migrate

name	migrate
description	Apply pending Accelerator meta-directory migrations to bring a repo into line with the latest plugin schema. Destructive by default but guarded — refuses to run on a dirty working tree and prints a one-line preview per pending migration before applying.
allowed-tools	["Read","Write","Edit","Bash"]

Warning: this skill rewrites files in meta/ and .claude/accelerator*.md. Recovery is via VCS revert. Before running, ensure your repo is committed and you understand what each pending migration does. The safety guards (clean-tree check, preview) exist to give you a moment to stop — they are not a substitute for understanding the changes.

When to invoke

Run /accelerator:migrate after upgrading the Accelerator plugin to a version that bundles new migrations. The SessionStart hook will tell you when this is needed:

[accelerator] .accelerator/state/migrations-applied is behind the plugin
(highest applied: 0001-rename-tickets-to-work; highest available: 0002-...).
Run /accelerator:migrate to bring it up to date.

You can also run it proactively — if no migrations are pending, it prints No pending migrations. and exits cleanly.

Upgrade sequence. After pulling a new plugin version, run /accelerator:migrate before invoking any skill that reads or writes paths affected by pending migrations. Skills do not gate themselves on pending migrations; the SessionStart hook only warns when migrations are pending. Running write-side skills (e.g., /accelerator:research-codebase) between the plugin upgrade and the migration may produce results written to or read from new-default paths that do not yet exist on disk.

How it works

The driver script skills/config/migrate/scripts/run-migrations.sh orchestrates the migration lifecycle:

1. Clean-tree pre-flight. Checks meta/, .claude/accelerator*.md, and .accelerator/ for uncommitted changes. Aborts if any are found. Set ACCELERATOR_MIGRATE_FORCE=1 to bypass (advanced users only).
2. Read state. Loads .accelerator/state/migrations-applied and .accelerator/state/migrations-skipped — newline-delimited lists of migration IDs. If either file is absent, its set is empty. Unknown IDs (from a newer plugin version) are preserved verbatim and warned about. An ID appearing in both files triggers a warning; applied takes precedence.
3. Discover migrations. Globs skills/config/migrate/migrations/[0-9][0-9][0-9][0-9]-*.sh in sorted order. The directory can be overridden via ACCELERATOR_MIGRATIONS_DIR (used in tests).
4. Compute pending. A migration is pending if its ID is in neither the applied nor the skipped set.
5. Preview banner. Prints one line per pending migration — <ID> — <description> — with a per-migration skip hint (--skip <id>). If nothing is pending, prints No pending migrations. (plus any skipped names) and exits 0 immediately.
6. Apply in order. For each pending migration: runs it with PROJECT_ROOT exported; on success atomically appends its ID to .accelerator/state/migrations-applied; on failure prints the migration's output to stderr, exits 1, and leaves the state file at the last successful migration. If the migration emits MIGRATION_RESULT: no_op_pending on stdout, it is treated as a soft skip — the migration stays pending and will be retried on future runs.
7. Summary. Prints counts of applied, skipped, and pending (no-op) migrations.

Per-migration contract

Each migration script under migrations/ must:

• Start with #!/usr/bin/env bash then # DESCRIPTION: <short imperative description> on line 2
• Receive PROJECT_ROOT as an exported env var pointing to the consumer repo
• Self-detect and exit 0 on already-applied state (idempotent)
• Use atomic write patterns (source scripts/atomic-common.sh for atomic_write, atomic_append_unique, atomic_remove_line) for any file rewrites
• NOT honour any DRY_RUN env var — this framework has no dry-run mode
• Optionally emit MIGRATION_RESULT: no_op_pending on stdout to signal that preconditions are not met and the migration should remain pending (retried on future runs)

State file format

.accelerator/state/migrations-applied contains one migration ID per line, in the order migrations were applied:

0001-rename-tickets-to-work
0002-some-future-migration

.accelerator/state/migrations-skipped contains one migration ID per line for migrations the user has chosen to defer:

0002-some-future-migration

Both files are human-readable and constitute the audit trail. Do not edit them manually unless you are deliberately marking a migration as applied, unapplied, or skipped.

Skip-tracking

Skip a migration to defer it indefinitely:

bash "${CLAUDE_PLUGIN_ROOT}/skills/config/migrate/scripts/run-migrations.sh" --skip <migration-id>

Unskip a previously skipped migration so it becomes pending again:

bash "${CLAUDE_PLUGIN_ROOT}/skills/config/migrate/scripts/run-migrations.sh" --unskip <migration-id>

Skipped migrations never run and do not block other pending migrations. The pre-run banner includes a --skip hint for each pending migration. ACCELERATOR_MIGRATE_FORCE=1 bypasses the dirty-tree pre-flight only; skipped migrations remain skipped even with FORCE.

