pipeline

name	pipeline
description	Run the adversarial plan-implement-review pipeline. Spawns agents for each role with their own context windows. Use after /brainstorm, /repo-eval, /repo-health, or /doc-health has produced a starting doc.
allowed-tools	Agent, Read, Write, Glob, Grep, Bash, Edit

Pipeline Orchestrator

You coordinate the adversarial development pipeline. Each role runs as a separate agent with a fresh context window. Your job is to spawn agents, read their signals, and route work accordingly.

Read pipeline-protocol.md for the full signal protocol before starting.

Input

$ARGUMENTS is the plan identifier in YYYY-MM-DD-slug format (e.g., 2026-03-12-user-auth). Plan files live at docs/plans/$ARGUMENTS/.

Pre-Flight & Type Detection

1. Read pipeline-protocol.md to load the signal protocol
2. Detect pipeline type by checking which intake document exists at docs/plans/$ARGUMENTS/:

+-------------------------------------------------------------------+
|                    PIPELINE TYPE ROUTING                           |
+-------------------------------------------------------------------+
|                                                                   |
|  Check which intake docs exist at docs/plans/$ARGUMENTS/:         |
|                                                                   |
|  brainstorm.md exists?    → type: feature (default flow below)    |
|  Multiple audit docs?     → type: audit (unified plan)            |
|  health-audit.md only?    → type: repo-health                     |
|  eval.md only?            → type: repo-eval                       |
|  doc-audit.md only?       → type: doc-health                      |
|  none found?              → tell user to run an intake skill      |
|                                                                   |
+-------------------------------------------------------------------+

Each pipeline type uses a distinct intake filename — no frontmatter parsing needed for routing.

1. Glob for all intake docs at docs/plans/$ARGUMENTS/ to determine which exist
2. If brainstorm.md exists: it runs alone — continue with the feature flow stages below. If audit docs also exist, warn the user that audit docs will be ignored and suggest using a separate plan directory for audit work.
3. If multiple non-feature intake docs exist (any combination of health-audit.md, eval.md, doc-audit.md): Read flows/audit-flow.md and follow it. This creates ONE unified plan across all audit types. Stop reading this file and follow the flow file.
4. If exactly one non-feature intake doc exists: read the corresponding flow file and follow it. Stop reading this file and follow the flow file.
5. If none found: tell the user to run an intake skill first

Stage 0: Pipeline State Recovery

Before starting any stage, detect prior progress to determine the correct entry point:

1. Check for plan approval: Read docs/plans/$ARGUMENTS/feedback.md (if it exists) for a PLAN_APPROVED signal or resolved PLAN_REVIEW entries with no remaining OPEN PLAN_REVIEW items
2. Check for phase progress: Look for PHASE_APPROVED, OPEN/resolved CODE_REVIEW entries, and implementation commits (see Stage 2 State Recovery)
3. Check for final review: Look for GO or NO-GO entries tagged FINAL_REVIEW

Based on findings:

• GO or NO-GO in feedback.md → pipeline already completed, report result to user and stop
• PHASE_APPROVED for all phases → skip to Stage 3 (Final Review)
• Any phase progress exists + PLAN_APPROVED → skip to Stage 2 at the correct phase (see State Recovery below)
• Plan files exist + OPEN PLAN_REVIEW feedback → enter Stage 1 at revision step (1a with revision instructions)
• Plan files exist + no feedback.md or no review entries → enter Stage 1 at review step (1b)
• No plan files → enter Stage 1 from the start (1a)

Report the detected state to the user before continuing.

Stage 1: Planning (Planner ↔ Plan Reviewer Adversarial Loop)

Max iterations: 3. If not approved after 3 cycles, stop and surface the unresolved issues to the user.

One Planner agent and one Plan Reviewer agent for the entire planning stage. Spawn each once, then use SendMessage for subsequent iterations.

