Diagnose the most expensive silent failure on a CoreWeave multi-node GPU job:
GPUDirect RDMA falling back from InfiniBand to TCP. When NCCL drops from NET/IB to
NET/Socket, collectives keep running with NO error but throughput collapses (commonly
5-20x slower) while every GPU still bills at full rate — 5x the GPU bill for the same
work, invisibly. Paste an NCCL_DEBUG=INFO log (and/or a pod-spec, ibstat, or
all_reduce_perf output) and the bundled deterministic script verdicts whether RDMA is
actually engaged, which of the three required conditions is missing, and the fix.
Use when multi-node training is slow, when checking whether RDMA/InfiniBand is engaged,
or when all-reduce bandwidth looks low. Trigger with "coreweave slow training", "is RDMA
working", "NCCL fell back to TCP", "NET/Socket", "GPUDirect RDMA", "infiniband not
used", "multi-node training slow".
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Une commande directe contourne le prompt de vérification. Examinez la source avant de l'exécuter.
Diagnose the most expensive silent failure on a CoreWeave multi-node GPU job:
GPUDirect RDMA falling back from InfiniBand to TCP. When NCCL drops from NET/IB to
NET/Socket, collectives keep running with NO error but throughput collapses (commonly
5-20x slower) while every GPU still bills at full rate — 5x the GPU bill for the same
work, invisibly. Paste an NCCL_DEBUG=INFO log (and/or a pod-spec, ibstat, or
all_reduce_perf output) and the bundled deterministic script verdicts whether RDMA is
actually engaged, which of the three required conditions is missing, and the fix.
Use when multi-node training is slow, when checking whether RDMA/InfiniBand is engaged,
or when all-reduce bandwidth looks low. Trigger with "coreweave slow training", "is RDMA
working", "NCCL fell back to TCP", "NET/Socket", "GPUDirect RDMA", "infiniband not
used", "multi-node training slow".
Designed for Claude Code, also compatible with Codex
tags
["saas","coreweave","gpu-cloud","rdma","nccl"]
CoreWeave Fabric Diagnostics
Community-contributed. Not affiliated with, endorsed by, or sponsored by
CoreWeave, Inc. CoreWeave is a registered trademark of CoreWeave, Inc.
Detects when a CoreWeave multi-node GPU job has silently fallen off the InfiniBand fabric
onto TCP — the failure that makes distributed training run at a fraction of the hardware's
speed while every GPU keeps billing at the full rate — and gives the exact fix.
Overview
On a CoreWeave multi-node job, NCCL should carry collectives over InfiniBand with
GPUDirect RDMA (NET/IB). If any one of three conditions is missing, NCCL silently
falls back to TCP sockets (NET/Socket): the job still runs, still converges, and
raises no error — but all-reduce throughput collapses (commonly cited as 5-20x
slower [nccl]) because it now crosses the Ethernet control plane instead of the
400 Gb/s-class fabric. You keep paying full GPU rate for a multi-node run that performs
like a badly-connected one. This is the single highest-dollar invisible failure on the
platform, and nothing in the default output flags it.
The diagnosis is deterministic: the bundled scripts/fabric-check.py greps the pasted
NCCL_DEBUG=INFO log for the decisive Using network line (and NET/IB vs NET/Socket),
parses the pod-spec's resources block for the RDMA device request, reads ibstat port
state, and echoes any all_reduce_perf bus bandwidth — then emits a VERDICT with the
rdma_engaged/transport call, the missing conditions, and the fix. The LLM never
eyeballs which transport is in use; the script decides. Deep grounding lives in
references/, loaded only when a leg of the diagnosis needs it.
Prerequisites
An NCCL_DEBUG=INFO log from the actual run — the primary signal. Re-run the job
(or one rank) with NCCL_DEBUG=INFO set and capture stderr. The decisive line is
Using network IB (good) vs Using network Socket (the fallback). This is the one input
the skill really needs; everything else corroborates.
Optional, for a full diagnosis: the pod/job spec (kubectl get pod NAME -o yaml) to
check the RDMA device request; output from the node for port health; and
results from CoreWeave's to measure bus bandwidth.
python3 to run the deterministic checker (stdlib only).
kubectl (read-only) if corroborating the live pod spec / node cordon state.
