Full PR lifecycle in a fresh task-owned git worktree: implement via the ulw-loop skill with mandatory evidence-bound manual QA → reviewer-readable English PR → verification loop (CI + Cubic, where Cubic is skipped only when its quota is exhausted) → merge by default → worktree cleanup. Decomposes one task into the smallest atomic, independently-mergeable PRs and builds the independent ones concurrently via one worktree per PR driven by parallel subagents or a team. Unbounded loop: any failing gate sends you back to fix-and-re-QA inside that PR's worktree. Use whenever implementation work needs to land as a PR. Triggers: 'create a PR', 'implement and PR', 'work on this and make a PR', 'implement issue', 'land this as a PR', 'split into atomic PRs', 'parallel PRs', 'work-with-pr', 'PR workflow', 'implement end to end', even when user just says 'implement X' if the context implies PR delivery.
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Une commande directe contourne le prompt de vérification. Examinez la source avant de l'exécuter.
Full PR lifecycle in a fresh task-owned git worktree: implement via the ulw-loop skill with mandatory evidence-bound manual QA → reviewer-readable English PR → verification loop (CI + Cubic, where Cubic is skipped only when its quota is exhausted) → merge by default → worktree cleanup. Decomposes one task into the smallest atomic, independently-mergeable PRs and builds the independent ones concurrently via one worktree per PR driven by parallel subagents or a team. Unbounded loop: any failing gate sends you back to fix-and-re-QA inside that PR's worktree. Use whenever implementation work needs to land as a PR. Triggers: 'create a PR', 'implement and PR', 'work on this and make a PR', 'implement issue', 'land this as a PR', 'split into atomic PRs', 'parallel PRs', 'work-with-pr', 'PR workflow', 'implement end to end', even when user just says 'implement X' if the context implies PR delivery.
Work With PR — Full PR Lifecycle
You are executing a complete PR lifecycle: from fresh task-owned worktree setup, through ulw-loop-driven implementation with evidence-bound manual QA, PR creation, and an unbounded verification loop until the PR is merged. The loop has two gates — CI and Cubic — and a failing gate sends you back into that PR's worktree to fix and re-QA. You keep cycling until every active gate passes at once.
The unit of delivery is the smallest PR that compiles, passes, and stands on its own — not "one task, one PR." A single task routinely splits into several atomic PRs; the lifecycle below describes ONE of them, so apply it to each, and build the independent ones concurrently (Phase 0).
Phase 0: Setup → Split into atomic PRs, then branch + worktree per PR (parallel when independent)
Phase 1: Implement → Drive the work through the ulw-loop skill:
evidence-bound manual QA per success criterion, atomic commits
Phase 2: PR Creation → Push, create a reviewer-readable English PR targeting dev
Phase 3: Verify Loop → Unbounded iteration; a failing gate routes back to Phase 1:
├─ Gate A: CI → gh pr checks (bun test, typecheck, build)
└─ Gate B: Cubic → cubic-dev-ai[bot] "No issues found"
(SKIPPED, not failed, when Cubic's quota is exhausted)
Phase 4: Merge → Auto-merge by default; wait until actually merged, then worktree cleanup
Phase 0: Setup
Create a fresh isolated worktree for each PR before implementation starts. The user's main working directory is read-only context — it may have uncommitted work, and a branch checkout would destroy it. Isolation also makes parallelism cheap: one worktree per PR, so several build at once without colliding.
1. Decide the PR split
Before creating anything, decompose the task into the smallest atomic PRs that each compile, pass, and deliver one reviewable slice. Prefer more small PRs over one large one — a 200-line PR gets a real review; a 2000-line PR gets a rubber stamp. Sequence by dependency: independent slices branch off the base and run in parallel; dependent slices stack, each branched off the previous.
Building more than one independent PR concurrently is the recommended default, not an exotic option:
Subagents — dispatch one background subagent per PR, each owning its own worktree, branch, and the full Phase 0→4 lifecycle.
Team — for larger fan-outs, form a team (team_mode) and assign one member per PR.
When the work is large enough to need a plan (ulw-plan), this decomposition is not optional polish: the plan MUST encode the atomic PRs, their dependency order, and which run in parallel as first-class structure.
