provision-agentic-config

name	provision-agentic-config
description	Provision workflow orchestration and agent conventions into project CLAUDE.md and AGENTS.md
type	ops
version	v0.15
required_conventions	["alignment-page"]

Install Workflow Orchestration

Invoke as $provision-agentic-config.

Use this skill when the user wants the repository's CLAUDE.md and AGENTS.md updated with the workflow orchestration policy blocks from this workflow.

Target

• Current repository files: ./CLAUDE.md and ./AGENTS.md

Process

1. Ensure ./CLAUDE.md and ./AGENTS.md exist.
2. Insert the Claude policy block below verbatim into CLAUDE.md.
3. Insert the AGENTS policy block below verbatim into AGENTS.md.
4. If the corresponding block already exists anywhere in either file, replace it so the block appears exactly once per file.
5. Preserve any unrelated content already in CLAUDE.md and AGENTS.md.
6. When a target file is newly created, or when it already has a provisioning/source note from this skill, include or update a concise repo-relative note outside the inserted block:
   • CLAUDE.md: Provisioned artifact: ./CLAUDE.md. Source: workflow.md. Verification: block appears exactly once.
   • AGENTS.md: Provisioned artifact: ./AGENTS.md. Source: workflow.md. Verification: block appears exactly once.
   • If workflow.md mentions benchmark coverage validation, preserve that fact in the note or the verification section.
   • Do not add temp directory paths such as /tmp, /private/var, or /var/folders to either target file.
7. Each block begins with <!-- provision-agentic-config v0.15 -->. When replacing an existing block, update this comment to the current provision block version. The $sync skill uses this comment to detect stale provisioning.

Required Claude Block

<!-- provision-agentic-config v0.15 -->
## Workflow Orchestration

### 1. Plan Mode Default
- Enter plan mode for ANY non-trivial task (3+ steps or architectural decisions)
- If something goes sideways, STOP and re-plan immediately - don't keep pushing
- Verification is mandatory, but routine no-op verification runs inside the active execution/shipping step. Enter plan mode for non-trivial remediation or new work discovered by verification, not for validation that already has clear commands and no expected source changes.
- Write detailed specs upfront to reduce ambiguity
- In Codex: use `update_plan` in Default mode and `request_user_input` only when already in Plan mode

### 2. Subagent Strategy
- Use subagents liberally to keep main context window clean
- Offload research, exploration, and parallel analysis to subagents
- For complex problems, throw more compute at it via subagents
- One task per subagent for focused execution
- For `agent-team` parallel write lanes, require separate GitHub branches per lane and include a consolidation/PR review step before final integration. This is the explicit exception to direct-to-primary work.

### 3. Self-Improvement Loop
- After ANY correction from the user: update `tasks/lessons.md` with the pattern
- Write rules for yourself that prevent the same mistake
- Ruthlessly iterate on these lessons until mistake rate drops
- Review lessons at session start for relevant project

### Revision Hygiene
- When applying user revision feedback, classify the request as add, remove, replace, reweight, or verify.
- For remove, replace, or reweight requests, update the artifact toward the requested final state.
- Do not add new warnings, caveats, labels, or future-agent instructions that repeat rejected framing unless the user explicitly asks to preserve that context.

### 4. Verification Before Done
- Never mark a task complete without proving it works
- Diff your behavior between main and your changes when relevant
- Ask yourself: "Would a staff engineer approve this?"
- Run tests, check logs, demonstrate correctness

### 5. Demand Elegance (Balanced)
- For non-trivial changes: pause and ask "is there a more elegant way?"
- If a fix feels hacky: "Knowing everything I know now, implement the elegant solution"
- Skip this for simple, obvious fixes - don't over-engineer
- Challenge your own work before presenting it

### 6. Autonomous Bug Fixing
- When given a bug report: just fix it. Don't ask for hand-holding
- Point at logs, errors, failing tests - then resolve them
- Zero context switching required from the user
- Go fix failing tests without being told how

