lp-remove

Étoiles2

Forks0

Mis à jour16 juin 2026 à 13:45

Remove liquidity from an existing ETH/DIEM v3 LP position and collect proceeds. Use when closing a position to consolidate DIEM.

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Source

Liquid-Protocol-Ops

Liquid-Protocol-Ops/deploy-autonomous-template

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Métiers associésSOC

Basé sur la classification professionnelle SOC

Développeurs de logicielsProfessions informatiques et mathématiques·SOC 15-1252

SKILL.md

readonly

name	lp-remove
description	Remove liquidity from an existing ETH/DIEM v3 LP position and collect proceeds. Use when closing a position to consolidate DIEM.

LP Remove — Collect Fees + Decrease Liquidity

Two-step process to exit a Uniswap v3 position:

collect — harvest accrued fees (WETH + DIEM) to agent wallet
decreaseLiquidity — burn liquidity and unlock token principal

Both calls go to the NFPM at 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1.

Addresses (Base mainnet)

Contract	Address
NFPM	`0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1`
DIEM ERC-20	`0xF4d97F2da56e8c3098f3a8D538DB630A2606a024`
WETH	`0x4200000000000000000000000000000000000006`
ETH/DIEM v3 pool	`0x80d995189ecc593672aD4703b250a5e82672EB1D`

Read position state first

cast call 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1 \
  "positions(uint256)(uint96,address,address,address,uint24,int24,int24,uint128,uint256,uint256,uint128,uint128)" \
  <TOKEN_ID> \
  --rpc-url https://mainnet.base.org
# Returns: nonce, operator, token0, token1, fee, tickLower, tickUpper,
#          liquidity, feeGrowthInside0LastX128, feeGrowthInside1LastX128,
#          tokensOwed0, tokensOwed1

Step 1: Collect accrued fees

// NFPM.collect(CollectParams)
struct CollectParams {
  uint256 tokenId;
  address recipient;
  uint128 amount0Max;  // use type(uint128).max to collect all
  uint128 amount1Max;  // use type(uint128).max to collect all
}

# Encode: collect all fees from position
cast send 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1 \
  "collect((uint256,address,uint128,uint128))(uint256,uint256)" \
  "(<TOKEN_ID>,<AGENT_ADDRESS>,340282366920938463463374607431768211455,340282366920938463463374607431768211455)" \
  --private-key $AGENT_PRIVATE_KEY \
  --rpc-url https://mainnet.base.org

Step 2: Decrease liquidity (full exit)

struct DecreaseLiquidityParams {
  uint256 tokenId;
  uint128 liquidity;   // from positions() call above
  uint256 amount0Min;  // slippage floor
  uint256 amount1Min;  // slippage floor
  uint256 deadline;
}

# Full liquidity removal — set liquidity to value from positions() call
cast send 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1 \
  "decreaseLiquidity((uint256,uint128,uint256,uint256,uint256))(uint256,uint256)" \
  "(<TOKEN_ID>,<LIQUIDITY>,0,0,<DEADLINE>)" \
  --private-key $AGENT_PRIVATE_KEY \
  --rpc-url https://mainnet.base.org

# Then collect again to pull the unlocked principal
cast send 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1 \
  "collect((uint256,address,uint128,uint128))(uint256,uint256)" \
  "(<TOKEN_ID>,<AGENT_ADDRESS>,340282366920938463463374607431768211455,340282366920938463463374607431768211455)" \
  --private-key $AGENT_PRIVATE_KEY \
  --rpc-url https://mainnet.base.org

Code path (not yet implemented)

Add collectFromLP and removeFromLP to harness/providers/liquidity.ts using the same TxSender + publicClient pattern as reinvestToLP. Read tokenId from memory/lp-positions.jsonl.

Notes

Always collect fees before decreaseLiquidity — fees are tracked separately.
After full exit, the NFT can be burned via NFPM.burn(tokenId) to reclaim gas.
If the position is out of range (tickUpper < currentTick for DIEM-only), principal is 100% DIEM.
amount1Min = 0 is acceptable for a DIEM-only out-of-range position (no price risk).

Plus depuis ce dépôt

même dépôt

capital-allocation

Liquid-Protocol-Ops/deploy-autonomous-template

Decide how to allocate DIEM between Venice compute staking, WETH swap for x402 API access, Uniswap LP, and Aerodrome LP. Run once per tick before any capital movement.

2026-06-162

check-portfolio

Liquid-Protocol-Ops/deploy-autonomous-template

Read all agent on-chain positions via the check-portfolio.ts script. Use this instead of raw curl/cast calls to avoid hex encoding mistakes.

