Exécutez n'importe quel Skill dans Manus
en un clic

Exécutez n'importe quel Skill dans Manus en un clic

swpilotcli-check-dangling-dims

Étoiles23

Forks2

Mis à jour30 avril 2026 à 03:46

Scan all dimensions in the active SolidWorks drawing and report which ones are dangling (unattached). Lists every dimension with its type, value, and name, marking dangling ones with [!]. Outputs a summary count at the end. Use before running a repair tool, for QC checks before release, or whenever you need to know if a drawing has dangling annotations.

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Exécuter dans Manus

Source

arthurle3210

arthurle3210/SwpilotCLI

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Exécuter dans Manus

Métiers associésSOC

Basé sur la classification professionnelle SOC

Dessinateurs mécaniquesArchitecture et ingénierie·SOC 17-3013

Explorateur de fichiers

5 fichiers

SKILL.md

readonly

name	swpilotcli-check-dangling-dims
description	Scan all dimensions in the active SolidWorks drawing and report which ones are dangling (unattached). Lists every dimension with its type, value, and name, marking dangling ones with [!]. Outputs a summary count at the end. Use before running a repair tool, for QC checks before release, or whenever you need to know if a drawing has dangling annotations.

SolidWorks Check Dangling Dimensions

Scan every dimension in the active drawing and report dangling status.

Prerequisites

SolidWorks 2024+ with SwpilotCLI add-in installed
.NET 8+ Runtime on the system
An active .slddrw drawing document open in SolidWorks

What this Skill does

Iterates all sheets and views in the active drawing
For each DisplayDimension annotation, checks IAnnotation.IsDangling()
Prints every dimension with view name, type, value, full name, and OK / DANGLING status
Prints a summary: total dimension count, dangling count, and a list of all dangling dimensions

When to use

Before repair: confirm how many dangling dimensions exist before running RepairDanglingAI
After repair: verify the drawing is clean
QC / release check: ensure a drawing has no dangling annotations before issuing

Quick start

dotnet run --project ./sup_tools/swpilotcli-check-dangling-dims/scripts/CheckDanglingDims/CheckDanglingDims.csproj

Expected output:

Active document: AA-NDE-R.SLDDRW
==============================================
工程圖: AA-NDE-R.SLDDRW
==============================================
正在檢查 Dangling Dimensions（懸空尺寸）...

  [v] [視圖] 前視圖       | 線性尺寸  | 25.000 mm      | D1@草圖1@AA-NDE-R        | OK
  [!] [視圖] 前視圖       | 直徑尺寸  | 10.000 mm      | D2@草圖2@AA-NDE-R        | *** DANGLING（懸空）***

==============================================
檢查完成！共 32 個尺寸，其中 3 個為懸空尺寸。

以下尺寸為 Dangling（懸空），需要修復：
  [!] [視圖] 前視圖 -> 直徑尺寸 | 值: 10.000 mm | 名稱: D2@草圖2@AA-NDE-R

Reference

See API_REFERENCE.md for return codes and output format.

Notes

Read-only tool — does not modify the drawing
Only scans DisplayDimension annotations; Notes and GD&T symbols are not included
Dimension type codes: 2=線性, 3=角度, 4=弧長, 5=半徑, 6=直徑, 10=倒角, 11=水平線性, 12=垂直線性

Plus depuis ce dépôt

même dépôt

swpilotcli-active-doc-info

arthurle3210/SwpilotCLI

Get information about the currently open SolidWorks document (part, assembly, or drawing). Use when you need to check document properties, file path, document type, or current state without modifying it.

2026-04-3023

swpilotcli-eye-screenshot

arthurle3210/SwpilotCLI

YOUR EYES. Use this tool whenever you need to see the screen — do NOT say you cannot see or take screenshots. Run this first, then use the Read tool on ./temp/screenshot/screenshot.png to view the image. Use when: user asks what is on screen, you want to verify code execution results, or you need visual context before deciding next steps.