1a: Spawn Planner (once)

• Read planner.md to load the role prompt
• Spawn an Agent — note its agent ID for later SendMessage:

<role_prompt>
[Contents of planner.md]
</role_prompt>

<task>
Version: $ARGUMENTS
Brainstorm document: docs/plans/$ARGUMENTS/brainstorm.md

Read the brainstorm document, explore the codebase, and create the implementation plan files at docs/plans/$ARGUMENTS/.

Remember to create feedback.md with the empty template structure.

When complete, end your response with: PLAN_COMPLETE
</task>

• Wait for the agent to complete
• Verify PLAN_COMPLETE is in the result

1b: Spawn Plan Reviewer (once)

• Read plan_reviewer.md to load the role prompt
• Spawn an Agent — note its agent ID for later SendMessage:

<role_prompt>
[Contents of plan_reviewer.md]
</role_prompt>

<task>
Version: $ARGUMENTS
Plan location: docs/plans/$ARGUMENTS/

Review the implementation plan. Verify file existence with Glob. Check dependencies, actionability, and testing strategy.

If issues found: write feedback to docs/plans/$ARGUMENTS/feedback.md tagged PLAN_REVIEW, then end with: REVISION_REQUIRED
If plan is good: end with: PLAN_APPROVED
</task>

1c: Iteration Loop

• Check the reviewer's signal:
  • PLAN_APPROVED → proceed to Stage 2
  • REVISION_REQUIRED → use SendMessage to the SAME Planner agent (by ID):

The Plan Reviewer has requested revisions. Read docs/plans/$ARGUMENTS/feedback.md for OPEN items tagged PLAN_REVIEW.

Address each item by revising the plan files. Move resolved feedback to the "Resolved Feedback" section with a resolution note.

When complete, end your response with: PLAN_COMPLETE

• After the planner responds, use SendMessage to the SAME Plan Reviewer agent (by ID):

The Planner has revised the plan. Re-review the changes:
1. Check that OPEN PLAN_REVIEW items in feedback.md were resolved
2. Verify file existence with Glob
3. Re-check dependencies and actionability

If new issues found: write new feedback, end with: REVISION_REQUIRED
If all resolved: end with: PLAN_APPROVED

• Loop until PLAN_APPROVED or max iterations (3) reached
• NEVER spawn a new Planner or Plan Reviewer agent during this stage. Always use SendMessage to continue the existing agents.

Between Stages - Report to User

After plan approval, report:

Plan approved after N iteration(s).
Phases identified: [list phases found]
Starting implementation...

Stage 2: Implementation (Per-Phase Implementer ↔ Reviewer Adversarial Loop)

Max iterations per phase: 3. If not approved after 3 cycles, stop and surface issues.

Identify all phases by using Glob for docs/plans/$ARGUMENTS/Phase-*.md (excluding Phase-0). Process them in sequential order.

State Recovery (Resume Detection)

Before processing phases, determine each phase's completion state. For each Phase-N:

1. Read docs/plans/$ARGUMENTS/feedback.md and check for:
   • A PHASE_APPROVED entry for Phase N → phase is done, skip it
   • OPEN CODE_REVIEW items for Phase N → phase needs review fixes, enter at step 2a (Implementer) with revision instructions
   • Resolved CODE_REVIEW items for Phase N but no PHASE_APPROVED → phase needs re-review, enter at step 2b (Reviewer)
2. Check git log --oneline for commits referencing Phase N (e.g., phase-N, Phase N, phase N)
   • Commits exist but no feedback.md review entries → phase was implemented but never reviewed, enter at step 2b (Reviewer)
   • No commits and no feedback entries → phase is not started, enter at step 2a (Implementer)

A phase is only skip-eligible when feedback.md contains a PHASE_APPROVED record for it. Implementation commits alone are not sufficient.

Report the recovered state to the user before continuing:

Resume state for $ARGUMENTS:
- Phase 1: [done | needs review | needs review fixes | needs implementation | not started]
- Phase 2: [...]
Continuing from Phase N...

For each Phase-N

One Implementer agent and one Reviewer agent per phase. Spawn each once, then use SendMessage to continue the same agent for subsequent iterations. This preserves context — the reviewer doesn't re-read Phase-0 and Phase-N from scratch on each iteration.

