Design and create Huawei Cloud CodeArts Req (ProjectMan) projects — parse intent, discover, validate naming, create or reuse the project, and configure its basic design (description, members) using hcloud CLI, with a documented manual fallback.
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Une commande directe contourne le prompt de vérification. Examinez la source avant de l'exécuter.
Design and create Huawei Cloud CodeArts Req (ProjectMan) projects — parse intent, discover, validate naming, create or reuse the project, and configure its basic design (description, members) using hcloud CLI, with a documented manual fallback.
Design and create a Huawei Cloud CodeArts Req (ProjectMan) project — resolve inputs, discover existing projects, validate the project name, create (or reuse) the project, and configure its basic design (description, enterprise project, members) — using hcloud CLI (KooCLI) as the primary mechanism, with a documented manual console fallback when CLI creation is not available for the tenant.
Target: a new (or reused) CodeArts Req project, fully identified by project_id
Mechanism: ProjectMan v4 REST API called through hcloud CLI, CreateProjectV4 (or manual console creation as fallback) + UpdateProjectV4 + AddMemberV4
Storage: none (this skill does not touch code repositories, artifacts, or backups)
Topology: single-region project creation and configuration
When to use this skill
Creating a new CodeArts Req project (Scrum, Kanban/xboard, Normal/basic, or Phoenix type)
Validating whether a desired project name is available before creating it
Reusing an existing project instead of creating a duplicate
Updating a project's name or description after creation (design phase)
Adding members and roles to a project during its design/setup phase
Auditing what CodeArts Req projects exist in a tenant/region
When not to use this skill
Creating, cloning, or importing CodeArts Repo repositories (use a dedicated CodeArts Repo skill)
Configuring CodeArts Build, Check, Deploy, Pipeline, or Release (out of scope; use dedicated skills)
Managing work items, iterations, sprints, or Wiki content inside an existing project (use a CodeArts Req work-item-management skill)
Enterprise Project (EPS) creation itself — enterprise_id here only associates an existing enterprise project; creating one is a separate IAM/EPS operation
When hcloud CLI is not available and cannot be installed, and the manual console path is also not permitted
Required inputs
project_name
project_type (scrum, xboard, basic, or phoenix)
source_region
approval_owner
Optional inputs
description
enterprise_id (existing enterprise project to bind the project to)
template_id (an existing custom project template id, if the tenant has one configured)
members_to_add (list of {user_id, domain_id, role_id})
existing_project_reuse_allowed (boolean; default false — never silently reuse without confirming)
Required MCPs
None. All ProjectMan (CodeArts Req) operations are performed via hcloud CLI.
Optional MCPs
huaweicloud-ticket (only to open a support ticket if the CreateProjectV4 capability probe fails and manual escalation is desired)
Tool selection policy
Use hcloud CLI for ALL ProjectMan (CodeArts Req) operations: discovery, name validation, creation, update, member management
Never use huaweicloud-deploy / GenerateTerraformFromArchitecture to create CodeArts projects — CodeArts Req is not a Terraform-managed resource in that MCP
Never invent a hcloud CodeArts ... command; the KooCLI service name for this API family is ProjectMan, not CodeArts
Never assume CreateProjectV4 is available without probing it first for the active hcloud CLI installation and tenant (see Capability gap handling)
Use huaweicloud-ticket only for support escalation, never to substitute a missing capability with an invented command
Safety and approval gates
Project creation (CreateProjectV4, or the manual console equivalent) requires explicit approval
Reusing an existing project instead of creating a new one requires explicit confirmation from the approval owner
Adding a member to the project (AddMemberV4) requires explicit approval
Deleting a project (DeleteProjectV4) is out of scope for this skill's normal workflow; only perform it as an explicit, separately approved rollback action (see # Rollback below), never as part of normal design/creation
