· Create/troubleshoot VMs and hypervisors: Proxmox, QEMU/KVM, libvirt, XCP-ng, vSphere. Triggers: 'proxmox', 'qemu', 'kvm', 'libvirt', 'virsh', 'vm', 'hypervisor', 'cloud-init', 'xcp-ng'. Not for containers (use docker).
Installation
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Virtualization: Hypervisors, VMs, and Infrastructure
Create, configure, and manage virtual machines across hypervisors - from single-node Proxmox
setups to multi-node clusters with HA, live migration, and GPU passthrough. The goal is
production-ready VM infrastructure with correct storage, memory, and CPU config that won't
bite you at 3 AM.
Target versions (verified June 2026):
Tool
Version
Release date
Notes
Proxmox VE
9.1
Nov 2025
Debian 13.2 (trixie), kernel 6.17.2, QEMU 10.1.2
Proxmox Backup Server
4.1
Nov 2025
Dedup, incremental, prune policies
bpg/proxmox (Terraform)
0.109.0
Jun 2026
Primary Proxmox IaC provider
QEMU
11.0.1
Apr 2026
Stable (11.0 series; GA Apr 22, 2026)
libvirt
12.4.0
Jun 2026
Hypervisor abstraction layer
XCP-ng
8.3 LTS
Oct 2024
Xen-based, LTS since Jun 2025, EOL Nov 2028
VMware ESXi
8.0 U3i
Feb 2026
Broadcom-owned, licensing upheaval
VirtualBox
7.2.6
Jan 2026
Dev/testing only
Packer
1.15.1
Mar 2026
Image builder, multi-platform
cloud-init
26.1
Feb 2026
Instance initialization standard
When to use
Creating or configuring VMs on Proxmox, libvirt/KVM, XCP-ng, or VMware
Provisioning Proxmox VMs with Terraform (bpg/proxmox provider)
Building VM templates with Packer and cloud-init
Configuring PCI/GPU passthrough for compute or display GPUs
AI tools consistently produce the same VM configuration mistakes. Before returning any
generated VM config, Terraform HCL, or Packer template, verify against this list:
No hardcoded IPs, passwords, or SSH keys - use variables or cloud-init injection
Disk interface is virtio (scsi0 with virtio-scsi controller), not IDE, unless legacy OS
iothread = true on virtio-scsi disks for SSD-backed storage
ssd = true emulation enabled when backing store is SSD (enables guest TRIM)
discard = on on QEMU disk config for thin-provisioned storage (fstrim passthrough)
Memory ballooning disabled unless tested on the specific guest OS (Alpine, some BSDs can't
hotplug DIMMs - balloon changes need full power-cycle, not reboot)
In bpg/proxmox Terraform: ballooning is disabled by setting the provider's minimum-memory/balloon field to 0 (verify exact key in the bpg/proxmox docs - commonly memory_min_mb or balloon; do not invent a field name without checking)
CPU type is host for production (full feature passthrough), not kvm64/qemu64
NUMA enabled for multi-socket or large-memory VMs
QEMU guest agent enabled (cloud-init installs it, but verify)
Cloud-init interface specified (bpg/proxmox defaults to ide2 when null)
Terraform lifecycle: prevent_destroy on VMs, ignore_changes on disk and node_name
No disk resize via Terraform - use qm resize on host, then update Terraform var to match
PCI passthrough: pcie = false for standard passthrough, xvga = false unless display GPU
PCI passthrough: machine type is q35 when pcie = true is needed
GPU passthrough: AMD GPUs are prone to reset bugs (vendor-reset kernel module or pcie_port_pm=off may be required); NVIDIA generally resets cleanly but verify with your card model before production use
BIOS type matches use case: seabios default, ovmf for UEFI/Secure Boot/Windows 11
Network device uses virtio model, not e1000 or rtl8139
fstrim.timer enabled in guest for thin-provisioned storage (completes the discard chain)
SCSI controller explicitly set (virtio-scsi-single for high IOPS, virtio-scsi-pci default)
Machine type matches BIOS: i440fx with seabios, q35 with ovmf (UEFI). Mixing
i440fx + ovmf causes boot failures. q35 + seabios works but wastes q35 features.
