aidp-fusion-bootstrap

name	aidp-fusion-bootstrap
description	Guide and run the Oracle AIDP Fusion bundle bootstrap phase. Validates bundle/config readiness, checks AIDP/Fusion/IAM prerequisites, runs `aidp-fusion-bundle bootstrap --check-iam` or `bootstrap --refresh`, surfaces tenant variation choices pinned into the active profile YAML and evidence snapshots, and routes unresolved variation failures (`AIDPF-2010` / `AIDPF-2011`) to `/medallion-author`. Use when the user says 'bootstrap', 'pin tenant variation', 'create the profile', 'run pre-seed checks', 'missing profile', 'bootstrap --refresh', or needs the setup phase before seed/incremental. NOT for seed runs, incremental refresh, OAC dataset/workbook work, or net-new mart authoring.
allowed-tools	Read, Bash, Glob, Grep

aidp-fusion-bootstrap — bootstrap tenant profile and variation

This skill owns the bootstrap phase only: validate the customer project, run the CLI bootstrap safely, surface what tenant variation was pinned, and route bootstrap-specific failures. It shells out to aidp-fusion-bundle; it never edits profiles/, evidence/, or diagnostics directly.

Bootstrap is the bridge between configuration and first seed. It probes prerequisites, resolves content-pack variation points against the tenant, and writes the runtime profile used by seed and incremental runs.

When to use

• "Run bootstrap", "bootstrap this tenant", "pin tenant variation".
• "Create the profile", "my profile is missing", "profiles/.yaml is absent".
• "Run pre-seed checks", "check IAM before seed", "verify BICC/AIDP prerequisites".
• "Run bootstrap --refresh" after AIDPF-2012, PVO/source drift remediation, or a Fusion release change.
• A seed or incremental precondition reports missing: ["profile"].

When NOT to use

• First materialization or overwrite of bronze/silver/gold -> /aidp-fusion-seed.
• Day-2 refresh -> /aidp-fusion-incremental.
• Runtime drift diagnosis (AIDPF-2072, AIDPF-4070/4071, AIDPF-4040) -> /fusion-drift-doctor.
• Authoring new analytical content -> /mart-author.
• OAC connection, dataset, or workbook work -> OAC dataset/workbook skills.

What bootstrap does

• Runs pre-onboarding probes: bundle/config shape, BICC auth, BICC catalog reachability, AIDP REST, and optional IAM checks.
• Probes the tenant bronze schema for the active content pack. When a bronze table is already landed it reads the live Delta schema; when it is not yet landed (a fresh tenant) it resolves the same schema from the BICC PVO source via a metadata-only inferSchema probe — so bootstrap runs before the first seed, with no chicken-and-egg. The fingerprint is identical either way (bronze audit columns are stripped before fingerprinting).
• Walks pack-declared columnAliases and semanticVariants.
• Pins resolved values to profiles/<contentPack.profile>.yaml.
• Writes profiles/<contentPack.profile>.schema-snapshot.yaml.
• Writes evidence under evidence/<profile>/<timestamp>.yaml.
• On unresolved required variation points, writes diagnostics under .aidp/diagnostics/<run_id>/.

Bootstrap is the only writer to profiles/ and evidence/. Do not hand-edit resolved profile values to make a run pass.

Workflow

1. Confirm project root and config readiness

Run from the customer project root, where bundle.yaml and aidp.config.yaml live. Validate first:

aidp-fusion-bundle validate

If available, use the shared precondition helper for a structured view. Resolve the helper relative to this skill directory, or use its absolute path when your shell is in a customer project:

python3 ../aidp-fusion-seed/preconditions.py \
  --bundle bundle.yaml \
  --config aidp.config.yaml \
  --env <env>

Interpret missing for bootstrap this way:

• bundle: stop and have the user run aidp-fusion-bundle init or fix bundle.yaml.
• config: route to /aidp-fusion-config; bootstrap cannot invent AIDP coordinates.
• profile: this is the bootstrap target; proceed unless another blocker exists.
• cluster: start or fix the AIDP cluster before default cluster-dispatched bootstrap.

Also confirm the Fusion password is in the AIDP credential store as fusion_bicc_password with key password. Do not ask the user to paste secrets into chat.