Rules
CodeArts Req (ProjectMan) is exposed through hcloud CLI under the service name ProjectMan; there is no CodeArts service name and no dedicated CodeArts MCP. [VERIFIED_FROM_PUBLIC_API_DOCS]
CreateProjectV4 (POST /v4/project, note the singular path) exists in the officially released Huawei Cloud ProjectMan SDK source code, with request body fields project_name (required), project_type (required: scrum, xboard, basic, phoenix), and optional description, source, enterprise_id, template_id. It is not listed in the public CodeArts Req API Reference "Project Information" index at the time of this verification. Treat its availability through KooCLI as a capability that MUST be probed live before use, not assumed. [VERIFIED_FROM_SDK_SOURCE] [NOT_IN_PUBLIC_DOCS]
If the CreateProjectV4 probe fails (operation not present for the installed KooCLI version, or the API call is rejected/forbidden), fall back to the documented manual console procedure: CodeArts console → "Create Project" → select type → enter the validated name. Do not invent an alternative CLI command to work around the gap. [INFERRED]
ProjectMan publishes its own regional endpoints, independent from other Huawei Cloud services. Confirmed regions: cn-north-4, cn-north-1, cn-east-2, cn-south-1, cn-southwest-2, cn-east-3, ap-southeast-3, la-north-2, sa-brazil-1. Do not assume a region used for another service (for example ap-southeast-1) is also valid for ProjectMan; verify against this list or a fresh region/endpoint lookup first. [VERIFIED_FROM_SDK_SOURCE] [REGION_DEPENDENT]
DISCOVER BEFORE CREATE: always run CheckProjectNameV4 and ListProjectsV4 (filtered by search) before creating a project. Never hardcode project_id, project_num_id, domain_id, user_id, template_id, or enterprise_id; resolve them via read operations. [VERIFIED_FROM_PUBLIC_API_DOCS]
Project names are unique at the platform level, not only within the caller's account; CheckProjectNameV4 returning exist: true does not necessarily mean the project belongs to the current tenant. [INFERRED]
There is no discovered operation to list "project creation templates" globally; ListTemplates requires an existing project_id and returns work-item templates for that project, not templates usable in CreateProjectV4.template_id. Treat template_id as optional and only use it if the approval owner supplies a known, already-verified value. [VERIFIED_FROM_SDK_SOURCE] [INFERRED]
VERIFY AFTER EVERY WRITE: CreateProjectV4 (or manual creation) must be followed by ListProjectsV4/ShowProjectInfoV4; UpdateProjectV4 must be followed by ShowProjectInfoV4; AddMemberV4 must be followed by ListProjectMembersV4. [VERIFIED_FROM_PUBLIC_API_DOCS]
Every write operation (CreateProjectV4, UpdateProjectV4, AddMemberV4, DeleteProjectV4) requires explicit approval before execution. [INFERRED]
This skill's scope ends at project design/creation and basic configuration (name, description, enterprise project, members). Do not extend the workflow into CodeArts Repo, Build, Check, Deploy, Pipeline, or Release; those require separate skills. [INFERRED] (explicit scope boundary requested when this skill was authored)
Never include secrets (AK, SK, tokens, passwords) in commands, examples, files, or logs; use the credentials already configured in the local hcloud profile. [INFERRED]
This skill was authored and verified from the official public CodeArts Req API Reference and the official released ProjectMan SDK source code. It was not executed against a live hcloud CLI installation or a live Huawei Cloud tenant (no cloud network access / credentials were available at authoring time). The first real use of this skill in any environment MUST start with the live capability probe in Step 4 before relying on CreateProjectV4. [NOT_LIVE_TESTED]
Prerequisites
Tool or resource
Required
Purpose
Verification
hcloud CLI (KooCLI)
Yes
All ProjectMan operations
hcloud version
Huawei Cloud authentication (AK/SK)
Yes
API access
hcloud configure show --cli-profile=default
Target region (ProjectMan-supported)
Yes
Project region/endpoint
See Rule 4 region list
CodeArts Req project-creation permission
Yes
Ability to create a project
Confirmed only by a successful create attempt or console check
Verification: Confirm all required fields are present and project_type is one of scrum, xboard, basic, phoenix.
