Exécutez n'importe quel Skill dans Manus
en un clic

Exécutez n'importe quel Skill dans Manus en un clic

bwoc-messaging

Étoiles0

Forks0

Mis à jour28 juin 2026 à 07:54

Read and send messages on a BWOC agent's inbox from Claude Code — inspect an agent's (or the whole fleet's) inbox, count or tail new envelopes, acknowledge/clear a backlog, append a message, and read daemon logs. Use when the user wants to see what work is queued for an agent, triage a backed-up inbox, or hand off a message. Wraps the `bwoc` CLI (shell-out, no server).

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Exécuter dans Manus

Source

bemindlabs

bemindlabs/bwoc-plugin-claude

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Exécuter dans Manus

Métiers associésSOC

Basé sur la classification professionnelle SOC

Autres occupations informatiquesProfessions informatiques et mathématiques·SOC 15-1299

SKILL.md

readonly

name	bwoc-messaging
description	Read and send messages on a BWOC agent's inbox from Claude Code — inspect an agent's (or the whole fleet's) inbox, count or tail new envelopes, acknowledge/clear a backlog, append a message, and read daemon logs. Use when the user wants to see what work is queued for an agent, triage a backed-up inbox, or hand off a message. Wraps the `bwoc` CLI (shell-out, no server).

BWOC Messaging & Inbox

This skill teaches when and how to work with the BWOC inbox transport from Claude Code: reading what is queued for an agent, sending messages, and triaging a backlog. Every capability is a thin wrapper over the bwoc CLI. Discover exact flags with bwoc <verb> --help, and quote user-supplied values.

When to use

"What's queued for agent X?" / "is anyone backed up?" → bwoc inbox <agent>, inbox --all.
"How many unread does X have?" → bwoc inbox <agent> --count.
"Send / hand off a message" → bwoc send.
"What did X's daemon say?" → bwoc log <agent>.
"Clear the backlog after I've read it" → bwoc inbox <agent> --clear (mutating).

Reading inboxes (read-only)

bwoc inbox <agent>             # print one agent's inbox (.bwoc/inbox.jsonl)
bwoc inbox --all               # every agent's inbox, each under a header
bwoc inbox <agent> --limit 20  # only the last N messages
bwoc inbox <agent> --count     # just the envelope count (one integer; pairs with --json)
bwoc inbox <agent> --json      # structured envelopes
bwoc inbox <agent> --watch     # tail mode — block and print new envelopes (Ctrl-C to stop)

--watch blocks; surface it to the user rather than running it inside the non-interactive Bash tool. --all refuses --clear/--watch.

Sending (mutating)

bwoc send <agent> "<message>"            # append to the agent's inbox; fire-and-forget
bwoc send <agent> "<message>" --from <agent>      # agent → agent sender attribution
bwoc send <agent> --file <FILE>          # send file contents instead of inline text

Quote the message so multi-word values stay one argument. Optional: --reply-to <messageId>, --no-wakeup.

Triaging a backlog

bwoc inbox <agent> --limit 50      # read what piled up first
# ...act on / summarize the messages...
bwoc inbox <agent> --clear         # acknowledge + truncate (asks to confirm)
bwoc inbox <agent> --clear --yes   # required in non-TTY; skips the confirmation

Daemon logs (read-only)

bwoc log <agent>               # tail the agent's daemon log (.bwoc/agent.log — stderr)

Safety

inbox reads and log are read-only. send and inbox --clear are mutating — --clear is destructive (it deletes messages), so read them first and confirm intent.
Never --clear an inbox you have not actually surfaced to the user.
Target a specific workspace with --workspace <path> (or BWOC_WORKSPACE).

Plus depuis ce dépôt

même dépôt

bwoc-council

bemindlabs/bwoc-plugin-claude

Run formal multi-agent decisions and objective tracking on a BWOC workspace from Claude Code — open a council decision (propose), discuss, vote, and resolve by the plugin's voting model + quorum, plus list/track/report OKR key results. Use when a team needs a governed decision recorded (not just a chat) or wants to track objectives. Wraps the `bwoc` CLI; the live paths need a council/okr-kind plugin installed.

2026-06-280

bwoc-health

bemindlabs/bwoc-plugin-claude

Diagnose the health of a BWOC workspace and its agent fleet from Claude Code. Use when the user wants to check fleet/workspace health, find a stuck or unhealthy agent, see which agents are actually running, read an agent's daemon log, inspect trust profiles, or triage before launching work. Read-only diagnostics that wrap the `bwoc` CLI (shell-out, no server).

