land

name	land
description	Squash-merge the issue's PR once it's approved and green. Use only when the issue is in the `Merging` state — Symphony's status router gates entry.

Land

Preconditions

• Issue state is Merging.
• gh auth status succeeds.
• A PR is attached to the issue and is OPEN (not CLOSED/MERGED).

If the PR is already MERGED when entering this skill, skip the merge: record the merge SHA in the workpad and move the issue to Done.

Steps

1. Inspect the PR:

   gh pr view --json number,state,mergeable,mergeStateStatus,reviewDecision,statusCheckRollup
   

   Required: state=OPEN, reviewDecision=APPROVED (or no required reviewers).
2. Sync first — run the pull skill to merge origin/main. Conflicts must be resolved in code; never leave a DIRTY/CONFLICTING PR. Re-run validation after the merge.
3. Push the merge result with the push skill.
4. Wait for CI to be green. Don't rely on gh pr merge --auto — it only blocks on checks that branch protection marks as required, and many repos either configure no required checks or only a subset. Poll gh pr checks explicitly so the gate works the same whether the repo enforces checks at the GitHub level or not — every 30s, up to 30 minutes, before merging:

   for _ in $(seq 1 60); do
     gh pr checks
     rc=$?
     case "$rc" in
       0) break ;;       # all checks passed
       8) sleep 30 ;;    # checks still pending — keep waiting
       *) echo "PR checks failed (exit $rc)" >&2; exit 1 ;;
     esac
   done
   [ "$rc" -eq 0 ] || { echo "Timed out waiting for checks" >&2; exit 1; }
   

   gh pr checks exits 0 only when every check passed; 8 while any are pending; non-zero/non-8 if any failed. A failure or timeout falls into the failure-mode handler below: record the cause and move the issue to Rework.
5. Squash-merge:

   gh pr merge --squash
   

   gh pr merge returning success does not guarantee the PR is merged — if the repo has a merge queue (or any auto-merge path kicks in), the command can return after enqueueing and the PR will still be OPEN while the queue runs. Verify in step 6 before continuing.
6. Wait for the PR to reach terminal MERGED state — every 15s, up to 30 minutes:

   for _ in $(seq 1 120); do
     state=$(gh pr view --json state -q .state)
     case "$state" in
       MERGED) break ;;
       OPEN)   sleep 15 ;;
       *)      echo "PR ended in unexpected state: $state" >&2; exit 1 ;;
     esac
   done
   [ "$state" = "MERGED" ] || { echo "Timed out waiting for MERGED" >&2; exit 1; }
   

   A CLOSED (without MERGED) state or a timeout falls into the failure-mode handler below.
7. Capture the merge commit (only after state=MERGED):

   gh pr view --json mergeCommit -q .mergeCommit.oid
   

8. The remote head branch usually auto-deletes. If not, leave it — don't delete in scripts.
9. Record the merge SHA in the workpad's ### Notes and move the issue to Done.

Failure modes → Rework

If any of the following hit, record the cause in the workpad and move the issue to Rework with a brief blocker note:

• PR checks went red on the merge candidate and you can't fix locally.
• The gh pr checks wait loop times out (still pending after 30 min).
• The merge result reintroduces a conflict you can't resolve.
• gh pr merge --squash keeps failing (e.g., mergeStateStatus flips to BLOCKED/DIRTY, or the PR transitions to CLOSED without MERGED).
• The post-merge state=MERGED wait loop times out, or the PR ends in CLOSED without MERGED (e.g., merge queue rejected it).

Do not force-push, reset, or close-and-reopen the PR to escape the failure.