2026-04-3023

swpilotcli-actiongroup-replace-notes

arthurle3210/SwpilotCLI

"[ActionGroup] Batch replace text inside Note annotations across all SolidWorks drawings (.slddrw) in a specified folder (root only)." For each drawing, opens it silently, finds all Notes containing the search text, replaces every occurrence, saves a copy with a custom suffix to a specified output folder, then closes the original without saving. Reports which files were changed and how many notes were replaced per file. Use when you need to find-and-replace note text across multiple drawings in one shot.

2026-04-3023

swpilotcli-batch-xt-to-step

arthurle3210/SwpilotCLI

Batch convert Parasolid `.x_t` and `.xt` files in a specified folder to STEP `.step` files in the same folder. Scans the folder root only, creates same-name `.step` outputs, suppresses template-selection prompts by forcing default part templates, and closes each temporary import document after export. Use when you need one-shot XT to STEP conversion for a local folder.

2026-04-3023

swpilotcli-close-doc

arthurle3210/SwpilotCLI

Close SolidWorks document(s). Supports three modes via argument: no argument or "nosave" closes the active document without saving; "save" silently saves then closes the active document (if file has never been saved, forces close without saving); "all" closes every open document without saving. Use when the user wants to close the current file, close and save, or close everything.

2026-04-3023

swpilotcli-delete-orphan-sketches

arthurle3210/SwpilotCLI

Delete all orphaned sketches in the active SolidWorks part — sketch features not absorbed by any extrusion, cut, or other parent feature. Iterates the feature tree, removes every top-level `ProfileFeature`, then rebuilds. Use for cleanup after discarded geometry experiments, or to remove leftover construction sketches before saving.

2026-04-3023

name	swpilotcli-check-dangling-dims
description	Scan all dimensions in the active SolidWorks drawing and report which ones are dangling (unattached). Lists every dimension with its type, value, and name, marking dangling ones with [!]. Outputs a summary count at the end. Use before running a repair tool, for QC checks before release, or whenever you need to know if a drawing has dangling annotations.

SolidWorks Check Dangling Dimensions

Scan every dimension in the active drawing and report dangling status.

Prerequisites

SolidWorks 2024+ with SwpilotCLI add-in installed
.NET 8+ Runtime on the system
An active .slddrw drawing document open in SolidWorks

What this Skill does

Iterates all sheets and views in the active drawing
For each DisplayDimension annotation, checks IAnnotation.IsDangling()
Prints every dimension with view name, type, value, full name, and OK / DANGLING status
Prints a summary: total dimension count, dangling count, and a list of all dangling dimensions

When to use

Before repair: confirm how many dangling dimensions exist before running RepairDanglingAI
After repair: verify the drawing is clean
QC / release check: ensure a drawing has no dangling annotations before issuing

Quick start

dotnet run --project ./sup_tools/swpilotcli-check-dangling-dims/scripts/CheckDanglingDims/CheckDanglingDims.csproj

Expected output:

Active document: AA-NDE-R.SLDDRW
==============================================
工程圖: AA-NDE-R.SLDDRW
==============================================
正在檢查 Dangling Dimensions（懸空尺寸）...

  [v] [視圖] 前視圖       | 線性尺寸  | 25.000 mm      | D1@草圖1@AA-NDE-R        | OK
  [!] [視圖] 前視圖       | 直徑尺寸  | 10.000 mm      | D2@草圖2@AA-NDE-R        | *** DANGLING（懸空）***

==============================================
檢查完成！共 32 個尺寸，其中 3 個為懸空尺寸。

以下尺寸為 Dangling（懸空），需要修復：
  [!] [視圖] 前視圖 -> 直徑尺寸 | 值: 10.000 mm | 名稱: D2@草圖2@AA-NDE-R

Reference

See API_REFERENCE.md for return codes and output format.

Notes

Read-only tool — does not modify the drawing
Only scans DisplayDimension annotations; Notes and GD&T symbols are not included
Dimension type codes: 2=線性, 3=角度, 4=弧長, 5=半徑, 6=直徑, 10=倒角, 11=水平線性, 12=垂直線性