MIGRATION_RESULT contract

A migration that exits 0 and emits MIGRATION_RESULT: no_op_pending on stdout is treated as a soft deferral — it stays pending and will be retried on future runs. The sentinel line is stripped from user-visible output.

Migrations emitting this sentinel MUST guarantee they performed no destructive operations before the line was emitted. Migrations doing destructive work must either succeed (recorded as applied) or fail non-zero.

Optional interactive contract

Mechanical migrations are the default — they run start-to-finish with no user interaction. A migration that needs to ask the user about ambiguous transformations can opt in to the interactive contract by adding # INTERACTIVE: yes to its header. The framework then drives a per-transformation accept / edit / skip prompt loop, persists each decision durably before any artefact mutation, and resumes from the on-disk session log on subsequent runs.

API reference at a glance

Name	When called	Args	Returns	Side effects
migration_emit_transformations	once at handshake	none (uses harness_emit_transformation to emit each record)	(no return contract)	accumulates extras via harness_extras_set (reset after each emission)
migration_evaluate_predicate	per transformation	TSV line on stdin (use harness_field)	exit 0 = prompt; exit 1 = mechanical; other non-zero = FAIL	none
migration_validate_edit	per edit decision	positional: key path anchor proposed user_value	exit 0 = valid; non-zero (via harness_reject) = invalid	should write error to stderr
migration_apply_decision	per accept/edit, AFTER runner persists; never for skip	positional: key path anchor decision value	exit 0 = success; non-zero = FAIL aborts migration	mutates the artefact at (path, anchor)
migration_session_log_path (optional)	once at handshake	none	path string on stdout	none
migration_verify_applied (optional)	per resumed-accepted/edited key	positional: key path anchor recorded_outcome recorded_proposed [recorded_user_value]	exit 0 = mutation present; non-zero = absent → re-prompt	none
harness_emit_transformation	inside migration_emit_transformations	named: key= path= anchor= proposed= predicate_value= display=	(helper)	emits one TSV transformation; auto-clears extras after
harness_extras_set	inside migration_emit_transformations	positional: key value	(helper)	accumulates one extras pair for the next emission
harness_extras_clear	optional inside migration_emit_transformations	none	(helper)	drops accumulated extras
harness_field	inside migration_evaluate_predicate (TSV on stdin)	positional: field name	value on stdout	none
harness_reject	inside migration_validate_edit	positional: message	(helper, exits non-zero)	prints [interactive] <message> to stderr
harness_run	last line of the migration	none	(drives the protocol loop)	the entire interactive protocol

Header marker

A migration declares the hook by adding # INTERACTIVE: yes somewhere in its first five header-comment lines. Template skeleton:

#!/usr/bin/env bash
# DESCRIPTION: <short imperative>
# INTERACTIVE: yes

set -euo pipefail
source "$CLAUDE_PLUGIN_ROOT/scripts/atomic-common.sh"
source "$CLAUDE_PLUGIN_ROOT/scripts/interactive-harness.sh"

migration_emit_transformations() { ... }
migration_evaluate_predicate()   { ... }
migration_validate_edit()        { ... }
migration_apply_decision()       { ... }

harness_run

Author-facing helpers

Authors NEVER hand-write TSV positional fields, base64-encode display blocks, or hand-write JSON. The helpers exposed by scripts/interactive-harness.sh cover every wire-protocol concern:

• harness_emit_transformation key=K path=P anchor=A proposed=V predicate_value=PV display=$'multi\nline' — emits one transformation. Extras from harness_extras_set are attached then cleared.
• harness_extras_set <key> <value> — accumulate one extras pair. Keys must match ^[a-z][a-z0-9_]*$ and cannot collide with framework-mandatory names (transformation_key, schema_version, outcome, proposed_value, user_value, timestamp). Extras are auto-cleared after each harness_emit_transformation — set them inside the emit loop, not once before it.
• harness_extras_clear — drop all accumulated extras.
• harness_field <name> — inside migration_evaluate_predicate, extract a field by name from the TSV transformation line on stdin.
• harness_reject "<message>" — inside migration_validate_edit, reject the user's input in a uniform format ([interactive] <message>). Always return non-zero from the validator after calling this.

Callback contracts

• migration_evaluate_predicate exits 0 to route the transformation through the prompt loop, exit 1 to apply it mechanically (no prompt), or any other non-zero status to abort the migration with FAIL.
• migration_apply_decision is called once per accept or edit decision, after the runner has durably persisted the JSONL session-log record (write-ahead-log invariant). It is not called for skip. A non-zero exit aborts the migration without ledger append.
• migration_verify_applied (optional) is called on resume before emitting RESUMED_APPLIED. Returning non-zero tells the framework the recorded mutation is absent (e.g. from a partial-apply crash); the framework removes the stale record via DRIFT and re-prompts.