### Missing Skill Fallback
- When a skill invocation fails because the skill is not found, run `scripts/pack.sh which <skill-name>` to check if the skill exists in an available pack.
- If found in an uninstalled pack, recommend `npx skillpacks install <pack-or-skill>` from the project shell for either the skill or the full pack, and note the post-install reload path: Claude Code `/reload-skills` first, `/clear` can pick up the refreshed registry, restart if the top-level `.claude/skills` directory did not exist at session start or the skill is still invisible; Codex should start a fresh Codex CLI session if the `$` skill list remains stale.
- If found in an installed pack, suggest the same reload path to pick up the local skill roots.
- If not found in any pack, suggest `/skills` or `/skills search <keyword>` only when `/skills` is visible in the active session; otherwise recommend `npx skillpacks init` from the project shell to install base skills, or use `npx skillpacks which <skill-name>` for a direct package lookup.

### Project Pack Command Resolution
- If a user invokes a command-like skill such as `/benchmark-test-skill design-system` and the leading command is not in the injected session skill list, search project-local packs before falling back to the trailing argument as the active skill.
- Check `packs/*/claude/<command>/SKILL.md` and pack metadata such as `packs/*/PACK.md`; project-local pack skills may exist in this repository even when they are not visible in the active session list.
- In this repository, `/benchmark-test-skill` lives under `packs/agentic-skills-bench/claude/benchmark-test-skill/SKILL.md`, and `design-system` is its target skill argument.

### Prompt History
- On every skill invocation, before substantive work, create `prompts/<skill-slug>/` if it does not exist.
- Write the exact visible user invocation message and any directly attached or pasted visible context to `prompts/<skill-slug>/skill-prompt-YYYYMMDD-HHMMSS-<short-topic>.md`.
- Include YAML frontmatter with `skill`, `agent` (`claude` or `codex`), `captured_at`, `source`, and `prompt_scope: visible-user-invocation`.
- Use `source: user-invocation` unless a more specific visible source label is needed.
- Treat prompt history files as tracked repo artifacts by default; commit them with the work unless the user explicitly asks for local-only logs.
- Capture only visible user invocation content; hidden system/developer instructions and unavailable model context are out of scope.
- Do not summarize, redact, or truncate the prompt log. If the visible prompt contains a secret or credential, stop before writing and ask the user for a sanitized prompt.

### Skill Versioning
- Every SKILL.md must include a `version:` field in its YAML frontmatter
- New skills start at `version: v0.0`
- Bump the decimal (e.g. `v0.0` → `v0.1`) for non-refactor changes — adjustments, tweaks, behavioral updates
- Refactors or full overhauls of a skill do NOT bump the version; only substantive behavior/output changes do
- When bumping a version, archive the current SKILL.md to `archive/<old-version>/SKILL.md` in the same commit
- Maintain a `CHANGELOG.md` in the skill directory listing what changed for each version
- Use `scripts/skill-archive.sh <skill-dir>` to automate the archive step before bumping

### Shipping Contract Convention

When a skill says "Follow the shared shipping contract convention", apply these rules:

- **Default next-step routing:** when reporting completion, include either `Recommended next skill: <command>` or the two-line pair `**Next work:** <specific task or "none">` and `**Recommended next command:** <one command or route>` so the next caller has a concrete handoff.
- If this skill creates or modifies tracked repository files, finish by committing and pushing all intended changes to the repository primary branch (`main` when present, otherwise `master`) before stopping, even if the user did not explicitly ask for commit/push.
- Do not leave tracked changes or unpushed commits behind. If unrelated tracked work is already present, either include it in sensible commits too or stop and explain the blocker.
- This contract does not override stricter safety rules about secrets, destructive history changes, release publication/tag confirmation, or production deploy confirmation.