Expected result: Complete intent object.
Failure action: If critical information is missing or project_type is invalid, STOP and request clarification. Do not invent values or guess a project type.
Evidence artifact: artifacts/codearts-intent.json
Extract:
project_name
project_type
source_region
description
enterprise_id
template_id
members_to_add
existing_project_reuse_allowed
approval_owner
STEP 2 — DISCOVER AUTHENTICATION, REGION AND SERVICE
Classification: ASSISTED
Objective: Verify hcloud CLI is installed and configured, confirm the region is valid for ProjectMan, and confirm the ProjectMan service responds.
Inputs: source_region from intent.
Preconditions: hcloud CLI installed (see # Prerequisites above).
Commands (read-only):
hcloud version
hcloud configure show --cli-profile=default
hcloud ProjectMan --help
hcloud ProjectMan ListProjectsV4 --cli-region=<SOURCE_REGION> --offset=0 --limit=1
Approval requirement: None.
Verification: Confirm hcloud version returns a version, the profile shows a region and AK configured, ProjectMan --help lists operations, and ListProjectsV4 returns a response (even an empty list) rather than an auth/region error.
Expected result: Authentication valid, region accepted by ProjectMan, service reachable.
Failure action: STOP. Report authentication, region, or connectivity error. If the region is rejected, cross-check against the confirmed region list in Rule 4 before assuming a transient failure.
Verification: Record exist: true|false. If true and a matching project is visible in the current tenant's ListProjectsV4 results, present the reuse decision to the approval owner instead of creating a duplicate.
Expected result: Name-availability decision made; if reuse is chosen, project_id resolved from ListProjectsV4 and the workflow jumps to Step 8 (skip creation).
Failure action: If exist: true but no matching project appears in this tenant's list, STOP and inform the approval owner the name is taken platform-wide by another tenant; request a different name. Do not guess a new name automatically.
Objective: Determine, for the installed KooCLI version and the authenticated tenant, whether CreateProjectV4 is actually available before relying on it (see Rule 2).
Inputs: None beyond an authenticated hcloud profile.
Preconditions: Step 2 completed successfully.
Commands (read-only / non-mutating):
hcloud ProjectMan CreateProjectV4 --help
Approval requirement: None (this is a capability probe, not an execution).
Verification:
If the command prints parameter help for CreateProjectV4 (accepting project_name, project_type, etc.): classify capability as AVAILABLE.
If the command errors with "operation not found" / "unknown operation" or equivalent: classify capability as NOT_AVAILABLE_IN_CLI.
If help is shown but a later real call in Step 6 is rejected with a permissions/authorization error: classify capability as NOT_AVAILABLE_FOR_TENANT.
Expected result: A documented capability classification that determines whether Step 6 uses Path A (CLI) or Path B (manual console).
Failure action: If the probe cannot be run at all (for example, hcloud ProjectMan --help in Step 2 did not list CreateProjectV4 among available operations), classify as NOT_AVAILABLE_IN_CLI and proceed directly to planning the manual fallback. Do not retry with a different, invented operation name.
Add --enterprise_id="<ENTERPRISE_ID>" and/or --template_id=<TEMPLATE_ID> only if the approval owner supplied verified values (Rule 7).
If the call fails with an authorization/forbidden error despite the probe succeeding: reclassify capability as NOT_AVAILABLE_FOR_TENANT, update the probe artifact, and fall back to Path B in the same step (do not silently retry).
If creating and creation_path: MANUAL_CONSOLE (capability probe was NOT_AVAILABLE_IN_CLI or NOT_AVAILABLE_FOR_TENANT):
Approval requirement: EXPLICIT. Request approval before creation.
Manual procedure (present to a human operator; this skill does not automate console clicks):
Sign in to the Huawei Cloud console and open CodeArts.
