Exécutez n'importe quel Skill dans Manus
en un clic

Exécutez n'importe quel Skill dans Manus en un clic

aws-network-monitoring

Étoiles2 048

Forks190

Mis à jour20 juillet 2026 à 13:20

Installs, configures, and troubleshoots Network Flow Monitor agents on EC2 instances to monitor network path health. Covers agent installation, IAM permissions, monitoring network paths, and troubleshooting agents reporting no metrics, HTTP 403 errors, or connectivity failures.

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Exécuter dans Manus

Source

aws

aws/agent-toolkit-for-aws

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Exécuter dans Manus

Métiers associésSOC

Basé sur la classification professionnelle SOC

Administrateurs de réseaux et de systèmes informatiquesProfessions informatiques et mathématiques·SOC 15-1244

Explorateur de fichiers

4 fichiers

SKILL.md

readonly

name	aws-network-monitoring
description	Installs, configures, and troubleshoots Network Flow Monitor agents on EC2 instances to monitor network path health. Covers agent installation, IAM permissions, monitoring network paths, and troubleshooting agents reporting no metrics, HTTP 403 errors, or connectivity failures.
version	1

AWS Network Monitoring

Overview

Domain expertise for installing and configuring Amazon CloudWatch Network Flow Monitor agents on EC2 instances. Covers IAM permission setup, agent installation via SSM Distributor or command-line install, agent activation, verification, and troubleshooting.

Network Flow Monitor agents are lightweight software that publish performance metrics (latency, packet loss) to the Network Flow Monitor backend, enabling monitoring of network path health between workloads.

Works best with the AWS MCP server — enables running SSM commands, attaching IAM policies, and validating agent status directly. All guidance also works with standard AWS CLI access.

Routing

User need	Action
Installing Network Flow Monitor agents on EC2	Read agent-install-ec2.md
Configuring IAM for Network Flow Monitor agents	Read agent-permissions.md
Troubleshooting Network Flow Monitor agents (403, no metrics, connectivity)	Read troubleshooting.md
Spans multiple areas	Read the most specific reference first, then consult others as needed

Files

File	Content
agent-install-ec2.md	End-to-end Network Flow Monitor agent installation via SSM Distributor, activation, verification
agent-permissions.md	IAM policy setup for Network Flow Monitor agent metric publishing
troubleshooting.md	Error → cause → fix for Network Flow Monitor agent issues (HTTP 403, missing metrics, connectivity)

Supported versions

For supported Linux distributions, kernel versions, and architectures, see the AWS documentation. Windows is not supported.

Security Considerations

Least-privilege IAM: Attach only CloudWatchNetworkFlowMonitorAgentPublishPolicy for publishing metrics and AmazonSSMManagedInstanceCore for SSM management. Do not use *FullAccess policies.
Private subnets: When the instance is in a private subnet, prefer VPC endpoints for SSM (com.amazonaws.<region>.ssm, .ssmmessages, .ec2messages) over a NAT gateway to keep traffic on the AWS network.
Credential storage: Never embed AWS credentials on the instance; the publish policy MUST be attached to the instance role, not configured as static keys.
Audit trail: Ensure CloudTrail is enabled in the account so SSM SendCommand invocations and IAM AttachRolePolicy actions performed during agent setup are logged for security investigations.
References: CloudWatch Network Flow Monitor security, IAM best practices

Plus depuis ce dépôt

même dépôt

directconnect

aws/agent-toolkit-for-aws

Configures AWS Direct Connect: choosing a connection model (dedicated, hosted, or a link aggregation group) and completing the cross connect; creating private, public, and transit virtual interfaces and bringing up BGP; reaching many VPCs through a Direct Connect gateway including cross-account transit gateway associations; encrypting traffic with MACsec or a private IP Site-to-Site VPN; making the connection resilient and tuning failover; managing link aggregation groups; SiteLink; and migrating from a virtual private gateway to a transit gateway. Use when the user wants a private, consistent network link between a data center and AWS, or operates an existing Direct Connect setup and needs to extend, encrypt, or harden it. Routes to the right per-task procedure in references. Do NOT use for transit gateway route tables and attachments (transitgateway skill), Site-to-Site VPN without Direct Connect (sitetositevpn skill), or Route 53 DNS routing (route53 skill).

2026-07-212.0k

route53

aws/agent-toolkit-for-aws

Configures Amazon Route 53 DNS: public and private records, traffic-steering routing policies, health checks, DNS Firewall, Route 53 Profiles, VPC Resolver (also known as Route 53 Resolver) for hybrid and Outposts networks, and Global Resolver. Applicable when the customer wants to point a hostname at a target, split or fail over traffic across endpoints, monitor an endpoint, block malicious domains, centralize DNS across accounts, or resolve private DNS across a hybrid network. Routes to the right per-task procedure in references. Does not cover CloudFront-specific setup (see the route53-cloudfront skill) or non-DNS networking.

2026-07-212.0k

shieldadvanced

aws/agent-toolkit-for-aws

Configures AWS Shield Advanced for enhanced Distributed Denial of Service (DDoS) protection: subscribing accounts and adding resource protections, enabling automatic application layer (layer 7) mitigation through AWS WAF, configuring health-based detection with Route 53 health checks, setting up Shield Response Team (SRT) access and proactive engagement, reviewing DDoS events and requesting cost protection credits, and aggregating resources into protection groups. Applicable when the user wants stronger DDoS protection for internet-facing resources (CloudFront, Application or Network Load Balancers, Elastic IP addresses, Global Accelerator, or Route 53 hosted zones), wants expert help during an attack, or wants to recover attack-driven scaling charges. Routes to the right per-task procedure in references. Not applicable for authoring AWS WAF rules (waf skill), creating Route 53 health checks (route53 skill), or org-wide Shield Advanced rollout with Firewall Manager (firewallmanager skill).

