Exécutez n'importe quel Skill dans Manus
en un clic

Exécutez n'importe quel Skill dans Manus en un clic

pi-openclaw-pi5-quickstart

Étoiles1

Forks0

Mis à jour23 février 2026 à 17:51

Set up and start pi-openclaw-mcp-stack on Raspberry Pi 5 with Raspberry Pi OS 64-bit Bookworm. Use when users need fresh install commands, Docker Compose/Buildx prerequisite fixes, profile selection (mcp-image, mcp-local, mcp), environment setup, first boot, or baseline health checks.

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Exécuter dans Manus

Source

eoinjordan

eoinjordan/pi-openclaw-mcp-stack

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Exécuter dans Manus

Métiers associésSOC

Basé sur la classification professionnelle SOC

Administrateurs de réseaux et de systèmes informatiquesProfessions informatiques et mathématiques·SOC 15-1244

Explorateur de fichiers

6 fichiers

SKILL.md

readonly

name	pi-openclaw-pi5-quickstart
description	Set up and start pi-openclaw-mcp-stack on Raspberry Pi 5 with Raspberry Pi OS 64-bit Bookworm. Use when users need fresh install commands, Docker Compose/Buildx prerequisite fixes, profile selection (mcp-image, mcp-local, mcp), environment setup, first boot, or baseline health checks.

Pi OpenClaw Pi5 Quickstart

Confirm host details and paths.

Use the active Linux username and home path.
Do not assume user ubuntu.
Prefer /home/<user>/pi-openclaw-mcp-stack.

Choose one EI bridge mode.

Default to mcp-image.
Use mcp-local only when local ei-agentic-claude edits are required.
Use mcp if no image and no local repo are available.

Install prerequisites and recover missing Compose/Buildx packages.

Follow references/prereq-fallbacks.md.
Use the quickstart script when possible.

Configure .env for the chosen mode.

Required: TELEGRAM_TOKEN, EI_API_KEY.
Optional: OPENAI_API_KEY or OPENAI_BASE_URL for Ollama.
For mcp-local, set EI_AGENTIC_CLAUDE_PATH.

Start, restart, or reload services with Compose.

Use references/compose-start-restart.md for start/restart commands.
Use checks in references/verify-checklist.md.
If upstream health is degraded, switch to $pi-openclaw-flow-audit.

Report state clearly.

Show mode, running containers, health status, and failing component if any.

References

references/mode-selection.md
references/prereq-fallbacks.md
references/verify-checklist.md
references/compose-start-restart.md

Plus depuis ce dépôt

même dépôt

pi-openclaw-ei-arduino-deploy

eoinjordan/pi-openclaw-mcp-stack

Run combined Edge Impulse MCP and Arduino MCP deployment workflows in pi-openclaw-mcp-stack. Use when users need to build an Arduino deployment package from an Edge Impulse impulse, bundle it for Arduino build, validate/build through Arduino MCP, and hand off to flash workflow for Nano 33 BLE deployment.

2026-02-261

pi-openclaw-flow-audit

eoinjordan/pi-openclaw-mcp-stack

Audit and troubleshoot end-to-end command flow in pi-openclaw-mcp-stack across clawdbot, openclaw-gateway, arduino-mcp, and EI bridge services. Use when users see degraded upstream health, connection refused errors, container restarts, missing responses, or need proof of routing behavior.

2026-02-261

pi-openclaw-arduino-flash

eoinjordan/pi-openclaw-mcp-stack

Flash firmware to Arduino boards in the pi-openclaw-mcp-stack workflow after successful build/deployment. Use when users need serial port detection, board/FQBN checks, upload commands for Nano 33 BLE, post-flash verification, or EI deployment handoff completion.

2026-02-261

pi-openclaw-chat-providers

eoinjordan/pi-openclaw-mcp-stack

Configure chat and bot access for pi-openclaw-mcp-stack. Use when users need Telegram BotFather setup, token wiring, OpenAI-compatible provider variables, or local Ollama setup on Pi 5.

2026-02-231

name	pi-openclaw-pi5-quickstart
description	Set up and start pi-openclaw-mcp-stack on Raspberry Pi 5 with Raspberry Pi OS 64-bit Bookworm. Use when users need fresh install commands, Docker Compose/Buildx prerequisite fixes, profile selection (mcp-image, mcp-local, mcp), environment setup, first boot, or baseline health checks.

Pi OpenClaw Pi5 Quickstart

Confirm host details and paths.

Use the active Linux username and home path.
Do not assume user ubuntu.
Prefer /home/<user>/pi-openclaw-mcp-stack.

Choose one EI bridge mode.

Default to mcp-image.
Use mcp-local only when local ei-agentic-claude edits are required.
Use mcp if no image and no local repo are available.

Install prerequisites and recover missing Compose/Buildx packages.

Follow references/prereq-fallbacks.md.
Use the quickstart script when possible.

Configure .env for the chosen mode.

Required: TELEGRAM_TOKEN, EI_API_KEY.
Optional: OPENAI_API_KEY or OPENAI_BASE_URL for Ollama.
For mcp-local, set EI_AGENTIC_CLAUDE_PATH.

Start, restart, or reload services with Compose.

Use references/compose-start-restart.md for start/restart commands.
Use checks in references/verify-checklist.md.
If upstream health is degraded, switch to $pi-openclaw-flow-audit.

Report state clearly.

Show mode, running containers, health status, and failing component if any.

References

references/mode-selection.md
references/prereq-fallbacks.md
references/verify-checklist.md
references/compose-start-restart.md