Click "Create Project".
Select the project type equivalent to <PROJECT_TYPE> (Scrum, Kanban, or Normal).
Enter <PROJECT_NAME> (already validated as available in Step 3).
Confirm creation.
Expected result: Project created (or reuse confirmed), pending ID resolution in Step 7.
Failure action: STOP. Preserve error evidence. Do not retry with a different or invented command; if Path A fails for a reason other than authorization, report and await a decision instead of auto-falling back.
Verification: Confirm exactly one project matches <PROJECT_NAME> (reject ambiguous multiple matches — if the name was reused across regions or renamed concurrently, escalate), and that project_type and description match the plan.
Expected result: project_id resolved and validated.
Failure action: STOP. If zero matches, the manual creation (Path B) may not have completed; ask the human operator to confirm. If multiple matches, present all and let the approval owner pick.
Verification: project_name, description, and project_type match the plan; every member from members_to_add appears in ListProjectMembersV4 with the expected role.
When a capability required for CodeArts project design/creation is not available or not confirmed:
Document the gap with Gap ID, phase, and impact (see the known gaps listed below)
Classify the gap: critical path or optional
Evaluate alternatives:
Can the step be performed via hcloud CLI? → USE_HCLOUD_CLI
Can it only be done manually in the console? → USE_MANUAL_CONSOLE_FALLBACK
Can an existing MCP tool accomplish the task? → USE_EXISTING_TOOL
Is a new MCP needed? → CREATE_NEW_MCP (last resort; not applicable to this skill's known gaps)
Never auto-activate a generated MCP or invent an undocumented command as a workaround
Update skill status if critical gaps remain
Known capability gaps:
GAP-CODEARTS-001: No dedicated CodeArts/ProjectMan MCP exists. All operations via hcloud CLI. [VERIFIED_FROM_PUBLIC_API_DOCS]
GAP-CODEARTS-002: CreateProjectV4 exists in the official SDK but is not documented in the public CodeArts Req API Reference index; must be probed live per tenant/CLI version before use (Step 4), with a manual console fallback. [VERIFIED_FROM_SDK_SOURCE] [NOT_IN_PUBLIC_DOCS]
GAP-CODEARTS-003: No operation exists to list global project-creation templates; template_id can only be used if already known and verified by the approval owner. [VERIFIED_FROM_SDK_SOURCE]
GAP-CODEARTS-004: This skill has not been executed against a live hcloud CLI or live tenant; all CLI syntax is derived from public API documentation and official SDK source, not from --help output captured live. [NOT_LIVE_TESTED]
Output artifacts
artifacts/codearts-intent.json — Parsed intent
artifacts/codearts-auth-discovery.json — Authentication, region, and service availability
artifacts/codearts-existing-projects.json — Name-check and existing-project discovery
Project name is unique platform-wide, not per-tenant
ListProjectsV4 --search= shows no matching project in this tenant
Choose a different project name
ListProjectsV4/ShowProjectInfoV4 return no results after creation
Manual creation not yet completed, or search term mismatch
Ask human operator to confirm console creation
Retry the read after confirming creation, or correct the search term
AddMemberV4 fails for a specific user
Invalid user_id/domain_id, or role not permitted
Error details from the call
Re-resolve the user's IAM identifiers; confirm role_id is a supported value
Region mismatch between plan and call
--cli-region omitted or wrong on a later command
Compare command flags across steps
Ensure every ProjectMan command uses the same --cli-region used at creation
Failure handling
Authentication failure: verify hcloud config, region, IAM permissions. Do not retry with different credentials without operator confirmation.
Region rejected: verify against the confirmed ProjectMan region list before assuming a transient error.
Capability probe negative: switch to manual console fallback; do not invent a replacement command.
Name check ambiguous or taken: present to approval owner; do not auto-select or auto-rename.
Creation failure (CLI or manual): STOP, preserve evidence, report to approval owner.
Update/member-addition failure: STOP, report which operations succeeded/failed; do not roll back successful ones automatically.