2026-07-212.0k

transitgateway

aws/agent-toolkit-for-aws

Configures AWS Transit Gateway: creating a hub and attaching VPCs, segmenting traffic with route tables, centralizing egress and inspection through a hub (appliances or a Gateway Load Balancer endpoint), forcing east-west traffic between VPCs through AWS Network Firewall, connecting on-premises networks over the transit-gateway side of a Site-to-Site VPN or Direct Connect attachment (including ECMP to aggregate bandwidth across multiple VPN tunnels), peering transit gateways across Regions, migrating from a VPC peering mesh, and routing IP multicast. Applicable when connecting many VPCs through one router, isolating environments, forcing VPC-to-VPC traffic through a central Network Firewall, reaching on-premises over the hub, linking Regions, or moving off a peering mesh. Not applicable for single-VPC routing, VPC peering between two VPCs (vpcpeering skill), Direct Connect gateway or virtual interface setup (directconnect skill), or Route 53 DNS work.

2026-07-212.0k

waf

aws/agent-toolkit-for-aws

Configures AWS WAF to filter web traffic: creating web access control lists (web ACLs) on CloudFront, Application Load Balancers, API Gateway, and AppSync; AWS Managed Rules tuned in Count mode; rate-based rules for HTTP floods; IP set and geographic match rules; Bot Control (Common and Targeted); turning bot labels into a confidence signal; stripping spoofed inbound x-amzn-waf-* headers; recovering the real client IP behind a CDN; Fraud Control (account takeover and account creation fraud prevention); and logging and request sampling. Use when the user wants to protect a web application or API from common exploits, bots, credential stuffing, fake-account creation, or HTTP floods at the application layer (layer 7). Routes to the right per-task procedure in references. Do NOT use for L3/L4 DDoS protection (shieldadvanced skill), multi-account WAF rollout (firewallmanager skill), CloudFront configuration (cloudfront skill), or Route 53 health checks or records (route53 skill).

2026-07-212.0k

aws-observability

aws/agent-toolkit-for-aws

Builds, configures, debugs, and optimizes AWS observability with CloudWatch (Log Insights, Metrics, Alarms, Dashboards, EMF), X-Ray, CloudTrail, and ADOT (AWS Distro for OpenTelemetry), AND enables/onboards services to Application Signals using ADOT auto-instrumentation SDKs. Covers Log Insights queries, alarms (metric, composite, anomaly), dashboards, custom metrics/EMF, X-Ray tracing and sampling, ADOT collector config, CloudTrail auditing, and end-to-end Application Signals enablement via ADOT SDKs (CloudWatch Observability EKS add-on, CloudWatch Agent IAM, OTLP endpoints, ServiceEvents, Dynamic Instrumentation), breakpoint and snapshot in Dynamic Instrumentation, live data capture in running service, debug without redeploying. Applies to CloudWatch, alarms, dashboards, EMF, X-Ray, traces, CloudTrail, ADOT, monitoring, synthetics/canaries, OR enabling/onboarding/instrumenting a service for Application Signals. Not for app logging or security threat detection.

2026-07-202.0k

name	aws-network-monitoring
description	Installs, configures, and troubleshoots Network Flow Monitor agents on EC2 instances to monitor network path health. Covers agent installation, IAM permissions, monitoring network paths, and troubleshooting agents reporting no metrics, HTTP 403 errors, or connectivity failures.
version	1

AWS Network Monitoring

Overview

Works best with the AWS MCP server — enables running SSM commands, attaching IAM policies, and validating agent status directly. All guidance also works with standard AWS CLI access.

Routing

User need	Action
Installing Network Flow Monitor agents on EC2	Read agent-install-ec2.md
Configuring IAM for Network Flow Monitor agents	Read agent-permissions.md
Troubleshooting Network Flow Monitor agents (403, no metrics, connectivity)	Read troubleshooting.md
Spans multiple areas	Read the most specific reference first, then consult others as needed

Files

File	Content
agent-install-ec2.md	End-to-end Network Flow Monitor agent installation via SSM Distributor, activation, verification
agent-permissions.md	IAM policy setup for Network Flow Monitor agent metric publishing
troubleshooting.md	Error → cause → fix for Network Flow Monitor agent issues (HTTP 403, missing metrics, connectivity)

Supported versions

For supported Linux distributions, kernel versions, and architectures, see the AWS documentation. Windows is not supported.

Security Considerations

Least-privilege IAM: Attach only CloudWatchNetworkFlowMonitorAgentPublishPolicy for publishing metrics and AmazonSSMManagedInstanceCore for SSM management. Do not use *FullAccess policies.
Private subnets: When the instance is in a private subnet, prefer VPC endpoints for SSM (com.amazonaws.<region>.ssm, .ssmmessages, .ec2messages) over a NAT gateway to keep traffic on the AWS network.
Credential storage: Never embed AWS credentials on the instance; the publish policy MUST be attached to the instance role, not configured as static keys.
Audit trail: Ensure CloudTrail is enabled in the account so SSM SendCommand invocations and IAM AttachRolePolicy actions performed during agent setup are logged for security investigations.
References: CloudWatch Network Flow Monitor security, IAM best practices