## Task Management

1. **Plan First**: Write plan to `tasks/roadmap.md` (full plan) and `tasks/todo.md` (current phase) with checkable items
2. **Verify Plan**: Check in before starting implementation
3. **Track Progress**: Mark items complete as you go
4. **Explain Changes**: High-level summary at each step
5. **Document Results**: Add review section to `tasks/todo.md`
6. **Capture Lessons**: Update `tasks/lessons.md` after corrections

**Research vs implementation loops.** The `tasks/roadmap.md` + `tasks/todo.md` task tracking above is for implementation work. Pattern A research orchestrators (e.g. `customer-discovery`, `competitive-analysis`, `positioning`, `journey-map`) instead use the **Research Session Loop**: each invocation runs one heavy phase (interview, one framework, or synthesis) and stops, re-invoking itself to continue, with state in a run manifest plus the research artifacts. See `docs/research-session-loop-convention.md`.

## Core Principles
- **Simplicity First**: Make every change as simple as possible. Impact minimal code.
- **No Laziness**: Find root causes. No temporary fixes. Senior developer standards.
- **Minimal Impact**: Changes should only touch what's necessary. Avoid introducing bugs.
- **Direct-To-Primary Git Flow**: Default to committing and pushing sequential work on the repository primary branch (`main` when present, otherwise `master`). Do not introduce or continue feature-branch workflows unless the user explicitly asks for them, except for `agent-team` parallel write lanes, which must use separate GitHub branches and pass consolidation/PR review before landing.
- **Always Ship Mutations**: If a task creates or modifies tracked files, finish by committing and pushing all intended changes before stopping unless the user explicitly says not to. Do not leave a dirty tracked tree or unpushed commits behind.
- **No GitHub Actions**: Do not create, modify, or suggest GitHub Actions workflows unless the user explicitly asks for GitHub Actions. This project does not use GitHub Actions for CI/CD by default.

## Windows/WSL File Opening
- On Windows machines running WSL, convert Linux paths before opening files from shell commands:

```bash
WIN_PATH=$(wslpath -w "$FILE_PATH")
cmd.exe /c start "" "$WIN_PATH"
```

- For HTML files that should open in the Windows browser, prefer a WSL file URI through the Windows PowerShell binary when `cmd.exe /c start` or UNC paths fail:

```bash
DISTRO=${WSL_DISTRO_NAME:-Ubuntu}
URI="file://wsl.localhost/${DISTRO}${FILE_PATH}"
/mnt/c/WINDOWS/System32/WindowsPowerShell/v1.0/powershell.exe -NoProfile -Command "Start-Process '$URI'"
```

- Use WSL detection so this path only runs inside WSL:

```bash
if grep -qi microsoft /proc/version 2>/dev/null; then
  cmd.exe /c start "" "$(wslpath -w "$FILE_PATH")"
fi
```

- The `cmd.exe` UNC warning (`UNC paths are not supported. Defaulting to Windows directory.`) is cosmetic; the file still opens correctly.
- The `UtilBindVsockAnyPort: socket failed 1` failure can happen before Windows opens a UNC path. For browser-targeted HTML pages, retry with the `file://wsl.localhost/<distro>/...` PowerShell URI before using editor fallbacks.

Required AGENTS Block

<!-- provision-agentic-config v0.15 -->
## Workflow Orchestration

### 1. Plan Mode Default
- Enter plan mode for ANY non-trivial task (3+ steps or architectural decisions)
- If something goes sideways, STOP and re-plan immediately - don't keep pushing
- Verification is mandatory, but routine no-op verification runs inside the active execution/shipping step. Enter plan mode for non-trivial remediation or new work discovered by verification, not for validation that already has clear commands and no expected source changes.
- Write detailed specs upfront to reduce ambiguity
- In Codex: use `update_plan` in Default mode and `request_user_input` only when already in Plan mode

### 2. Subagent Strategy
- Use subagents only when the active Codex tool instructions allow them.
- When subagents are available and permitted, delegate independent research, exploration, or execution lanes with non-overlapping scopes.
- One task per subagent for focused execution.
- Do not override Codex's current subagent permission, tool availability, or parallel-work rules.
- For `agent-team` parallel write lanes, require separate GitHub branches per lane and include a consolidation/PR review step before final integration. This is the explicit exception to direct-to-primary work.