2. Resolve repository context
REPO=$(gh repo view --json nameWithOwner -q .nameWithOwner)
REPO_NAME=$(basename"$PWD")
BASE_BRANCH="dev"# CI blocks PRs to master
3. Create branch
If user provides a branch name, use it. Otherwise, derive from the task:
All subsequent work happens inside the worktree. Install dependencies if needed:
cd"$WORKTREE_PATH"# If bun project:
[ -f "bun.lock" ] && bun install
Phase 1: Implement
Drive all implementation through the ulw-loop skill (your harness's native ultrawork loop) from inside the worktree. Do not free-hand the work: ulw-loop decomposes the brief into goals with binary success criteria, delegates code edits and QA to right-sized subagents, and — the reason it is mandatory here — forces every success criterion to be proven with evidence-bound manual QA on a real surface, not just a green test suite.
Manual QA is the gate, not the tests. This repo's rule is absolute: a change that reaches OpenCode or Codex is not done until you have driven the real harness (tmux / HTTP / browser / GUI — use the manual-QA channel table in the ulw-loop skill) AND written the evidence to disk. No evidence file means the QA did not happen, and you may NOT commit or push. "It typechecks" and "bun test is green" are NOT QA.
Scope discipline
Within each PR, stay minimal: deliver its one slice, add the test, prove it, stop. Do not refactor surrounding code, add config options, or "improve" things that aren't broken — that work belongs in its own PR, and scope creep makes failures harder to isolate.
Commit strategy
ulw-loop commits through git-master. Keep commits atomic so that if CI fails on one change you can isolate and fix it without unwinding everything:
Each commit pairs implementation with its tests, and you commit a criterion only after its QA evidence is on disk.
Pre-push local validation
Before pushing, run the same checks CI will run — a cheap pre-filter that saves a ~3-5 min CI round-trip, NOT a substitute for the manual QA above:
bun run typecheck
bun test
bun run build
Fix any failure before pushing; each fix is its own atomic commit.
Phase 2: PR Creation
<pr_creation>
Push and create PR
git push -u origin "$BRANCH_NAME"
Write the PR body in English for a human reviewer who has not followed the implementation thread. It must explain the work in plain terms, group changes by reviewer-relevant area instead of dumping files, and make QA evidence auditable without forcing the reviewer to guess what each log proves. Cite sanitized artifacts; do not paste raw secret-bearing logs, env dumps, tokens, auth headers, or private credentials into the PR.
If the PR body needs screenshots or terminal PNGs, follow docs/reference/github-attachment-upload.md: upload via GitHub user attachments from an authenticated web session, include only the final https://github.com/user-attachments/assets/<uuid> URLs, and never commit temporary images, use release assets, use external hosts, or log cookies/tokens.
gh pr create \
--base "$BASE_BRANCH" \
--head"$BRANCH_NAME" \
--title "$PR_TITLE" \
--body "$(cat <<'EOF'
## Summary
[2-4 sentences in plain language: what changed, why it changed, and how observable behavior is different after this PR.]
## Changes
[Group bullets by reviewer-relevant area, not by file. Each bullet should say what changed and how a reviewer can map it to the diff.]
## QA & Evidence
For each automated command or manual QA action:
- **What was tested:** [command or surface driven, with the behavior it was meant to prove]
- **Observed result:** [actual result, including before/after when relevant]
- **Artifact:** [`path/to/sanitized-log-or-report`]
- **Why sufficient:** [which risk or success criterion this evidence covers]
## Risks & Residuals
[Map each meaningful risk to the evidence above and state the conclusion: mitigated, accepted, or blocked. Include unavailable gates here with the concrete reason.]
## Related Issues
[Link to issue if applicable]
EOF
)"
Capture the PR number:
PR_NUMBER=$(gh pr view --json number -q .number)
</pr_creation>
Phase 3: Verification Loop
This is the core of the skill. Every active gate must pass for the PR to be ready. The loop has no iteration cap — keep going until done. Gate ordering is intentional: CI is cheapest/fastest; Cubic is external and asynchronous. Gate B (Cubic) is the one gate that can be SKIPPED rather than satisfied — only when its quota is exhausted; it is never skipped just because it found issues. A failing gate is not a patch-and-push: route back to Phase 1, where fixes get the same scope discipline and, if behavior changed, fresh manual-QA evidence before you re-enter the loop.
<verify_loop>
while true:
1. Wait for CI → Gate A
2. If CI fails → back to Phase 1: read logs, fix + re-QA, commit, push, continue
3. Check Cubic → Gate B
4. If Cubic has issues → back to Phase 1: fix + re-QA, commit, push, continue
5. If Cubic quota out → record Gate B SKIPPED, stop waiting on it
6. All active gates pass → break
Gate A: CI Checks
CI is the fastest feedback loop. Subscribe to its completion via monitor — never block a model round-trip on gh pr checks --watch.
