule is known.

Common mistakes

• git add . / -A / a glob in a dirty tree, sweeping in unrelated edits, generated output, lock files, or secrets.
• Committing immediately after git add without re-reading the staged diff.
• Force-adding or accidentally committing ignored/scratch content (eval workspaces, plans/, .codex/, .env).
• Committing a whole generated directory instead of just its durable spec (evals/<name>/ vs. evals/<name>/evals.json).
• Multi-line message corruption from a single -m with embedded newlines, or a double-quoted heredoc that lets the shell expand $/backticks.
• Trailer corruption: trailers typed into the body, added through git interpret-trailers --trailer plus plumbing or a synthesized message file, dropped when rewording with --amend -m (re-add with --trailer), wrong capitalization, or a stray Key: value body line folding into the footer.
• Mixing unrelated concerns into one commit so blame, bisect, and revert get messy.
• Destructive recovery without a plan (git reset --hard, force-push) that loses work or rewrites shared history.

Self-check

Before reporting the commit done:

• Does the staged set match the user-visible change, with no out-of-scope, generated, ignored, or secret files?
• Did you read git diff --cached (not just the file list) and run --check?
• Is the subject a Conventional Commit naming the outcome, with the body kept to context the diff cannot recover?
• Did you verify the stored commit (git show -s --format=%B HEAD and git show --stat HEAD), not just the command you ran?
• If a trailer was required, did it land as a parsed footer in the exact authorship form for the agent that wrote the commit and the repo's existing convention?
• If an authorship trailer was newly added or repaired, did the transport path use git commit --trailer, git commit --amend ... --trailer, or git commit -C ... --trailer, never a hand-edited footer, raw append, or plumbing-created message?
• Did anything outside the agreed scope get committed, pushed, or rewritten?