Callbacks may be invoked more than once per run, so they must be deterministic and side-effect-free. A --decisions-file run runs migration_emit_transformations and migration_evaluate_predicate during --list enumeration and again during the dry-apply validation pass before the live run, and runs migration_validate_edit during dry-apply and again at live apply. In particular migration_validate_edit must be a pure function of its arguments — it must not read corpus state that an earlier transformation in the same run could mutate. (If it did, dry-apply could pass against the unmutated corpus while the live run fails validation at a later position after earlier files changed, re-opening the partial-mutation hole dry-apply closes.) A validator that depends on mutable corpus state is unsupported; this is documented rather than enforced.

Runner guarantees (ADR-0037 §§1–4)

• §1 Predicate routing: each transformation is routed to either the prompt loop or the mechanical path based on the predicate's exit code.
• §2 Display elements: every prompt shows the proposed mutation target and value, the source location as path:anchor, and the predicate's evaluated value, plus any author-declared display= content.
• §3 Resumability: every prompted decision is durably persisted to .accelerator/state/migrations-<id>-session.jsonl before the artefact is mutated (write-ahead-log invariant). On re-entry, already-decided keys emit RESUMED_APPLIED / RESUMED_SKIPPED and skip the prompt. A migration completes (and the ID is appended to migrations-applied) only when the harness emits DONE.
• §4 Decision verbs: accept applies the proposed value; edit <value> substitutes a user-provided value (validated by migration_validate_edit); skip records the user's decision but does not mutate the artefact.

Runner-level decisions

• Source-drift: if a recorded record's proposed_value differs from the live emission's, the runner re-prompts and the old record is discarded via atomic_jsonl_remove_by_key. Because the write-ahead-log invariant guarantees persistence before mutation, DRIFT unambiguously means "the migration source changed" — partial-apply crashes resume via RESUMED_APPLIED (or via migration_verify_applied if declared).
• Transformation ordering: emission order from migration_emit_transformations is the canonical iteration order.
• Sticky skip semantics: a transformation skipped on a prior run remains skipped on every subsequent run, even if its predicate would have changed. Users who want to re-prompt a previously-skipped key delete the corresponding session-log line and re-run.

Session log

• Path: .accelerator/state/migrations-<id>-session.jsonl (override via migration_session_log_path). Relative paths are resolved against PROJECT_ROOT.
• One JSON object per line, canonical field order: transformation_key, schema_version: 1, outcome ∈ {accepted, edited, skipped}, proposed_value, optional user_value (only for edited), timestamp, followed by any author-declared extras in receipt order.
• The session log is retained as an audit artefact after full completion; users may delete it manually. The runner refuses to resume from a log with an unknown schema_version and prints a clear recovery instruction.

Worked example

The fixture in scripts/test-fixtures/interactive/doc-example/ ships with the plugin and is exercised by test-migrate-interactive.sh (AC-13). Three transformations are emitted — one ambiguous (prompted), one resolved (mechanical), one ambiguous with an empty-value validator. With the scripted decisions edit (empty), edit 0123-renamed, skip, the user-facing transcript is:

Session log: <SANDBOX>/.accelerator/state/migrations-0099-doc-example-session.jsonl  (resume from this file by re-running /accelerator:migrate)

── Transformation 1 ────────────────────────
Proposed:  0034-foo
Source:    meta/work/example-A.md:14
Predicate: ambiguous

Proposed value: 0034-foo
Surrounding prose: the linkage paragraph

[accept | edit <new-value> | skip] >
[interactive] empty value not allowed
── Transformation 1 ────────────────────────
Proposed:  0034-foo
Source:    meta/work/example-A.md:14
Predicate: ambiguous

Proposed value: 0034-foo
Surrounding prose: the linkage paragraph

[accept | edit <new-value> | skip] >
── Transformation 2 ────────────────────────
Proposed:  0007-baz
Source:    meta/work/example-C.md:21
Predicate: ambiguous

Proposed value: 0007-baz
Surrounding prose: the paragraph the author wants to revise

>

And the on-disk session log (with timestamps redacted) is:

{"transformation_key":"link-A","schema_version":1,"outcome":"edited","proposed_value":"0034-foo","user_value":"0123-renamed","timestamp":"<REDACTED>","band":"ambiguous","prose":"the linkage paragraph"}
{"transformation_key":"link-C","schema_version":1,"outcome":"skipped","proposed_value":"0007-baz","timestamp":"<REDACTED>"}

The middle transformation (link-B, band resolved) routed through the mechanical path — predicate exited 1, the harness emitted MECHANICAL_APPLIED, no record was persisted, the artefact was mutated unconditionally.