# Subscribe to CI completion — the monitor event wakes the session when checks finish.
# Do NOT use `gh pr checks --watch` as a blocking tool call; it burns a full model
# round-trip (~29s) on every poll. Instead, register a monitor and end the turn:
monitor({
description: "CI completion for PR $PR_NUMBER",
command: "gh pr checks $PR_NUMBER --watch --fail-fast",
filter: "completed|fail|cancel"
})
# → end turn; the monitor's matching line arrives as an injected event.
# For a single midpoint status peek (at most once), use:
# gh pr checks "$PR_NUMBER" # one-shot, no --watch
On failure: Get the failed run logs to understand what broke:
# Find the failed run
RUN_ID=$(gh run list --branch "$BRANCH_NAME" --status failure --json databaseId --jq '.[0].databaseId')
# Get failed job logs
gh run view "$RUN_ID" --log-failed
Read the logs, then fix per the iteration discipline below.
Gate B: Cubic Approval
Cubic (cubic-dev-ai[bot]) is an automated review bot that comments on PRs. It does NOT use GitHub's APPROVED review state — instead it posts comments with issue counts and confidence scores.
Approval signal: The latest Cubic comment contains **No issues found** and confidence **5/5**.
Issue signal: The comment lists issues with file-level detail.
Quota-exhausted signal: Cubic posts a usage/quota/limit message instead of a review, or no Cubic review appears within the bounded wait below. This is the ONLY case where you skip Gate B and proceed — record it as SKIPPED in the final report, never silently. Issues are never a reason to skip.
# Get the latest Cubic review
CUBIC_REVIEW=$(gh api "repos/${REPO}/pulls/${PR_NUMBER}/reviews" \
--jq '[.[] | select(.user.login == "cubic-dev-ai[bot]")] | last | .body')
ifecho"$CUBIC_REVIEW" | grep -q "No issues found"; thenecho"Cubic: APPROVED"elifecho"$CUBIC_REVIEW" | grep -qiE "quota|usage limit|rate limit|out of (credits|reviews)|upgrade your plan"; thenecho"Cubic: SKIPPED (quota exhausted)"# Gate B satisfied-by-skip; do not loop on itelseecho"Cubic: ISSUES FOUND"echo"$CUBIC_REVIEW"fi
On issues: Cubic's review body contains structured issue descriptions. Parse them, determine which are valid (some may be false positives), and fix the valid ones per the iteration discipline below.
Cubic reviews are triggered automatically on PR updates. After pushing a fix, subscribe to the new review arriving — never spin a for _ in $(seq 1 30) polling loop that burns model round-trips.
# Subscribe to a NEW Cubic review after push. The monitor exits when a review
# newer than PUSH_TIME appears, or times out (quota exhausted → Gate B SKIPPED).
PUSH_TIME=$(date -u +%Y-%m-%dT%H:%M:%SZ)
monitor({
description: "Cubic review for PR $PR_NUMBER",
command: "LATEST=$(gh api repos/${REPO}/pulls/${PR_NUMBER}/reviews --jq '[.[] | select(.user.login == "cubic-dev-ai[bot]")] | last | .submitted_at // empty'); [ -n \"$LATEST\" ] && [ \"$LATEST\" > \"$PUSH_TIME\" ] && echo NEW_REVIEW || echo WAITING",
filter: "NEW_REVIEW",
timeout_ms: 600000 # 10 min bound — if no review arrives, Gate B is SKIPPED (quota exhausted)
})
# → end turn; if the monitor times out without NEW_REVIEW, treat Gate B as SKIPPED.
# For a single midpoint peek (at most once), use:
# gh api "repos/${REPO}/pulls/${PR_NUMBER}/reviews" --jq '[.[] | select(.user.login == "cubic-dev-ai[bot]")] | last | .submitted_at'
Iteration discipline
Each iteration through the loop:
Fix ONLY the issues identified by the failing gate
If the fix changes runtime behavior, capture fresh manual-QA evidence (Phase 1)
Commit atomically (one logical fix per commit)
Push
Re-enter from Gate A (code changed → full re-verification)
Avoid the temptation to "improve" unrelated code during fix iterations. Scope creep in the fix loop makes debugging harder and can introduce new failures.
