livepilot-performance-engine

name	livepilot-performance-engine
description	This skill should be used when the user asks to "perform live", "what's safe to do during a show", "scene handoff", "energy flow", "performance mode", "safe moves", or wants live performance support with safety constraints.

Performance Engine — Safety-First Live Performance

The performance engine enforces a strict safety model for live performance. Every action is classified before execution. Destructive operations are blocked. Risky operations require user confirmation. Only safe operations execute freely.

Safety Classification

Every performance action falls into one of four tiers.

Safe — Execute Freely

These actions are non-destructive and audience-invisible if they fail. Execute without asking.

• fire_scene / fire_clip — launch scenes or clips (the core of live performance)
• set_track_send with small delta — nudge send levels (reverb/delay throws)
• set_device_parameter on mapped macros — macro knob adjustments
• set_track_mute / set_track_solo — mute/solo toggles
• set_track_volume with delta <= 3 dB — volume nudges
• set_track_pan with delta <= 0.2 — subtle pan shifts
• Filter sweeps via set_device_parameter on Auto Filter — smooth frequency movement

Caution — Require User Confirmation

These actions are audible and may cause a noticeable glitch if wrong. Always ask before executing.

• set_tempo with delta <= 5 BPM — tempo nudge (can destabilize synced elements)
• toggle_device — enable/disable effects (may cause pops or silence)
• set_track_pan with delta > 0.2 — large pan moves are disorienting live
• set_track_volume with delta > 3 dB — large volume jumps

Present the action to the user: "I will [action]. This may [risk]. Confirm?"

Blocked — Never Execute During Performance

These actions risk audible disasters, data loss, or session corruption during a live show.

• delete_device / find_and_load_device — device chain surgery causes audio interruption
• create_arrangement_clip / create_clip / delete_clip — clip creation/deletion
• create_midi_track / create_audio_track / delete_track — track structure changes
• add_notes / modify_notes / remove_notes — note editing while playing
• set_clip_loop / set_clip_warp_mode — clip property changes while playing
• flatten_track / freeze_track — CPU-intensive operations
• Any arrangement-view editing tools

If the user requests a blocked action during performance mode, explain why it is blocked and suggest a safe alternative: "That requires editing the device chain, which can cause audio dropouts during a live show. Instead, try [safe alternative]."

Unknown — Treat as Blocked

Any action not explicitly classified above defaults to blocked. Do not experiment with unclassified actions during a live performance.

Performance Loop

Step 1 — Get State

Call get_performance_state to read the current session state:

• Playing status, current tempo, time signature
• Which scenes and clips are currently playing
• Track arm states, solo/mute states
• Current energy level estimate

Step 2 — Get Safe Moves

Call get_performance_safe_moves to get a list of contextually appropriate safe actions based on the current state. The response is filtered by what makes musical sense right now — not just what is technically safe.

Step 3 — Check Safety

Before executing any user request, call check_safety(move_type) to verify the classification. The response confirms: safe, caution, or blocked with an explanation.

Step 4 — Execute Safe/Caution Only

• Safe: execute immediately
• Caution: present to user, wait for confirmation, then execute
• Blocked: refuse with explanation and alternative

Step 5 — Scene Handoff

For transitioning between scenes (the primary live performance action), call plan_scene_handoff(from_scene, to_scene) to get a transition plan:

• Which clips change between the scenes
• Recommended launch timing (quantization)
• Volume/send adjustments to smooth the handoff
• Any tempo changes between scenes

Execute the handoff plan using safe actions only.

Energy Flow

During a live set, track the energy trajectory:

1. get_performance_state includes an energy_estimate (0.0-1.0)
2. Use scene ordering to build energy arcs: low-energy scenes for intros/breakdowns, high-energy for drops/peaks
3. plan_scene_handoff accounts for energy delta — large energy jumps get transition suggestions

Performance Mode Entry

When the user says "performance mode", "going live", or "starting the show":

1. Call get_performance_state to verify the session is ready
2. Confirm the safety model with the user: "Performance mode active. I will only execute safe actions freely and ask before caution-level moves. Destructive edits are blocked."
3. Switch to a response style optimized for speed: short confirmations, no lengthy explanations mid-performance
4. Prioritize scene launches and safe parameter nudges

Performance Mode Exit

When the user says "done performing", "show's over", or "exit performance mode":

1. Confirm: "Performance mode ended. Full editing capabilities restored."
2. Resume normal operation with all tools available

Emergency Actions

If something goes wrong during a live show:

• stop_all_clips — emergency silence (use only if requested)
• set_master_volume(0.0) — fade to silence
• set_track_mute on the problem track — isolate the issue

Never call undo during a live performance — it may revert a scene launch or clip state in unpredictable ways.