2026-06-162

claim-diem

Liquid-Protocol-Ops/deploy-autonomous-template

Claim DIEM from FeeLocker, run accumulate-vs-build analysis, and route earnings to LP or Venice staking. Scheduled every 12 hours via aeon. DRY-RUN BY DEFAULT — pass --live to execute.

2026-06-162

compute-presale

Liquid-Protocol-Ops/deploy-autonomous-template

Launch a Liquid Protocol token with a LiquidPresaleVault presale. STAKE MODE ONLY (policy 2026-06-12) — depositors lock DIEM and always get it back; allocation is lock-to-earn. One vault per launch, 10% of supply, 60d default lock.

2026-06-162

deploy-autonomous

Liquid-Protocol-Ops/deploy-autonomous-template

Working in the deploy-autonomous GitHub template repo — agent harness, identity layer, Venice provider, safety modules, and the create-identity CLI.

2026-06-162

heartbeat

Liquid-Protocol-Ops/deploy-autonomous-template

Proactive health check — skill failures, LP state, memory flags, FeeLocker balance. Run 3× daily to surface issues before they compound.

2026-06-162

LP Remove — Collect Fees + Decrease Liquidity

Two-step process to exit a Uniswap v3 position:

collect — harvest accrued fees (WETH + DIEM) to agent wallet

decreaseLiquidity — burn liquidity and unlock token principal

Both calls go to the NFPM at 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1.

Addresses (Base mainnet)

Contract

Address

NFPM

0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1

DIEM ERC-20

0xF4d97F2da56e8c3098f3a8D538DB630A2606a024

WETH

0x4200000000000000000000000000000000000006

ETH/DIEM v3 pool

0x80d995189ecc593672aD4703b250a5e82672EB1D

Read position state first

cast call 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1 \ "positions(uint256)(uint96,address,address,address,uint24,int24,int24,uint128,uint256,uint256,uint128,uint128)" \ <TOKEN_ID> \ --rpc-url https://mainnet.base.org # Returns: nonce, operator, token0, token1, fee, tickLower, tickUpper, # liquidity, feeGrowthInside0LastX128, feeGrowthInside1LastX128, # tokensOwed0, tokensOwed1

Step 1: Collect accrued fees

// NFPM.collect(CollectParams) struct CollectParams { uint256 tokenId; address recipient; uint128 amount0Max; // use type(uint128).max to collect all uint128 amount1Max; // use type(uint128).max to collect all }

# Encode: collect all fees from position cast send 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1 \ "collect((uint256,address,uint128,uint128))(uint256,uint256)" \ "(<TOKEN_ID>,<AGENT_ADDRESS>,340282366920938463463374607431768211455,340282366920938463463374607431768211455)" \ --private-key $AGENT_PRIVATE_KEY \ --rpc-url https://mainnet.base.org

Step 2: Decrease liquidity (full exit)

struct DecreaseLiquidityParams { uint256 tokenId; uint128 liquidity; // from positions() call above uint256 amount0Min; // slippage floor uint256 amount1Min; // slippage floor uint256 deadline; }

# Full liquidity removal — set liquidity to value from positions() call cast send 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1 \ "decreaseLiquidity((uint256,uint128,uint256,uint256,uint256))(uint256,uint256)" \ "(<TOKEN_ID>,<LIQUIDITY>,0,0,<DEADLINE>)" \ --private-key $AGENT_PRIVATE_KEY \ --rpc-url https://mainnet.base.org # Then collect again to pull the unlocked principal cast send 0x03a520b32C04BF3bEEf7BEb72E919cf822Ed34f1 \ "collect((uint256,address,uint128,uint128))(uint256,uint256)" \ "(<TOKEN_ID>,<AGENT_ADDRESS>,340282366920938463463374607431768211455,340282366920938463463374607431768211455)" \ --private-key $AGENT_PRIVATE_KEY \ --rpc-url https://mainnet.base.org

Code path (not yet implemented)

Add collectFromLP and removeFromLP to harness/providers/liquidity.ts using the same TxSender + publicClient pattern as reinvestToLP. Read tokenId from memory/lp-positions.jsonl.

Notes

Always collect fees before decreaseLiquidity — fees are tracked separately.

After full exit, the NFT can be burned via NFPM.burn(tokenId) to reclaim gas.

If the position is out of range (tickUpper < currentTick for DIEM-only), principal is 100% DIEM.

amount1Min = 0 is acceptable for a DIEM-only out-of-range position (no price risk).