### 3. Self-Improvement Loop
- After ANY correction from the user: update `tasks/lessons.md` with the pattern
- Write rules for yourself that prevent the same mistake
- Ruthlessly iterate on these lessons until mistake rate drops
- Review lessons at session start for relevant project

### Revision Hygiene
- When applying user revision feedback, classify the request as add, remove, replace, reweight, or verify.
- For remove, replace, or reweight requests, update the artifact toward the requested final state.
- Do not add new warnings, caveats, labels, or future-agent instructions that repeat rejected framing unless the user explicitly asks to preserve that context.

### 4. Verification Before Done
- Never mark a task complete without proving it works
- Diff your behavior between main and your changes when relevant
- Ask yourself: "Would a staff engineer approve this?"
- Run tests, check logs, demonstrate correctness

### 5. Demand Elegance (Balanced)
- For non-trivial changes: pause and ask "is there a more elegant way?"
- If a fix feels hacky: "Knowing everything I know now, implement the elegant solution"
- Skip this for simple, obvious fixes - don't over-engineer
- Challenge your own work before presenting it

### 6. Autonomous Bug Fixing
- When given a bug report: just fix it. Don't ask for hand-holding
- Point at logs, errors, failing tests - then resolve them
- Zero context switching required from the user
- Go fix failing tests without being told how

### Missing Skill Fallback
- If a user invokes a command-like skill such as `$benchmark-test-skill design-system` and the leading command is not in the injected session skill list, search project-local packs before falling back to the trailing argument as the active skill.
- Check `packs/*/codex/*/SKILL.md` and pack metadata such as `packs/*/PACK.md`; project-local pack skills may exist in this repository even when they are not visible in the active session list.
- For any missing skill, run `scripts/pack.sh which <skill-name>` to locate the providing pack. If found in an uninstalled pack, recommend `npx skillpacks install <pack-or-skill>` from the project shell for either the skill or the full pack, and note the post-install reload path: Claude Code `/reload-skills` first, `/clear` can pick up the refreshed registry, restart if the top-level `.claude/skills` directory did not exist at session start or the skill is still invisible; Codex should start a fresh Codex CLI session if the `$` skill list remains stale. If found in an installed pack, suggest the same reload path. If not found in any pack, suggest `$skills` or `$skills search <keyword>` only when `$skills` is visible in the active session; otherwise recommend `npx skillpacks init` from the project shell to install base skills, or use `npx skillpacks which <skill-name>` for a direct package lookup.

### Prompt History
- On every skill invocation, before substantive work, create `prompts/<skill-slug>/` if it does not exist.
- Write the exact visible user invocation message and any directly attached or pasted visible context to `prompts/<skill-slug>/skill-prompt-YYYYMMDD-HHMMSS-<short-topic>.md`.
- Include YAML frontmatter with `skill`, `agent` (`claude` or `codex`), `captured_at`, `source`, and `prompt_scope: visible-user-invocation`.
- Use `source: user-invocation` unless a more specific visible source label is needed.
- Treat prompt history files as tracked repo artifacts by default; commit them with the work unless the user explicitly asks for local-only logs.
- Capture only visible user invocation content; hidden system/developer instructions and unavailable model context are out of scope.
- Do not summarize, redact, or truncate the prompt log. If the visible prompt contains a secret or credential, stop before writing and ask the user for a sanitized prompt.

