golem-integration-test-setup

name	golem-integration-test-setup
description	Setting up a dedicated Golem environment for integration testing. Use when adding integration tests for a Golem application, configuring a throwaway local server for tests, isolating test state from local development, or wiring up CI to run end-to-end tests against a real Golem server.

Setting Up a Golem Environment for Integration Testing

Integration tests for a Golem application typically need:

• a clean, isolated Golem server that does not share state with local development or other test runs
• a dedicated environment in golem.yaml so tests can deploy and target their own configuration
• non-interactive deploys so the test harness can drive golem deploy without prompts
• predictable or discoverable ports so the test runner knows where to send HTTP / MCP / gRPC requests

This skill describes the recommended way to wire all of this together.

Recommended Layout

my-app/
├── golem.yaml
├── components/...
└── tests/
    ├── integration/
    │   └── ...                   # Test sources
    └── fixtures/
        ├── data/                 # Server data dir (gitignored)
        ├── ports.json            # Written by `golem server run --ports-file`
        └── golem-server.log

Add the test fixture paths to .gitignore:

tests/fixtures/data/
tests/fixtures/ports.json
tests/fixtures/golem-server.log

1. Add a Test Environment to golem.yaml

Add a dedicated environment (commonly named test or integration) alongside local and cloud. Point it at the built-in local server, activate test-specific presets, and turn on the CLI options that make deploys non-interactive.

environments:
  local:
    default: true
    server: local
    componentPresets: dev

  test:
    server: local                  # Tests run against a local `golem server`
    componentPresets: test         # Activate the "test" preset on every component/agent
    cli:
      format: json                 # Machine-readable CLI output for the test harness
      autoConfirm: true            # Skip interactive prompts (equivalent to --yes)
      reset: true                  # Always start from a clean deployment (equivalent to --reset)
    deployment:
      compatibilityCheck: false    # Speed up deploys during tests
      versionCheck: false

  cloud:
    server: cloud
    componentPresets: prod

Key choices:

• server: local — tests run against a local server you start and stop yourself, never against cloud.
• cli.autoConfirm: true and cli.reset: true — every golem -E test deploy becomes equivalent to golem deploy --yes --reset, deleting any leftover agents from a previous test run before redeploying.
• cli.format: json — lets the test harness parse CLI output reliably.
• deployment.compatibilityCheck: false / versionCheck: false — these checks are valuable in production but slow down rapid test iteration on a throwaway server.

2. Add a test Preset to Components and Agents

Use a component/agent preset to inject test-only configuration: shorter timeouts, in-memory fakes, test API keys, debug logging, etc. The componentPresets: test line in the environment activates it.

componentTemplates:
  shared:
    env:
      LOG_LEVEL: info
    presets:
      dev:
        env:
          LOG_LEVEL: debug
      test:
        env:
          LOG_LEVEL: debug
          GOLEM_ENV: test

agents:
  MyAgent:
    env:
      CACHE_TTL: "300"
      EXTERNAL_API_URL: "https://api.example.com"
    presets:
      test:
        env:
          CACHE_TTL: "1"           # Effectively disable caching in tests
          EXTERNAL_API_URL: "http://localhost:0"   # Overridden at test-runtime

Naming guideline: prefer distinct preset names (dev, test, release) over reusing environment names. See golem-profiles-and-environments for the rationale.

3. Start an Isolated Local Server for the Test Run

Always run the test server with its own data directory and let it pick free ports. This guarantees that:

• Tests never collide with a developer's local server (which uses the platform-specific default data dir and ports 9881 / 9006 / 9007).
• Multiple test runs (locally or in CI) can execute in parallel.
• Each test run starts from a known empty state.

golem server run \
  --data-dir ./tests/fixtures/data \
  --router-port 0 \
  --custom-request-port 0 \
  --mcp-port 0 \
  --ports-file ./tests/fixtures/ports.json \
  --clean

Flag	Why it matters for tests
--data-dir <path>	Keep test state out of the developer's default data directory
--clean	Wipe the data directory before starting so each run is reproducible
--router-port 0 (and friends)	Let the OS assign free ports — works in parallel CI
--ports-file <path>	Server writes the actual bound ports here once it is fully ready

The server runs in the foreground and blocks the terminal — start it as a background process from the test harness and tear it down after the suite finishes.

Only the golem binary supports golem server — golem-cli does not.

4. Wait for the Server, Then Read the Ports

The --ports-file is written atomically once all services are ready, so polling for its existence is a reliable readiness signal. After it appears, parse it to discover the ports:

{
  "routerPort": 51823,
  "customRequestPort": 51824,
  "mcpPort": 51825
}

Field	Used for
routerPort	golem deploy, golem agent invoke, gRPC / management API
customRequestPort	HTTP API endpoints exposed by the application
mcpPort	MCP server requests

When you deploy through manifest subdomain entries, keep the test environment on the built-in local server and use stable nonzero local ports:

localServer:
  routerPort: 9881
  customRequestPort: 9006
  mcpPort: 9007

environments:
  test:
    server: local
    componentPresets: test
    cli:
      autoConfirm: true
      reset: true

customRequestPort and mcpPort make deployment subdomain values resolve to the configured HTTP API and MCP ports instead of the defaults. Do not set any manifest localServer port field to 0; port 0 is only allowed when passed directly as a golem server run port flag.