Answering prompts as an agent (the invoker contract)

When /accelerator:migrate runs without a human at a terminal, an agent answers the interactive prompts with a decisions file, following the four steps list → decide → write → resume:

In practice the agent first runs the migration and hits the structured stall, which names the exact decisions-file path — including the migration <id> — (.accelerator/state/migrations-<id>-decisions.txt) and a copy-pasteable resume command. --list is then the step that reveals the proposed values (which the stall does not show), so the realistic order is run → stall (learn the <id> and path) → --list (see proposed values) → write → resume. The <id> comes from the stall/preview, not from --list output.

1. list — bash …/run-migrations.sh --list dry-emits every pending interactive transformation, one tab-delimited line each, without mutating the corpus:

   <position>\t<key>\t<proposed>\t<path>:<field>
   

   (Fields are separated by a literal TAB, shown as \t here; the same column vocabulary — <path>:<field> — is used in --help.) Proposed values are revealed only here, so list before deciding. When parsing, skip lines beginning with #: with more than one pending interactive migration the output is segmented by a # migration <id> header and <position> restarts at 1 per migration. Resume each # migration <id> section separately with its own decisions file (a single multi-migration decisions file is not yet supported; --list prints a stderr note when more than one is pending).

2. decide — choose a verb per transformation: accept, skip, or edit <value>.

3. write — write one verb per line to a decisions file, matched by emission order (line i answers list position i; skipped/mechanical transformations consume no line). Create the file yourself at a path that exists and is readable — the stall message points at .accelerator/state/migrations-<id>-decisions.txt; do not overwrite existing migrations-<id>-* state files. For example:

   printf 'accept\nskip\nedit work-item:0100\n' \
     > .accelerator/state/migrations-<id>-decisions.txt
   

4. resume — re-run with --decisions-file <path> (or the equivalent ACCELERATOR_MIGRATE_DECISIONS_FILE env var, discoverable via --help). The stall's copy-pasteable command is exactly this bare form — no ACCELERATOR_MIGRATE_FORCE=1 is needed in the normal case. A partial interactive run dirties the tree only with files this run owns (the interactive session log, plus any frontmatter already written), and the guarded resume shipped in 0119 lets the re-run proceed over that own output without FORCE when the base revision is unchanged, printing a one-line affordance listing the owned paths being resumed over. FORCE is required only when the pre-flight refuses — i.e. the tree carries dirt this run does not own (foreign changes, or you have committed since the partial run so the base revision moved). In that case, re-run once without FORCE first to read the refusal / in-flight-session guidance, confirm via jj status/git status that the dirty paths really are this migration's own, and only then add ACCELERATOR_MIGRATE_FORCE=1. (The guarded-resume behaviour is owned by meta/work/0119-resume-safe-partial-migration-failure.md, now landed.)

The driver validates the decisions file up front (a no-mutation dry-apply pass) and fails closed: an unknown verb, a count mismatch (too few or too many verbs), or a rejected edit value that no following line corrects exits non-zero, names the offending position, and leaves the corpus unmutated — validation never partially applies. (The dry-apply pass mirrors the live run, so a migration_validate_edit rejection followed by a corrected value on the next line is accepted just as it would apply.) Once validation passes and the live apply begins, transformations are applied in order without rollback, so an apply-time failure can leave a partial corpus; recover with VCS revert, then re-run — 0119's guarded resume replays the run's own partial output without FORCE when the base revision is unchanged.

When no decision input is available at all, the run emits the structured stall (MIGRATION STALLED: no decision input available) and stops without further mutation — see meta/work/0116-structured-stall-on-no-decision-input.md.

This contract is scoped to a single pending interactive migration (the realistic case); decisions files are consumed per migration.

Executing the migration

Invoke via Bash:

bash "${CLAUDE_PLUGIN_ROOT}/skills/config/migrate/scripts/run-migrations.sh"

The driver script resolves PROJECT_ROOT automatically from the current working directory. Run it from within the consumer repository. Run /accelerator:migrate from a single shell at a time; it does not acquire a lock.

Cross-references

• meta/decisions/ADR-0023-meta-directory-migration-framework.md — framework design rationale
• meta/decisions/ADR-0037-optional-interactive-contract-supplement-to-adr-0023.md — optional interactive contract
• meta/decisions/ADR-0038-interactive-validation-parameters-for-unified-schema-linkage-migration.md — first consumer's parameterisation
• meta/work/0116-structured-stall-on-no-decision-input.md — the structured stall (MIGRATION STALLED: no decision input available) the invoker contract defers to when no decision input is available
• skills/config/init/SKILL.md — init bootstraps fresh repos; migrate upgrades existing ones
• skills/config/configure/SKILL.md — configuration reference