sage-tester

name	sage-tester
description	Run the Tester agent inline to validate a story's tests (or full regression with --full)
when_to_use	When you want to run tests for a story currently at TESTING and update its status, without running the full team workflow

Sage Tester Skill (inline)

This skill runs the Tester role solo: run tests for a single story (or full regression with --full), apply the two-gate logic to decide DONE vs IN_DEV, flip story statuses, and report to the user as plain text.

Path note: All python .sage/_tools/... commands below assume an installed project (a .sage/ directory exists at the project root). If you're running this skill from the sage-feature-team source repo itself (no .sage/ exists), substitute _tools/... instead.

---

Step 1: Parse Input

Usage:

/sage-tester                                # Auto-pick: next story at TESTING; story-scoped
/sage-tester STORY-3                        # Target a specific story; story-scoped
/sage-tester --full                         # Full regression (no story scope; status flips for ALL stories at TESTING)
/sage-tester STORY-3 --full                 # Run full regression but report focused on STORY-3
/sage-tester --feature add_dark_mode STORY-3

Compute:

• explicit_story -- first positional arg matching STORY-\d+, else null
• scope -- "full regression" if --full is given, else "story" (only target_story's tagged tests)
• feature_name -- --feature <name> if given, else auto-detect (Step 3)

---

---

Step 2: Load Rendered Tester Prompt (for project instructions and role contract)

python .sage/_tools/load_agents.py full

From the JSON, extract agents.Tester. The rendered prompt has two kinds of content -- use them differently:

Use these sections (mode-agnostic role contract -- they apply to you):

• .sage/agents/_BASE.md § Project-Specific Instructions -- the project's test command, log location, parsing patterns, setup/cleanup
• .sage/agents/tester.md § Your Job
• .sage/agents/tester.md § Key Rules -- monitoring, story-status gating, boundaries

Ignore these sections (team-mode workflow that does not apply when invoked as a skill):

• _BASE.md § STOP / SILENCE RULE / Starting Message / Workflow / Completion Outcomes / Progress File Updates / Key Rules (All Agents)
• tester.md § Tester Workflow (After Receiving Task) -- this skill defines its own workflow below (the two-gate logic is inlined in Step 6)
• tester.md § Async Polling Pattern (Universal) -- inline Monitor or wait synchronously instead of ScheduleWakeup
• tester.md § Completion Message Format -- this skill reports to the user as plain text instead

If success is false, surface the loader's error and stop.

---

Step 3: Detect Current Feature

If feature_name was passed via --feature, use it directly. Otherwise:

1. List directories matching <output_dir>/*/stories/ (output_dir from sage-config.yaml; default _output)
2. Zero matches -> tell the user: "No /stories/ directory found." Stop.
3. Exactly one match -> use it; extract feature_name from the directory name
4. Multiple matches -> show the list to the user and ask which feature to work on. Wait for their answer before continuing.

Compute:

• stories_dir = <output_dir>/<feature_name>/stories/

---

Step 4: Determine Target Story

Read every YAML file in stories_dir.

If explicit_story was given:

• Find <stories_dir>/<STORY-N>.yaml. Error if missing.
• Validate it's at status: TESTING. If not:
  • If IN_DEV or earlier: tell the user the story isn't ready for testing -- suggest /sage-developer <story> first; offer to abort or proceed anyway.
  • If DONE: ask whether to re-test it (regression check), switch story, or abort.

If no story was given (auto-pick): call the eligibility script:

python .sage/_tools/list_eligible.py --feature <feature_name>

Take the first story from the Tester list (already sorted lowest STORY-N first). If empty and --full was not given, show the user the bucketing and stop. Suggest /sage-developer to advance an IN_DEV story to TESTING.

Set target_story to the chosen story ID (may be null if --full was given without a story).

---

Step 5: Resolve Story-ID Tagging Convention

You need the project's story-ID tagging convention to map test results back to stories. Read it from .sage/sage-test-creator-config.yaml. If it's not documented, stop and ask the user -- without it you cannot reliably flip story statuses.

If scope == "story": also use the convention to construct the test selector for target_story (e.g., a pytest mark expression -m "STORY-3", or a Jest test name pattern, etc.). The selector mechanism may also be documented in .sage/sage-tester-config.yaml. If you can't construct a story-scoped selector, fall back to running full regression and tell the user why.