VGA type matches use case: serial0 for headless cloud images, virtio for GUI VMs,
omit for PCI passthrough display GPUs (x-vga=1 replaces the virtual display)
Current source checked: dated versions, CLI flags, API names, and support windows are verified against primary docs before repeating them
Hidden state identified: local config, credentials, caches, contexts, branches, cluster targets, or previous runs are made explicit before acting
Verification is real: final checks exercise the actual runtime, parser, service, or integration point instead of only linting prose or happy paths
Routing overlap checked: overlapping skills, trigger terms, and "When NOT to use" boundaries are checked before returning guidance
Spec claims verified: claims about tool behavior, output contracts, or repo conventions are checked against current docs, scripts, or skill files
Hypervisor/version checked: Proxmox, QEMU/KVM, libvirt, XCP-ng, vSphere, and cloud-init advice matches the target platform
Storage risk gated: disk format, snapshot, passthrough, and migration commands preserve data and rollback
Performance
Choose storage format and cache mode based on workload: latency, snapshots, thin provisioning, and backup behavior differ.
Right-size vCPU, NUMA, memory ballooning, and I/O queues from measured host pressure.
Use templates and cloud-init for repeatable VM creation instead of manual clone drift.
Best Practices
Snapshot before guest-agent, disk, boot, passthrough, or hypervisor upgrades, but do not treat snapshots as backups.
Keep host, guest, and storage backups independently restorable.
Document PCI/GPU passthrough bindings so kernel updates do not strand the host.
Workflow
Step 1: Identify the task
Task
Start with
Reference
Proxmox VM creation
CLI (qm) or API (pvesh), cloud-init
references/proxmox.md
Terraform provisioning
bpg/proxmox provider, lifecycle rules
references/proxmox.md (Terraform section)
Image building
Packer + cloud-init templates
references/image-building.md
libvirt/KVM management
virsh, XML domain definitions
references/libvirt-qemu-kvm.md
GPU/PCI passthrough
IOMMU groups, vfio-pci
references/proxmox.md (PCI section)
Performance tuning
Disk, memory, CPU config
This file + references
Migration to Proxmox
From VMware, XCP-ng, or bare metal
references/proxmox.md
Step 2: Gather requirements
Before creating or modifying VMs:
Hypervisor and version - Proxmox VE 9.x? libvirt? VMware migration?
Guest OS - Linux distro, Windows, BSD? (affects virtio drivers, ballooning, agent)
CPU - core count, type (host vs emulated), pinning needs, NUMA topology
Memory - dedicated amount, ballooning (usually: don't), hugepages for databases
Storage - backend (LVM-thin, ZFS, Ceph, NFS), disk size, format (raw vs qcow2)
HA requirements - clustered? live migration? fencing?
Backup strategy - PBS, snapshots, vzdump, frequency
Step 3: Build
Follow the domain-specific reference file. Key principles:
Use cloud-init for provisioning. Don't manually configure VMs after creation. Inject SSH
keys, network config, packages, and user accounts via cloud-init.
Use virtio everywhere. Disk (virtio-scsi), network (virtio-net), display (virtio-gpu for
headless). IDE and e1000 exist for legacy OS compatibility only.
Pin CPU type to host. Emulated CPU types (kvm64, qemu64) hide features the guest needs
(AES-NI, AVX, SSE4). Use host unless you need live migration across heterogeneous hardware.
Test disk config changes with stop/start, not reboot. Guest reboot doesn't restart QEMU -
disk config changes (discard, cache, iothread) only take effect after qm stop + qm start.
fstrim -v / in guest, check thin pool data_percent on host
PCI passthrough
lspci in guest shows passed device, driver loaded
Network connectivity
ping gateway, check ip addr matches cloud-init config
Memory
free -h in guest matches expected (not balloon-reduced)
Live migration
Test with qm migrate <vmid> <target> --online on non-critical VM first
Quick Task: VM from Cloud Image (Proxmox)
The fastest path to a production-ready VM. Skip Packer and ISO installs for standard setups.
Download a cloud image to the Proxmox node (note: the URL below points to a daily/testing image; prefer a stable release image - daily images may have cloud-init metadata gaps causing first-boot surprises):
wget -P /var/lib/vz/template/iso/ https://cloud.debian.org/images/cloud/trixie/daily/latest/debian-13-generic-amd64.qcow2
Import and attach the disk with SSD optimizations:
qm importdisk 100 debian-13-generic-amd64.qcow2 local-lvmqm set 100 --scsi0 local-lvm:vm-100-disk-0,discard=on,iothread=1,ssd=1 --boot order=scsi0
Add cloud-init drive and configure:
qm set 100 --ide2 local-lvm:cloudinitqm set 100 --ciuser admin --sshkeys ~/.ssh/id_ed25519.pub --ipconfig0 ip=10.10.10.100/24,gw=10.10.10.1
Start: qm start 100
Verify: qm agent 100 ping (may take 1-2 min on first boot while cloud-init runs)
To make a reusable template, stop the VM after verification and run qm template 100.