2. Choose initial bootstrap vs refresh

Use initial bootstrap when no valid profile exists:

aidp-fusion-bundle bootstrap --check-iam

Use refresh only when a prior profile exists and you are re-pinning against live bronze after drift or a Fusion release change:

aidp-fusion-bundle bootstrap --refresh --check-iam

Do not run --refresh as a blind fix for unrelated seed failures. Runtime drift codes should be diagnosed by /fusion-drift-doctor first, then routed here when the safe fix is bootstrap refresh.

3. Preserve operator control

Bootstrap can freeze tenant variation choices. Before running, tell the user:

• which profile will be written,
• whether this is initial pinning or refresh,
• whether IAM checks are enabled,
• whether the run may prompt for a multi-match variation choice.

Prefer the default interactive operator path for real tenants. Do not use --non-interactive for customer onboarding unless the user explicitly asks for CI/sandbox behavior and accepts first-candidate auto-pick semantics.

For audit identity issues (AIDPF-1020), ask for or set a concrete operator:

aidp-fusion-bundle bootstrap --check-iam --operator "<operator-id>"

4. Run bootstrap and classify the result

On success, report the concrete artifacts:

• profiles/<contentPack.profile>.yaml
• profiles/<contentPack.profile>.schema-snapshot.yaml
• latest evidence/<profile>/<timestamp>.yaml
• key resolved variation choices: column aliases and semantic variants
• any IAM/BICC/AIDP warnings that remain

Then hand off to /aidp-fusion-seed for first materialization.

On failure, classify before recommending action:

Failure	Meaning	Route
AIDPF-2010	Required columnAliases variation point had no candidate on tenant bronze.	/medallion-author
AIDPF-2011	Required semanticVariants variation point had no matching detector.	/medallion-author
AIDPF-1020	Operator identity missing.	Re-run with --operator or fix AIDP_OPERATOR / USER.
BICC auth/storage	Fusion or BICC external storage prerequisite missing.	Fix Fusion/BICC setup; do not author overlays.
AIDP REST/IAM	Workspace/cluster/permission issue.	Fix config/IAM/cluster before rerun.

For AIDPF-2010 / AIDPF-2011, point the user at the diagnostics directory:

.aidp/diagnostics/<run_id>/AIDPF-2010__<variation-point>.json
.aidp/diagnostics/<run_id>/AIDPF-2011__<variation-point>.json

Then invoke or recommend /medallion-author. That skill reads the diagnostics and drafts an overlay; bootstrap remains the only step that commits the final profile/evidence by rerunning initial bootstrap or bootstrap --refresh.

5. Refresh-specific rules

Use bootstrap --refresh when:

• /fusion-drift-doctor classifies drift as mechanically re-pinnable.
• AIDPF-2012 reports bronze fingerprint drift and the operator confirms the bronze change is intended.
• A profile predates schema-snapshot support and needs back-fill.

Refresh must not silently change pinned choices. If refresh wants to change a pinned value, surface the old value, proposed value, evidence, and ask the user before continuing. If a new candidate is needed, route to /medallion-author.

For power-user refresh after known-good onboarding, --skip-preonboarding-probes is available only with local dispatch. Do not use it as the default demo or customer path.

Output contract

Finish with a compact bootstrap ledger:

bootstrap: success
profile: profiles/finance-default.yaml
schema snapshot: profiles/finance-default.schema-snapshot.yaml
evidence: evidence/finance-default/<timestamp>.yaml
variation: 12 column aliases pinned, 2 semantic variants pinned
next: /aidp-fusion-seed

On failure:

bootstrap: failed AIDPF-2010
diagnostics: .aidp/diagnostics/<run_id>/AIDPF-2010__invoice_currency_code.json
route: /medallion-author to draft an overlay, then re-run bootstrap

Safety invariants

• The CLI is the contract; never import orchestrator internals or mutate state directly.
• Do not edit profiles/, profiles/*.schema-snapshot.yaml, or evidence/ by hand.
• Do not treat pack YAML as proof that the tenant profile exists.
• Do not run seed from this skill; hand off to /aidp-fusion-seed.
• Do not hide variation choices. Surface what bootstrap pins.
• Route unresolved variation (AIDPF-2010 / AIDPF-2011) to /medallion-author, not /mart-author.
• Keep secrets out of chat and logs.