---

Step 6: Do the Work

1. Consult project instructions for setup, run command, log location, parsing patterns, cleanup.

2. Execute pre-test setup if specified.

3. Run tests:

   • scope == "story": run only tests tagged for target_story using the project's selector idiom (the selector you built in Step 5)
   • scope == "full regression": run the full suite per project instructions

4. Wait for completion -- for short runs, just wait. For long-running suites, use the Monitor tool to stream output and check periodically. If a test hangs (no output for 30s+), kill the process and report it as a hang -- don't leave the user waiting.

5. Execute post-test cleanup if specified.

6. Parse results per the project's parsing patterns. Map each test -> story via the tagging convention from Step 5.

7. For each story you actually exercised that was at TESTING, run TWO gates before deciding DONE vs IN_DEV (NEVER edit YAMLs directly):

   Gate A: All tagged tests passed? (Necessary)

   "Tests passed" requires BOTH a successful build AND all tagged tests returning green. Build/compile/dex failures are Gate A failures, not blockers. Any of the following -> flip back to IN_DEV:

   • Test assertion fail, runtime error, exception during a test
   • Compile error in test or production code
   • Dex/bundling error (R8/D8 rejection, etc.)
   • Test hang (kill the process, treat as failure)
   • Missing fixture/test data the Developer should provide

   python .sage/_tools/update_story_status.py STORY-N IN_DEV --stories-dir <stories_dir> \
       --reason "<one-line summary; prefix build_failure: when compile/dex>"
   

   Capture the last 30-50 lines of build/test output for the user-facing report.

   • All passed -> proceed to Gate B.

   Gate B: AC implementation map sidecar verified? (Also necessary -- green tests alone do NOT satisfy AC)

   python .sage/_tools/verify_ac_map.py STORY-N --stories-dir <stories_dir>
   

   • Returns success: true -> flip to DONE:

     python .sage/_tools/update_story_status.py STORY-N DONE --stories-dir <stories_dir>
     

   • Returns success: false -> flip back to IN_DEV:

     python .sage/_tools/update_story_status.py STORY-N IN_DEV --stories-dir <stories_dir>
     

     Capture the verifier's JSON output verbatim for the user report -- it tells the Developer exactly what's missing (missing AC, banned-word hits, AC with no impl path).

   • In scope == "story" mode, only run gates for target_story (other TESTING stories weren't run).

   • Check each update_story_status.py return; on success: false, surface and continue.

8. Apply the role's Key Rules throughout -- see .sage/agents/tester.md § Key Rules. Highlights: don't modify test or source code (that's /sage-developer's job), never hand-edit story YAMLs, leave stories outside scope untouched.

When done, report to the user as plain text:

Scope: <story | full regression>
Story: <target_story or "n/a">
Results: <passed>/<total> passed in <elapsed>s

Story status changes:
  - STORY-X: TESTING -> DONE         (Gate A: tests [OK]  Gate B: AC map [OK])
  - STORY-Y: TESTING -> IN_DEV       (Gate A failed -- failures: <test_names>)
  - STORY-Z: TESTING -> IN_DEV       (Gate A passed but Gate B failed -- see verifier output below)

Test failures:
  - <test_name>: <one-line summary of why it failed>
  ...

AC map failures (per story sent back for AC-map gap):
  - STORY-Z: <verifier JSON verbatim -- missing_ac, banned_word_hits, no_path_ac>

---

What This Skill Does NOT Do

• Does not write or fix code (use /sage-developer after a failure)
• Does not loop through fix->test cycles (use /sage-dev-test for that, or rerun this skill manually)
• Does not create a progress file

---

Token Tracking (Record)

After reporting to the user, record this skill's estimated token consumption:

python .sage/_tools/record_worker_usage.py     --feature <feature_name> --role Tester --story <target_story> --cycle 1     --inline --output-chars <approximate output chars produced>

Inline-mode entries are flagged estimated: true in _output/<feature_name>/tokens.json because we can't measure exact tokens from inside the main conversation (use /usage for the precise session total). Estimate output-chars as roughly the size of files you wrote + your final user-facing report. Failure here is non-fatal -- log and continue.