Clone with qm clone 100 101 --name new-vm --full.
Proxmox VE Quick Reference
Read references/proxmox.md for full coverage of API, CLI, storage backends, clustering,
HA, migration, PCI passthrough, backup, and Terraform patterns.
Essential CLI
# VM management
qm list # List all VMs
qm create 100 --name test --memory 2048 --cores 2 --net0 virtio,bridge=vmbr0
qm start/stop/shutdown/reset 100 # Power operations
qm config 100 # Show VM config
qm set 100 --memory 4096 # Modify config (some need stop/start)
qm resize 100 scsi0 +10G # Extend disk (can't shrink)
qm agent 100 ping # Test QEMU agent
qm migrate 100 pve2 --online --with-local-disks # Live migrate# Container management
pct list # List LXC containers
pct create 200 local:vztmpl/debian-12-standard_12.7-1_amd64.tar.zst
# Storage
pvesm status # Storage pool overview
lvs -a -o+devices # LVM thin pool status (on LVM backend)# Cluster
pvecm status # Cluster status
pvecm nodes # Node list
ha-manager status # HA status
Critical gotchas (battle-tested)
These come from production Proxmox environments and will save hours of debugging:
Stop/start vs reboot: Guest reboot does NOT restart the QEMU process. Disk config
changes (discard, cache mode, iothread, bus type) only apply when QEMU starts fresh.
Always use qm stop then qm start for hardware config changes. This also applies to
memory balloon device changes.
LVM thin pool at 100%: When data_percent hits 100%, ALL VM I/O on that pool fails
instantly - guests hang, no graceful degradation. Recovery requires lvextend on the
thin pool or migrating VMs off. Monitor thin pool usage and alert well before 100% (80%
warning, 90% critical). data_percent measures blocks ever written, not current filesystem
usage - a VM that wrote then deleted 50GB still shows that 50GB in data_percent until
fstrim reclaims it.
Live migration via SSH:qm migrate runs in the foreground. If the SSH session drops,
the migration aborts. For large VMs (32GB+ disk), use:
Migration is abort-safe: source VM stays running on failure, target LVs are cleaned up.
KVM ballooning: The balloon device lets the host reclaim unused guest memory. Sounds
great, causes pain. Alpine Linux (and some BSDs) can't hotplug DIMMs - balloon changes
need full power-cycle (stop/start, not reboot). Even on Debian, balloon behavior is
unpredictable under memory pressure. Recommendation: disable ballooning (memory_min_mb = 0
in Terraform, or set balloon to 0 in qm) and provision VMs with the memory they actually need.
fail2ban on Proxmox (Debian 13):/var/log/daemon.log doesn't exist under journald.
Use backend = systemd with journalmatch = _COMM=pvedaemon in the jail config.
openipmi on non-IPMI hardware: Fails on boot, generates spurious alerts. Safe to
systemctl mask openipmi on nodes without BMC/IPMI hardware. Masking survives package
updates; disabling doesn't.
Storage Performance
Backend
Best for
Thin provision
Snapshot
Live migration
LVM-thin
Local SSDs, production
Yes
Yes (copy-on-write)
With --with-local-disks
ZFS
Data integrity, compression
Yes
Yes (native)
With replication
Ceph/RBD
Multi-node shared storage
Yes
Yes
Native (shared)
NFS
ISOs, templates, backups
Depends on NAS
Depends
Yes (shared)
local (dir)
Small/test
No (file-based)
qcow2 only
No
Disk interface hierarchy (fastest to slowest):
virtio-scsi-single + iothread - one controller per disk, best IOPS
virtio-scsi-pci + iothread - shared controller, good for most workloads
virtio-blk - legacy virtio, good performance but fewer features
IDE - legacy only, needed for some old OSes
SSD optimization checklist:
ssd = 1 on disk config (tells guest it's on SSD, enables TRIM in guest)
discard = on on QEMU disk (passes TRIM/UNMAP to storage backend)
fstrim.timer enabled in guest (weekly by default on systemd distros)
Verify with: fstrim -v / in guest, then check lvs -o data_percent on host
Disk resize (the Terraform trap): Can't resize disks via the bpg/proxmox Terraform
provider. The correct procedure:
qm resize <vmid> scsi0 +10G on the Proxmox host
growpart /dev/sda 1 in the guest (expand partition)
resize2fs /dev/sda1 in the guest (expand filesystem)
Update the disk_size_gb variable in Terraform to match
GPU / PCI Passthrough Quick Reference
Full details (IOMMU groups, ACS override, Terraform patterns) in references/proxmox.md.