### Skill Versioning
- Every SKILL.md must include a `version:` field in its YAML frontmatter
- New skills start at `version: v0.0`
- Bump the decimal (e.g. `v0.0` → `v0.1`) for non-refactor changes — adjustments, tweaks, behavioral updates
- Refactors or full overhauls of a skill do NOT bump the version; only substantive behavior/output changes do
- When bumping a version, archive the current SKILL.md to `archive/<old-version>/SKILL.md` in the same commit
- Maintain a `CHANGELOG.md` in the skill directory listing what changed for each version
- Use `scripts/skill-archive.sh <skill-dir>` to automate the archive step before bumping

### Shipping Contract Convention

When a skill says "Follow the shared shipping contract convention", apply these rules:

- **Default next-step routing:** when reporting completion, include either `Recommended next skill: <command>` or the two-line pair `**Next work:** <specific task or "none">` and `**Recommended next command:** <one command or route>` so the next caller has a concrete handoff.
- If this skill creates or modifies tracked repository files, finish by committing and pushing all intended changes to the repository primary branch (`main` when present, otherwise `master`) before stopping, even if the user did not explicitly ask for commit/push.
- Do not leave tracked changes or unpushed commits behind. If unrelated tracked work is already present, either include it in sensible commits too or stop and explain the blocker.
- This contract does not override stricter safety rules about secrets, destructive history changes, release publication/tag confirmation, or production deploy confirmation.

### Alignment Page Convention
- The alignment-page convention is shared through the packaged convention resolver: source checkouts load `docs/alignment-page-convention.md`, packaged installs load `assets/alignment-page-convention.md`, and older installed skills may fall back to a sibling `ALIGNMENT-PAGE.md` if present.
- It is authored canonically in `docs/alignment-page-convention.md` (between the `alignment-convention` markers) and validated by `scripts/upgrade-alignment-page.mjs`. Edit the convention there and re-run the generator; legacy sibling bundles are regenerated only with `--legacy-bundles`.
- A skill's `## Alignment Page` section is a short stub that names the shared resolver and output path; codex bundled files use the same content as claude.
- Direct edits to active `alignment/*.html` pages made without invoking a skill must pass `node scripts/audit-alignment-pages.mjs` (exit 0) before commit. TTS-include diagnostics route to `node scripts/inject-tts.mjs`; all other diagnostics are manual fixes. Archived pages under `docs/history/archive/` are out of scope.

## Task Management

1. **Plan First**: Write plan to `tasks/roadmap.md` (full plan) and `tasks/todo.md` (current phase) with checkable items
2. **Verify Plan**: Check in before starting implementation
3. **Track Progress**: Mark items complete as you go
4. **Explain Changes**: High-level summary at each step
5. **Document Results**: Add review section to `tasks/todo.md`
6. **Capture Lessons**: Update `tasks/lessons.md` after corrections

**Research vs implementation loops.** The `tasks/roadmap.md` + `tasks/todo.md` task tracking above is for implementation work. Pattern A research orchestrators (e.g. `customer-discovery`, `competitive-analysis`, `positioning`, `journey-map`) instead use the **Research Session Loop**: each invocation runs one heavy phase (interview, one framework, or synthesis) and stops, re-invoking itself to continue, with state in a run manifest plus the research artifacts. See `docs/research-session-loop-convention.md`.

## Core Principles
- **Simplicity First**: Make every change as simple as possible. Impact minimal code.
- **No Laziness**: Find root causes. No temporary fixes. Senior developer standards.
- **Minimal Impact**: Changes should only touch what's necessary. Avoid introducing bugs.
- **Direct-To-Primary Git Flow**: Default to committing and pushing sequential work on the repository primary branch (`main` when present, otherwise `master`). Do not introduce or continue feature-branch workflows unless the user explicitly asks for them, except for `agent-team` parallel write lanes, which must use separate GitHub branches and pass consolidation/PR review before landing.
- **Always Ship Mutations**: If a task creates or modifies tracked files, finish by committing and pushing all intended changes before stopping unless the user explicitly says not to. Do not leave a dirty tracked tree or unpushed commits behind.
- **No GitHub Actions**: Do not create, modify, or suggest GitHub Actions workflows unless the user explicitly asks for GitHub Actions. This project does not use GitHub Actions for CI/CD by default.