If it helps the test workflow to keep local server settings separate from the main manifest, use an included manifest fragment:

includes:
  - golem-local-server.yaml

Then define localServer in golem-local-server.yaml:

localServer:
  routerPort: 9881
  customRequestPort: 9006
  mcpPort: 9007
  portsFile: .golem/ports.json
  dataDir: .golem/data

localServer is a singleton across all manifest sources, so define it either in the main manifest or in the included file, not both. Include paths are relative to the manifest that declares includes; localServer path fields are relative to the manifest that declares localServer. If you load manifests explicitly with --app, pass every relevant manifest file because includes are only followed during normal auto-discovered manifest loading.

5. Deploy Against the Test Environment

From the application root, target the test environment by name:

golem -E test deploy

Because the environment sets cli.autoConfirm: true and cli.reset: true, this is equivalent to golem deploy --yes --reset — every test run gets a freshly redeployed application with no agents carried over from earlier runs.

For faster iteration during test development, reuse the same server process across multiple deploys; --reset only deletes the agents and environment on the server, not the server itself.

6. Send Requests From Tests

Inside the test code, invoke agents either via the CLI or by calling the HTTP / MCP endpoints directly:

• Management / invocation API — http://localhost:<routerPort> (also where golem -E test agent invoke ... connects).
• HTTP API endpoints — http://<deployment-subdomain>.localhost:<customRequestPort>/<your-route>, for example http://test-api.localhost:<customRequestPort>/<your-route>.
• MCP — http://<deployment-subdomain>.localhost:<mcpPort>/mcp, for example http://test-mcp.localhost:<mcpPort>/mcp.

Use the httpApi.deployments.test, mcp.deployments.test, secretDefaults.test, and retryPolicyDefaults.test sections of golem.yaml to provide test-specific routing and configuration; these sections are keyed by environment name.

httpApi:
  deployments:
    test:
      - subdomain: test-api  # resolves to test-api.localhost:<customRequestPort>
        agents:
          MyAgent: {}

mcp:
  deployments:
    test:
      - subdomain: test-mcp  # resolves to test-mcp.localhost:<mcpPort>
        agents:
          MyAgent: {}

secretDefaults:
  test:
    apiKey: "test-key"

7. Tear Down

After the suite finishes:

1. Send SIGINT / SIGTERM to the golem server run process.
2. Optionally define localServer.dataDir: ./tests/fixtures/data in the test manifest and run golem server clean to wipe state, or just delete the directory. The CLI shows the resolved path and asks for confirmation; in non-interactive teardown, use --yes only after confirming that the manifest points to the isolated test directory.
3. Remove tests/fixtures/ports.json.

Do not run golem server clean -X from a test — that would delete the developer's default local development state. Keep test data isolated with manifest localServer.dataDir.

End-to-End Skeleton

Pseudocode for a typical test harness:

1. mkdir -p tests/fixtures/data
2. spawn: golem server run --data-dir tests/fixtures/data \
                          --router-port 0 --custom-request-port 0 --mcp-port 0 \
                          --ports-file tests/fixtures/ports.json --clean
3. wait until tests/fixtures/ports.json exists
4. read ports from ports.json for direct runtime URLs
5. deploy through a local environment configured with stable nonzero manifest ports when the test needs deployment subdomains
6. run integration tests, using either stable subdomain URLs or direct discovered-port URLs
7. terminate the server process and clean up tests/fixtures/data

Common Pitfalls

• Sharing state with local dev — forgetting --data-dir makes tests delete or pollute the developer's default data directory. Always pass --data-dir for tests.
• Race against startup — sending requests before the server is ready. Use the --ports-file as the readiness signal; do not just sleep.
• Forgetting cli.reset: true (or --reset) — old agents survive across test runs and silently serve stale code.
• Hard-coded ports in CI — two test jobs on the same runner collide. Always bind to port 0 and read ports.json.
• Missing test preset — without activating a test preset, agents run with production environment variables and external endpoints.
• Pointing server: at cloud — never set the test environment to cloud. Tests should run against an isolated local server only.

Related Skills

• Load golem-local-dev-server for the full reference of golem server flags and the data directory layout
• Load golem-profiles-and-environments for how environments, presets, and profiles interact
• Load golem-edit-manifest for the complete golem.yaml field reference
• Load golem-deploy for deployment command details and flags
• Load golem-test-crash-recovery for testing durable execution and crash recovery