Authentication. Nothing secret is read. If the pod spec is pulled live, kubectl uses
the existing $KUBECONFIG; the skill only ever runs kubectl get (read-only) — it never
cordons, drains, or applies.
The three required conditions (all must hold, or NCCL falls back)
The RDMA device is requested in BOTH resources.requests AND resources.limits
(rdma/ib: 1). If it is in only one — or absent — the device plugin does not inject the
IB device into the pod and NCCL never sees a HCA. [unverified — the exact resource key
(e.g. rdma/ib) depends on the installed RDMA device-plugin config; confirm with
kubectl describe node / kubectl get node -o yaml.]
NCCL_IB_HCA=ibp and NCCL_SOCKET_IFNAME=eth0 are set (CoreWeave's documented
values [cw]) — unless you launch via the MPI Operator, which manages this network
config for you [nt].
NCCL_DEBUG=INFO then confirms NET/IB (ideally a GPU Direct RDMA Enabled line).
If it shows NET/Socket / Using network Socket, RDMA is not engaged.
The pipeline is gather → verdict → fix → confirm. The script does the transport call;
references/ carry the grounding:
Gather the NCCL_DEBUG=INFO log (required) plus any pod-spec / ibstat / all_reduce_perf
output you have. Concatenate them into one paste — the checker keys on each signal
independently.
Run the deterministic checker to get the VERDICT.
If the verdict is fallback (Socket), apply the three-condition fix and re-run.
If the verdict is IB but degraded, chase the degraded signal (port down / low busbw).
On NVSwitch systems with a stuck fabric, use the Fabric Manager reset order.
Step 1: Gather the evidence
The log is the load-bearing input. If the user has not run with NCCL_DEBUG=INFO, tell
them to — without it, transport selection is unknowable. To pull the live pod spec:
kubectl get pod "$POD" -o yaml > pod.yaml
Step 2: Run the deterministic checker (it makes the call, not the model)
Pipe everything you gathered to fabric-check.py. It greps for the decisive Using network line, the resources block, ibstat state, and any Avg bus bandwidth:
The verdict names rdma_engaged (yes/no/partial/unknown), the transport in use, the
missing conditions, and the fix. Use --json to capture the structured result for further
processing. Reading the log by eye is what this step exists to prevent — see
references/nccl-debug-reading.md for what each line
means.
Use Glob to gather multiple pasted log files when a run spans several ranks, Write the
verdict report to the working directory, and Edit it to refine the fix as the user
iterates on the manifest.
Step 3: If the verdict is fallback (NET/Socket) — apply the three-condition fix
This is the money case. Fix in order (the checker prints the same list):
Add rdma/ib: 1 to bothresources.requests and resources.limits.
Set NCCL_IB_HCA=ibp and NCCL_SOCKET_IFNAME=eth0 (or launch via the MPI Operator).
Re-run with NCCL_DEBUG=INFO and confirm the log now shows NET/IB +
GPU Direct RDMA Enabled, not NET/Socket.
If the log shows NCCL_IB_DISABLE=1, that alone forces sockets — set it to 0 (RoCE and
IB both need the IB verbs transport enabled [env]).
Step 4: If the verdict is IB-but-degraded — chase the degraded signal
RDMA can be engaged yet slow. Two corroborating checks:
ibstat — every port must read State: Active / Physical state: LinkUp. A port
Down/Polling, or a link that flaps, drags the whole collective; CoreWeave
auto-cordons flapping links, so a shrinking node count mid-run is a fabric symptom.
all_reduce_perf bus bandwidth — compare the reported busbw against CoreWeave's
published nccl-tests manifest baseline for your GPU count + NCCL version [nt]. Do
not compare against a fixed number: the baseline moves with GPU type, node count, NCCL
version, and SHARP. The checker echoes the observed figure tagged [unverified vs baseline] precisely so nobody reads it as a hard pass/fail.