2a: Spawn Implementer (once per phase)

• Read implementer.md to load the role prompt
• Spawn an Agent — note its agent ID for later SendMessage:

<role_prompt>
[Contents of implementer.md]
</role_prompt>

<task>
Version: $ARGUMENTS
Phase: N

Read these files in order:
1. docs/plans/$ARGUMENTS/README.md
2. docs/plans/$ARGUMENTS/Phase-0.md
3. docs/plans/$ARGUMENTS/Phase-N.md
4. docs/plans/$ARGUMENTS/feedback.md (check for OPEN CODE_REVIEW items)

Implement all tasks in Phase-N following TDD. Make atomic commits.

When complete, end your response with: IMPLEMENTATION_COMPLETE
</task>

2b: Spawn Reviewer (once per phase)

• Read reviewer.md to load the role prompt
• Spawn an Agent — note its agent ID for later SendMessage:

<role_prompt>
[Contents of reviewer.md]
</role_prompt>

<task>
Version: $ARGUMENTS
Phase: N

Review the Phase N implementation:
1. Read docs/plans/$ARGUMENTS/Phase-0.md first (architecture source of truth)
2. Read docs/plans/$ARGUMENTS/Phase-N.md (the spec)
3. Verify implementation matches spec using Read, Glob, Grep
4. Run tests and build with Bash
5. Check git commits

If issues found: write feedback to docs/plans/$ARGUMENTS/feedback.md tagged CODE_REVIEW, then end with: CHANGES_REQUESTED
If implementation is good: end with: PHASE_APPROVED
</task>

2c: Iteration Loop

• Check the reviewer's signal:
  • PHASE_APPROVED → report to user, move to next phase
  • CHANGES_REQUESTED → use SendMessage to the SAME Implementer agent (by ID):

The Code Reviewer has requested changes. Read docs/plans/$ARGUMENTS/feedback.md for OPEN items tagged CODE_REVIEW.

Address each item. Move resolved feedback to "Resolved Feedback" with a resolution note. Continue following TDD.

When complete, end your response with: IMPLEMENTATION_COMPLETE

• After the implementer responds, use SendMessage to the SAME Reviewer agent (by ID):

The Implementer has addressed the feedback. Re-review the changes:
1. Check that OPEN CODE_REVIEW items in feedback.md were resolved
2. Run tests and build
3. Verify fixes are correct

If new issues found: write new feedback, end with: CHANGES_REQUESTED
If all resolved: end with: PHASE_APPROVED

• Loop until PHASE_APPROVED or max iterations (3) reached
• NEVER spawn a new Implementer or Reviewer agent for the same phase. Always use SendMessage to continue the existing agents.

Between Phases

Phase N approved after M iteration(s).
Remaining phases: [list]

Stage 3: Final Review

After all phases are approved:

• Read final_reviewer.md to load the role prompt
• Spawn an Agent with:

<role_prompt>
[Contents of final_reviewer.md]
</role_prompt>

<task>
Version: $ARGUMENTS
Plan location: docs/plans/$ARGUMENTS/

Conduct the final comprehensive review:
1. Run the full test suite
2. Verify spec compliance across all phases — read each Phase-N.md and verify every task has corresponding code
3. Check integration points between phases
4. Scan for security issues, dead code, and tech debt
5. Produce the Production Readiness Dashboard

If ready: end with: GO
If not ready: write feedback to docs/plans/$ARGUMENTS/feedback.md tagged FINAL_REVIEW, categorize issues as plan-level or implementation-level, then end with: NO-GO
</task>

• Check the signal:
  • GO → report success to user
  • NO-GO → report issues to user with the final reviewer's assessment. Do not automatically re-enter the loop. Let the user decide next steps.

Completion

Log to Manifest

Before reporting the final verdict, append an entry to .claude/skill-runs.json in the repo root. If the file does not exist, create it with an empty array first.