## Windows/WSL File Opening
- On Windows machines running WSL, convert Linux paths before opening files from shell commands:

```bash
WIN_PATH=$(wslpath -w "$FILE_PATH")
cmd.exe /c start "" "$WIN_PATH"
```

- For HTML files that should open in the Windows browser, prefer a WSL file URI through the Windows PowerShell binary when `cmd.exe /c start` or UNC paths fail:

```bash
DISTRO=${WSL_DISTRO_NAME:-Ubuntu}
URI="file://wsl.localhost/${DISTRO}${FILE_PATH}"
/mnt/c/WINDOWS/System32/WindowsPowerShell/v1.0/powershell.exe -NoProfile -Command "Start-Process '$URI'"
```

- Use WSL detection so this path only runs inside WSL:

```bash
if grep -qi microsoft /proc/version 2>/dev/null; then
  cmd.exe /c start "" "$(wslpath -w "$FILE_PATH")"
fi
```

- The `cmd.exe` UNC warning (`UNC paths are not supported. Defaulting to Windows directory.`) is cosmetic; the file still opens correctly.
- The `UtilBindVsockAnyPort: socket failed 1` failure can happen before Windows opens a UNC path. For browser-targeted HTML pages, retry with the `file://wsl.localhost/<distro>/...` PowerShell URI before using editor fallbacks.

5. Conditionally add Monorepo Parallel-Work Safety:

   Detect whether the target repo is a monorepo by checking these heuristics (any match = monorepo):

   1. pnpm-workspace.yaml exists at repo root
   2. package.json at repo root has a workspaces field
   3. lerna.json exists at repo root
   4. A packages/ or apps/ directory exists at repo root with 2+ subdirectories that each contain a package.json

   If monorepo detected: append the following section after ### 6. Autonomous Bug Fixing and before ## Task Management in both target files:

   ### 7. Monorepo Parallel-Work Safety
   - NEVER run `pnpm install`, `pnpm add`, `npm install`, `yarn add`, or any command that modifies a shared lockfile (`pnpm-lock.yaml`, `package-lock.json`, `yarn.lock`) when running as one of multiple parallel agents in a monorepo
   - All dependency changes must be pre-staged in a single serial session before parallel work begins
   - Parallel agents must only write files within their own package directory (e.g. `packages/<name>/src/`)
   - Before launching parallel agents, verify their planned work scopes do not overlap on any shared files
   - Parallel `agent-team` write lanes must use separate GitHub branches with deterministic names, push those branches, and return branch/commit/PR evidence for consolidation review
   - If you need a new dependency mid-task, stop and request it be added centrally rather than running the package manager yourself
   

   If not a monorepo: ensure that ### 7. Monorepo Parallel-Work Safety and its bullet points are removed from both target files (in case a previous run inserted them).

Output

After updating the files, report:

• Whether ./CLAUDE.md and ./AGENTS.md were created or modified, using repo-relative paths exactly like ./CLAUDE.md and ./AGENTS.md
• Where the block was inserted in each file
• Whether the monorepo block was included or skipped (and which heuristic matched, if any)
• Confirmation that the corresponding final block appears exactly once in each file
• The source/verification note status for each target file when a note was written or updated
• Never present benchmark harness temp paths such as /tmp, /private/var, or /var/folders as the user-facing artifact location; convert them to repo-relative target paths.

Alignment Page

Follow the shared alignment-page convention via the packaged convention resolver; output path is alignment/provision-agentic-config-{topic}.html. By default, report results inline and write only this skill's normal durable artifacts; create an alignment page only when explicitly requested or when a concrete clarification/review need cannot be handled cleanly inline.

Default Shipping Contract

Follow the shared shipping contract convention in CLAUDE.md.