</verify_loop>
Phase 4: Merge & Cleanup
Once all active gates pass (Cubic may be SKIPPED on quota):
<merge_cleanup>
Merge the PR (auto-merge by default)
Enabling auto-merge is the default - do it unless the user explicitly told you not to merge. Auto-merge hands the merge to GitHub, which lands the PR the moment every required gate is green, so you never sit and babysit checks. It does NOT bypass the gates: if a gate fails, GitHub will not merge, which routes you back to Phase 1 to fix and re-QA like any other failing gate.
# This repository requires merge commits. Never use --squash or --rebase.# --auto arms auto-merge: GitHub merges as soon as all required checks pass.
gh pr merge "$PR_NUMBER" --merge --auto --delete-branch
# If the repo has not enabled the auto-merge feature, --auto errors; once the gates# are green, fall back to a direct merge: gh pr merge "$PR_NUMBER" --merge --delete-branch
Then subscribe to the merge completing — never block a model round-trip on an until [ ... MERGED ] polling loop:
# Subscribe to merge completion. The monitor exits when gh pr view returns MERGED.
monitor({
description: "Merge completion for PR $PR_NUMBER",
command: "[ \"$(gh pr view $PR_NUMBER --json state -q .state)\" = \"MERGED\" ] && echo MERGED || echo WAITING",
filter: "MERGED",
timeout_ms: 1800000 # 30 min bound for auto-merge to land after all gates pass
})
# → end turn; the MERGED event wakes the session for the cleanup step.
# If the monitor times out, check merge state once: gh pr view "$PR_NUMBER" --json state -q .state
If the user opted out of merging, skip the merge but STILL run the cleanup below: the worktree is removed either way.
Sync .omo state back to main repo
Before removing the worktree, copy .omo/ state back. When .omo/ is gitignored, files written there during worktree execution are not committed or merged — they would be lost on worktree removal.
# Sync .omo state from worktree to main repo (preserves task state, plans, notepads)if [ -d "$WORKTREE_PATH/.omo" ]; thenmkdir -p "$ORIGINAL_DIR/.omo"cp -r "$WORKTREE_PATH/.omo/"* "$ORIGINAL_DIR/.omo/" 2>/dev/null || truefi
Clean up the worktree
The worktree served its purpose — remove it to avoid disk bloat:
cd"$ORIGINAL_DIR"# Return to original working directory
git worktree remove "$WORKTREE_PATH"# Prune any stale worktree references
git worktree prune
Report completion
Summarize what happened:
## PR Complete
- **PR**: #{PR_NUMBER} — {PR_TITLE}
- **Branch**: {BRANCH_NAME} → {BASE_BRANCH}
- **Iterations**: {N} verification loops
- **Gates**: CI pass | Cubic {pass | SKIPPED (quota exhausted)}
- **Merged**: {yes | no — left for you to merge, as requested}
- **Worktree**: cleaned up
</merge_cleanup>
Failure Recovery
<failure_recovery>
If you hit an unrecoverable error (e.g., merge conflict with base branch, infrastructure failure):
Do NOT delete the worktree — the user may want to inspect or continue manually
Report what happened, what was attempted, and where things stand
Include the worktree path so the user can resume
For merge conflicts:
cd"$WORKTREE_PATH"
git fetch origin "$BASE_BRANCH"
git rebase "origin/$BASE_BRANCH"# Resolve conflicts, then continue the loop
</failure_recovery>
Anti-Patterns
Violation
Why it fails
Severity
Working in main worktree instead of isolated worktree
Pollutes user's working directory, may destroy uncommitted work
CRITICAL
Committing or pushing without manual-QA evidence on disk
"Tests pass" never proves the feature works; the repo forbids it for OpenCode/Codex-touching changes
CRITICAL
Pushing directly to dev/master
Bypasses review entirely
CRITICAL
Skipping CI gate after code changes
Cubic may pass on stale code
CRITICAL
Skipping Cubic because it found issues
Only an exhausted quota justifies a skip; real issues must be fixed and re-pushed
HIGH
Fixing unrelated code during verification loop
Scope creep causes new failures
HIGH
Deleting worktree on failure
User loses ability to inspect/resume
HIGH
Ignoring Cubic false positives without justification
Cubic issues should be evaluated, not blindly dismissed
MEDIUM
Bundling independent slices into one big PR
Atomic review dies — a 2000-line PR gets rubber-stamped, regressions hide, and one bad slice blocks all the others
HIGH
Giant single commits
Harder to isolate failures, violates git-master principles