Step 5: NVSwitch systems — Fabric Manager reset order
On NVSwitch/NVLink systems, a wedged fabric shows up as NVLink/NVSwitch errors rather than
IB fallback. The safe reset order is stop Fabric Manager → reset the GPUs → start Fabric
Manager, never the reverse:
[unverified — service unit name and reset support vary by image/driver; on managed CoreWeave nodes prefer opening a support ticket / cordoning over an in-place reset.]
Output
A VERDICT line stating whether RDMA is engaged, the transport actually in use, and —
for the fallback case — the plain-language cost framing (running on TCP, paying full GPU
rate for a fraction of the throughput).
The missing-conditions list — which of the three required conditions is absent, each
one sufficient on its own to force the fallback.
The ordered fix — the rdma/ib-in-requests-AND-limits change, the env vars, and the
re-verify step.
Degraded-fabric signals when RDMA is engaged but slow — down/flapping IB ports and the
observed busbw (tagged [unverified vs baseline]).
Error Handling
Error
Cause
Solution
Verdict is unknown
No NET/IB / NET/Socket / Using network line in the paste
Re-run the job with NCCL_DEBUG=INFO and capture stderr; without it transport is unknowable.
Verdict Socket but the pod "has RDMA"
rdma/ib in limits only (or only requests)
Add it to BOTH blocks; the device plugin injects the IB device only when the resource is requested.
NET/IB present yet training still slow
GDR not actually enabled; nvidia-peermem unloaded → traffic stages through host memory
Confirm a GPU Direct RDMA Enabled line; verify nvidia-peermem is loaded on the node [nccl].
busbw "looks low"
Compared against a wrong/guessed baseline
Compare only against CoreWeave's nccl-tests manifest baseline for your GPU count + NCCL version; the number is workload/version-dependent.
Nodes drop out mid-run
Flapping IB link → CoreWeave auto-cordon
Check ibstat for Physical state != LinkUp; the cordoned node's link is the cause, not your job.
rdma/ib resource not schedulable
Wrong resource key for the installed device plugin
Confirm the exact key with kubectl describe node (search the Allocatable list) and substitute it.
Examples
Example 1: "Our 4-node H100 training run got slow — is RDMA even working?"
The user pastes an NCCL_DEBUG=INFO excerpt plus the pod spec. The checker finds Using network Socket and rdma/ib only in requests, and verdicts:
### VERDICT: RDMA is NOT engaged -- NCCL fell back to TCP (NET/Socket). Multi-node collectives are running over the Ethernet control plane, commonly 5-20x slower for the same GPU-hours -- you pay full GPU rate for a fraction of the throughput, and NCCL raised no error.
- RDMA engaged: **no**
- Transport in use: **Socket**
- Missing conditions (each one alone forces a silent TCP fallback):
- `rdma/ib` missing from resources.limits
- `NCCL_IB_HCA` not set (e.g. `ibp`) -- unless the MPI Operator manages it
**The fix (in order):**
1. Request the RDMA device in BOTH requests AND limits: `rdma/ib: 1` (if it is in only one, the device plugin will not inject the IB device).
2. Set `NCCL_IB_HCA=ibp` and `NCCL_SOCKET_IFNAME=eth0` (CoreWeave values), or let the MPI Operator manage them.
3. Re-run with `NCCL_DEBUG=INFO` and confirm the log now shows `NET/IB` and `GPU Direct RDMA Enabled` -- not `NET/Socket` / `Using network Socket`.
4. Confirm each IB port is `State: Active` / `Physical state: LinkUp` via `ibstat`; a flapping link gets auto-cordoned by CoreWeave.
Example 2: "RDMA is on but all-reduce bandwidth seems low"
The log shows NET/IB and GPU Direct RDMA Enabled, so the checker returns
rdma_engaged: yes. It then surfaces the ibstat port that reads Physical state: Polling as a degraded signal and echoes the observed busbw tagged [unverified vs baseline], directing the user to compare against CoreWeave's nccl-tests manifest for their
GPU count + NCCL version rather than a guessed number.
Sibling: coreweave-gpu-cost-leak-hunter dollarizes idle/right-sizing spend; this skill finds the throughput leak (fabric fallback) that a cost report cannot see.