{
  "skill": "pipeline",
  "date": "YYYY-MM-DD",
  "plan": "$ARGUMENTS",
  "verdict": "GO | NO-GO | MAX_ITERATIONS"
}

• verdict: the final outcome of this pipeline run
• Read the existing file, parse the JSON array, append the new entry, and write it back
• If the file is malformed, overwrite it with a fresh array containing only the new entry

On GO

Pipeline complete for $ARGUMENTS.

Final verdict: GO — Production Ready

Stages completed:
- Plan: approved in N iteration(s)
- Phase 1: approved in M iteration(s)
- Phase 2: approved in M iteration(s)
- ...
- Final review: GO

All code is committed and ready for deployment.

On NO-GO

Pipeline stopped for $ARGUMENTS.

Final verdict: NO-GO

The final reviewer identified issues in docs/plans/$ARGUMENTS/feedback.md tagged FINAL_REVIEW.

[Summary of issues categorized as plan-level vs implementation-level]

Options:
A) Address the issues and re-run: /pipeline $ARGUMENTS
B) Review feedback manually: read docs/plans/$ARGUMENTS/feedback.md
C) Ship with caveats (if issues are minor)

NO-GO Re-Entry Path: When the user re-runs /pipeline $ARGUMENTS after a NO-GO, the State Recovery (Stage 0) detects the NO-GO in feedback.md and routes rework based on the final reviewer's categorization:

• Plan-level issues (architecture flaw, missing phase): Re-enter at Stage 1 (Planner) with revision instructions referencing the FINAL_REVIEW feedback
• Implementation-level issues (bug, missing test, security): Re-enter at Stage 2 at the affected phase(s), spawning the Implementer with FINAL_REVIEW feedback items as CODE_REVIEW rework
• Mixed issues: Plan-level first, then implementation-level

The orchestrator should update the NO-GO status in feedback.md to REWORK_IN_PROGRESS to distinguish active rework from a fresh pipeline run.

On Max Iterations Reached

Pipeline paused for $ARGUMENTS.

The [Planner ↔ Plan Reviewer | Implementer ↔ Reviewer] loop for [Phase N] did not converge after 3 iterations.

Unresolved feedback in docs/plans/$ARGUMENTS/feedback.md.

Options:
A) Review feedback and provide guidance, then re-run
B) Manually resolve and continue

Rules

Agent Spawning

• ONE agent at a time. Every stage runs a single foreground agent. Wait for it to complete fully before deciding the next step.
• ONE Implementer and ONE Reviewer per phase. Spawn each once, then use SendMessage (by agent ID) for subsequent iterations. Never spawn a new agent for the same role within a phase.
• NO duplicate or replacement agents. If an agent is slow, wait. Agents can take 20+ minutes on large codebases. Do NOT spawn a second agent for the same work.
• NO per-phase planners. The Planner creates ALL phases (Phase-0 through Phase-N) in ONE agent spawn. Never decompose planning into separate agents per phase.
• NO parallel agents. This pipeline is strictly sequential: Planner → wait → Plan Reviewer → wait → Implementer → wait → Reviewer → wait. Never overlap stages.
• NO background agents. Every agent spawn must be foreground. Wait for the result before proceeding.

Pipeline Integrity

• NEVER run tests, linters, builds, or CI yourself — not even in the background. Agents handle all validation within their own execution. The orchestrator only spawns agents, reads signals, and routes work.
• NEVER answer your own questions. When you present options to the user (A/B/C), STOP and WAIT for their response. Do not choose an option on their behalf.
• NEVER modify source code yourself — only agents do that
• NEVER skip the Plan Reviewer — every plan gets reviewed
• NEVER skip the Code Reviewer — every implementation gets reviewed
• NEVER continue past a NO-GO without user input
• DO read each role prompt file fresh before spawning — don't cache from memory
• DO report progress between stages so the user knows what's happening
• DO include the full role prompt contents in each agent's prompt (the agent has no access to the skill directory files)
• DO respect the max iteration limits — surface persistent issues to the user rather than looping forever