Verification failure: report; do not delete or recreate the project automatically.
Recovery procedure
If failure during discovery (Steps 2-4): no resource created. Fix authentication/region/capability issue and retry from Step 2.
If failure during creation (Step 6, Path A): check the error. If authorization-related, switch to Path B in the same step. If quota/name related, correct and retry.
If failure during creation (Step 6, Path B): ask the human operator whether the console step actually completed before assuming failure; re-run Step 7 to check.
If failure during design configuration (Step 8): project exists but is only partially configured. Report exactly which updates/members succeeded; retry only the failed ones.
If failure during verification (Step 9): project and/or members may be in an inconsistent state. Do not delete the project; report and await a decision.
Rollback
Project creation is not automatically reversible in this skill's normal workflow. A project should NOT be deleted automatically after a downstream failure (for example, a failed member addition) — report and let the approval owner decide. Members can be removed individually without deleting the whole project. Manual (Path B) creation cannot be "rolled back" by this skill; a human operator created it and must also remove it if needed.
Rollback actions below require explicit approval and are never part of the normal Steps 1-10 workflow:
Do NOT delete the project automatically after any failure in Steps 8-9. Do NOT remove members without explicit approval. Do NOT attempt to "undo" a manual (Path B) console creation programmatically. Do NOT invent a bulk-rollback command that is not documented here.
Evidence and traceability
All hcloud CLI commands logged with timestamps
project_id, project_num_id, and member identifiers recorded in artifacts
Approval decisions recorded with approver identity and timestamp
Capability probe result recorded and reusable across runs against the same tenant/CLI version (re-probe if either changes)
No secrets in any artifact
Known limitations
No dedicated CodeArts or ProjectMan MCP exists; all operations via hcloud CLI [VERIFIED_FROM_PUBLIC_API_DOCS]
CreateProjectV4 is undocumented in the public API Reference index; its live availability through KooCLI has not been confirmed by this skill's authors and MUST be probed before first use [NOT_LIVE_TESTED] [NOT_IN_PUBLIC_DOCS]
No global "list project-creation templates" operation exists; template_id can only be supplied, not discovered, by this skill [VERIFIED_FROM_SDK_SOURCE]
ProjectMan is only confirmed available in 9 regions (see Rule 4); other regions are unverified [REGION_DEPENDENT]
This skill's scope explicitly excludes CodeArts Repo, Build, Check, Deploy, Pipeline, and Release
Manual console fallback (Path B) cannot be automated by this skill; it requires a human operator to click through the console
Status justification
Status: READY_WITH_WARNINGS
Evidence:
ListProjectsV4, CheckProjectNameV4, ShowProjectInfoV4, UpdateProjectV4, DeleteProjectV4, AddMemberV4, ListProjectMembersV4 are documented in the public Huawei Cloud CodeArts Req API Reference [VERIFIED_FROM_PUBLIC_API_DOCS]
CreateProjectV4 (POST /v4/project) is present and fully defined (request/response models, required/optional fields, HTTP method and path) in the officially released huaweicloud-sdk-projectman Python SDK source code on the official huaweicloud GitHub organization, but is absent from the public API Reference index [VERIFIED_FROM_SDK_SOURCE] [NOT_IN_PUBLIC_DOCS]
ProjectMan's supported regions were confirmed from the SDK's region definition file, not from a generic Huawei Cloud region list [VERIFIED_FROM_SDK_SOURCE]
No dedicated CodeArts/ProjectMan MCP exists [VERIFIED_FROM_PUBLIC_API_DOCS]
All write operations require explicit approval [INFERRED]
No cloud-side or CLI-side live test was executed; this authoring environment had no Huawei Cloud network access or credentials [NOT_LIVE_TESTED]
Because of the above, this skill mandates a live capability probe (Step 4) before any workflow instance relies on CreateProjectV4, and ships a fully documented manual fallback for when the probe is negative