The minimum viable path for a Windows 11 + NVIDIA desktop GPU on Proxmox VE 9.x:
Host prereqs. Enable VT-d / AMD-Vi in BIOS. Add intel_iommu=on (or amd_iommu=on)
plus iommu=pt to the kernel command line (/etc/kernel/cmdline on PVE with systemd-boot,
/etc/default/grub on legacy). Run proxmox-boot-tool refresh (or update-grub) and reboot.
Bind to vfio-pci.lspci -nn | grep -i nvidia to find vendor:device IDs, then:
echo "options vfio-pci ids=10de:XXXX,10de:YYYY" > /etc/modprobe.d/vfio-pci.conf (GPU +
its audio function). Blacklist nouveau and nvidia. update-initramfs -u and reboot.
Verify with lspci -nnk | grep -A3 NVIDIA - driver in use must be vfio-pci.
VM settings for Windows 11. Machine type q35, BIOS ovmf (add an EFI disk), TPM v2.0
state disk, cpu: host, hidden=1 to dodge NVIDIA's Code 43 on older drivers. Example:
qm set 100 --machine q35 --bios ovmf --cpu host,hidden=1 --efidisk0 local-lvm:1,format=raw
Attach the GPU. Prefer hardware mappings (PVE 8.1+) for migration safety:
pvesh create /cluster/mapping/pci --id gpu-rtx4070 --map 'node=pve1,path=0000:01:00.0'
then qm set 100 --hostpci0 mapping=gpu-rtx4070,pcie=1,x-vga=1. Legacy form:
--hostpci0 01:00,pcie=1,x-vga=1. Drop x-vga for compute-only passthrough.
Check IOMMU groups with find /sys/kernel/iommu_groups/ -type l | sort -V before
anything else - every device in the target group gets passed through together. Single-GPU
hosts need early vfio binding (initramfs) or the host driver claims it first.
Reset bug: NVIDIA consumer cards (including RTX 4070) usually reset cleanly, but verify
with two successive VM restarts before production. AMD RX 5000/6000 series often need the
vendor-reset kernel module or pcie_port_pm=off. If the second VM start hangs, you hit it.
Memory Management
Ballooning - the short version: Don't use it unless you've tested it on your exact
guest OS and workload. Disable with balloon: 0 in VM config.
NUMA: Enable for VMs with 4+ cores or 8GB+ RAM. Proxmox: numa: 1 in VM config.
QEMU auto-creates NUMA nodes matching the host topology.
Hugepages: 2MB or 1GB pages reduce TLB misses. Significant for databases and
memory-intensive workloads. Configure on the host:
# Reserve 1024 x 2MB hugepages (2GB total)echo 1024 > /proc/sys/vm/nr_hugepages
# Persistent: add to /etc/sysctl.d/
vm.nr_hugepages = 1024
Then enable in VM config. Note: hugepages memory can't be shared or ballooned.
CPU hotplug vs memory hotplug: CPU hotplug works live on most modern Linux guests.
Memory hotplug (adding DIMMs at runtime) is fragile - Alpine can't do it at all, and even
Debian requires specific kernel config. Size memory correctly at creation time.
libvirt/QEMU Quick Start
For libvirt/KVM without Proxmox, the fastest path to a running VM:
# Download a Debian cloud image and resize it
wget -O /var/lib/libvirt/images/myvm.qcow2 \
https://cloud.debian.org/images/cloud/bookworm/latest/debian-12-generic-amd64.qcow2
qemu-img resize /var/lib/libvirt/images/myvm.qcow2 20G
# Boot from the cloud image with cloud-init
virt-install --name myvm --ram 2048 --vcpus 2 --cpu host \
--disk path=/var/lib/libvirt/images/myvm.qcow2,bus=virtio \
--network network=default,model=virtio \
--cloud-init user-data=user-data.yaml,meta-data=meta-data.yaml \
--import --os-variant debian12 --noautoconsole
Build the cloud-init ISO with cloud-localds cidata.iso user-data.yaml meta-data.yaml and attach
it as a second disk, or use the --cloud-init flag shown above (virt-install 4.0+).