2026-06-280

bwoc-knowledge

bemindlabs/bwoc-plugin-claude

Read and write a BWOC workspace's shared knowledge from Claude Code — deep-memory plus the dated document kinds (notes, retrospectives, research, and custom doc kinds). Use when the user wants to recall prior decisions, capture a note or retro after finishing work, file a research doc, or browse what the workspace already knows. Wraps the `bwoc` CLI (shell-out, no server).

2026-06-280

bwoc-lifecycle

bemindlabs/bwoc-plugin-claude

Manage the lifecycle of BWOC agents from Claude Code — incarnate (new), pause/resume (stop/start), supervise the daemon, inspect the base-project binding (debase), and retire. Use when the user wants to add a new agent, pause or reactivate one, keep a daemon alive, or remove an agent from the workspace. Wraps the `bwoc` CLI (shell-out, no server); the mutating verbs follow the workspace's own gates.

2026-06-280

bwoc-quality

bemindlabs/bwoc-plugin-claude

Run a BWOC workspace's verification gates from Claude Code — backend-neutrality audit of agents (bwoc check), workspace structural validation, registry/orphan pruning, and audit-kind plugin findings. Use after editing or adding an agent, before a release, or when the user wants to confirm the workspace is consistent. Read-mostly; wraps the `bwoc` CLI (shell-out, no server).

2026-06-280

bwoc-fleet

bemindlabs/bwoc-plugin-claude

Coordinate the BWOC agent fleet from Claude Code. Use when the user wants to list/inspect BWOC agents, delegate or send work to a fleet member, run a headless task on an agent, manage Saṅgha teams or their shared task list, or read workspace deep-memory. Wraps the `bwoc` CLI (shell-out, no server).

2026-06-080

name	bwoc-messaging
description	Read and send messages on a BWOC agent's inbox from Claude Code — inspect an agent's (or the whole fleet's) inbox, count or tail new envelopes, acknowledge/clear a backlog, append a message, and read daemon logs. Use when the user wants to see what work is queued for an agent, triage a backed-up inbox, or hand off a message. Wraps the `bwoc` CLI (shell-out, no server).

BWOC Messaging & Inbox

When to use

"What's queued for agent X?" / "is anyone backed up?" → bwoc inbox <agent>, inbox --all.
"How many unread does X have?" → bwoc inbox <agent> --count.
"Send / hand off a message" → bwoc send.
"What did X's daemon say?" → bwoc log <agent>.
"Clear the backlog after I've read it" → bwoc inbox <agent> --clear (mutating).

Reading inboxes (read-only)

bwoc inbox <agent>             # print one agent's inbox (.bwoc/inbox.jsonl)
bwoc inbox --all               # every agent's inbox, each under a header
bwoc inbox <agent> --limit 20  # only the last N messages
bwoc inbox <agent> --count     # just the envelope count (one integer; pairs with --json)
bwoc inbox <agent> --json      # structured envelopes
bwoc inbox <agent> --watch     # tail mode — block and print new envelopes (Ctrl-C to stop)

--watch blocks; surface it to the user rather than running it inside the non-interactive Bash tool. --all refuses --clear/--watch.

Sending (mutating)

bwoc send <agent> "<message>"            # append to the agent's inbox; fire-and-forget
bwoc send <agent> "<message>" --from <agent>      # agent → agent sender attribution
bwoc send <agent> --file <FILE>          # send file contents instead of inline text

Quote the message so multi-word values stay one argument. Optional: --reply-to <messageId>, --no-wakeup.

Triaging a backlog

bwoc inbox <agent> --limit 50      # read what piled up first
# ...act on / summarize the messages...
bwoc inbox <agent> --clear         # acknowledge + truncate (asks to confirm)
bwoc inbox <agent> --clear --yes   # required in non-TTY; skips the confirmation

Daemon logs (read-only)

bwoc log <agent>               # tail the agent's daemon log (.bwoc/agent.log — stderr)

Safety

inbox reads and log are read-only. send and inbox --clear are mutating — --clear is destructive (it deletes messages), so read them first and confirm intent.
Never --clear an inbox you have not actually surfaced to the user.
Target a specific workspace with --workspace <path> (or BWOC_WORKSPACE).