Reusable template pattern: keep the downloaded cloud image as a read-only golden image
(/var/lib/libvirt/images/debian-13-template.qcow2) and create each VM disk as a qcow2
overlay backed by it - qemu-img create -f qcow2 -b debian-13-template.qcow2 -F qcow2 myvm.qcow2. Overlays only store per-VM changes and boot in seconds. Regenerate the base
when you need a new OS minor. Validate first boot with cloud-init status --wait inside
the guest. Never set password: or chpasswd: with plaintext values in user-data - use
ssh_authorized_keys and rely on lock_passwd: true (the cloud-image default).
virsh list --all to confirm state; virsh console myvm to attach. For full XML domain
definitions, network and storage pool management, and virsh lifecycle commands, see
references/libvirt-qemu-kvm.md.
Hypervisor Selection
Hypervisor
Type
Best for
Avoid when
Proxmox VE
Type 1 (KVM+LXC)
Homelab, SMB, API-driven automation
Need VMware ecosystem tooling
libvirt/KVM
Type 1 (bare)
Custom setups, OpenStack, direct control
Want a GUI or clustering OOB
XCP-ng
Type 1 (Xen)
Xen-based infra, XenOrchestra UI
KVM-specific features (virtio-fs)
VMware ESXi
Type 1
Enterprise with existing VMware investment
Post-Broadcom: licensing costs exploded
VirtualBox
Type 2
Dev workstations, testing
Production. Ever.
VMware post-Broadcom (2026): Broadcom acquired VMware (closed Nov 2023). Perpetual
licenses eliminated, subscription-only model, free ESXi discontinued then partially
reinstated (ESXi 8.0 U3e "free hypervisor", April 2025). Many organizations are
migrating to Proxmox or XCP-ng. The migration path from VMware is well-documented
but non-trivial for large estates.
Reference Files
references/proxmox.md - Proxmox VE deep-dive: API, CLI, storage, clustering, HA,
live migration, PCI passthrough, Proxmox Backup Server, and Terraform (bpg/proxmox
provider patterns, lifecycle gotchas, cloud-init)
references/libvirt-qemu-kvm.md - libvirt/QEMU/KVM: virsh commands, XML domain
definitions, QEMU command-line, KVM modules, disk formats, networking
references/gotchas.md - Battle-tested pitfalls and failure modes from production
Proxmox/KVM environments. Read this before any non-trivial change.
Output Contract
See references/output-contract.md for the full contract.
Skill name: VIRTUALIZATION
Deliverable bucket:audits
Mode: conditional. When invoked to analyze, review, audit, or improve existing repo content, emit the full contract - boxed inline header, body summary inline plus per-finding detail in the deliverable file, boxed conclusion, conclusion table - and write the deliverable to docs/local/audits/virtualization/<YYYY-MM-DD>-<slug>.md. When invoked to answer a question, teach a concept, build a new artifact, or generate content, respond freely without the contract.
Severity scale:P0 | P1 | P2 | P3 | info (see shared contract; only used in audit/review mode).
Related Skills
terraform - owns HCL patterns, module design, state management. This skill owns
Proxmox-specific provider patterns (bpg/proxmox lifecycle rules, cloud-init interface,
disk resize workarounds). Use terraform for general IaC; this skill for Proxmox-specific
Terraform.
kubernetes - for container orchestration running on top of VMs. This skill provisions
the VM infrastructure; kubernetes manages what runs inside the cluster.
networking - for network config not specific to hypervisors (DNS, VPNs, reverse
proxies, nftables). This skill covers VM networking (bridges, VLANs, virtio-net).
ansible - for day-2 configuration of VMs after provisioning. This skill creates the
VM; ansible configures what runs on it.
docker - for container image optimization. This skill manages VMs that may host
Docker/container workloads.
Rules
These are non-negotiable. Violating any of these is a bug.
virtio for everything. Disk (virtio-scsi), network (virtio-net). IDE and e1000 are
for legacy OS compatibility only.
CPU type host in production. Emulated types hide features. Only use emulated types
for live migration across heterogeneous CPU generations.
Stop/start for hardware changes, not reboot. Guest reboot doesn't restart QEMU. Disk,
memory, and device config changes need qm stop + qm start.
No disk resize via Terraform. Use qm resize on host, growpart/resize2fs in guest,
then update the Terraform variable.
Disable ballooning by default. Enable only after testing on the specific guest OS.
Monitor thin pool data_percent. Alert at 80%, critical at 90%. At 100%, all I/O fails.
nohup for long migrations. SSH disconnect kills foreground qm migrate.
prevent_destroy + ignore_changes on Terraform VMs. Protect disk and node_name
from accidental destruction and migration drift.
Run the AI self-check. Every generated VM config gets verified against the checklist
above before returning.
Test before production. New VM configs, passthrough setups, storage backends - test
on a non-critical VM first.
