tether

name	tether
description	Beta — Stay in the loop over email during a long-running coding session. The agent sends threaded status updates to your inbox as it sees fit and picks up your emailed replies (questions/instructions) within a few minutes, so you can steer a working agent while AFK. Transport is e2a. Use when you want to walk away from a session but keep commanding it from your inbox.

tether — steer a long-running session from your inbox

Beta. The transport (e2a) and the flow are real; polish (adaptive backoff, richer digests) is still open.

/tether keeps you connected to a working session over email. The agent emails you updates when it judges there's something worth reporting (not on a timer, not every turn), and checks your inbox on an interval so your replies — questions or new instructions — are picked up within a few minutes. Reply stop to end.

Transport primer. tether rides on e2a. The e2a operate-well manual — the e2a skill (${CLAUDE_PLUGIN_ROOT}/skills/e2a/SKILL.md) — carries the mental model this skill assumes: how threading really works (reply headers + stable subject, not conversation_id), when a shared agents.e2a.dev address is all you need vs. a custom domain, and the pending_review/HITL gotcha. Read it if you're new to e2a; tether does not re-explain those.

Architecture (why this shape)

Coding agents are turn-based; nothing native listens to an inbox mid-session. So the two directions use different mechanisms:

• Send = agent-driven. The agent calls tether.sh update "…" at meaningful moments (finished a slice, hit a blocker, needs a decision). Cadence is the model's judgment → no per-turn spam, nothing to throttle.
• Receive = real-time wait. The agent runs tether.sh listen — it blocks on the e2a CLI's WebSocket (e2a listen --once; no LLM tokens while waiting) for the duration set at start --for, so replies are picked up within seconds; if the WebSocket is unavailable it degrades automatically to interval polling. It wakes the agent only when a reply actually arrives (or the window ends). See Durability tiers for keeping it alive across idle/sleep.
• Questions = ask by email. When the agent needs a decision or clarification from you, it must not use a terminal prompt / AskUserQuestion — you're AFK and can't see it, which would stall the whole session. It calls tether.sh ask "<question>", which emails the question into the thread and blocks until you reply, then prints your answer. This is the hard rule: while tethered, every question goes over email, never the terminal.
• Blocked-alert = hook (optional). A Notification hook emails you when the agent is stuck on a permission prompt it can't proceed past. Note: an emailed reply cannot answer a CLI permission prompt (there's no native way to inject approval), so for unattended runs pre-authorize the tools the session needs (a permission allowlist / a less-prompting mode). The hook is the safety net, not the approval channel.

Setup (once)

Prerequisites: Node (the transport is the e2a CLI ≥ the version pinned in lib.sh — resolved from $E2A_CLI, then PATH, then fetched automatically via npx -y @e2a/cli@^MIN, so there is nothing to install by hand) and Python 3 (local state handling only).

Fast path (recommended): tether.sh setup

If the e2a CLI is logged in (e2a login in a browser, or e2a login --with-key on a headless box), one command does the whole bootstrap:

"${CLAUDE_PLUGIN_ROOT}/skills/tether/tether.sh" setup

It verifies the credential (e2a whoami), ensures a tether inbox (reusing an existing tether-… agent or creating one on the shared domain — it will not silently adopt a non-tether inbox), turns outbound review off on that inbox, mints a least-privilege agent-scoped key (e2a_agt_…), and writes ~/.e2a-tether.env (previous file kept as .bak). Every step fails hard — it never stores the broad account key and never reports "ready" with a half-working config. Flags: --email you@yourdomain to use/create a specific inbox, --new to force a fresh one.

Manual setup (fallback)

1. Get an agent-scoped API key (e2a_agt_… — least privilege, so a leaked key can't touch the rest of the account): from the CLI with e2a keys create --agent <inbox>, or from https://e2a.dev/api-keys. No domain? Create the agent on the shared agents.e2a.dev domain (e2a agents create [e-mail] — live immediately, no DNS).
2. Save the credentials:

   cp "${CLAUDE_PLUGIN_ROOT}/skills/tether/tether.env.example" ~/.e2a-tether.env
   chmod 600 ~/.e2a-tether.env   # fill E2A_API_KEY (e2a_agt_…) + E2A_AGENT_EMAIL
   

3. (Optional) blocked-alert hook:

   "${CLAUDE_PLUGIN_ROOT}/skills/tether/install.sh" --to <repo-root>
   

Credentials resolve in order: explicit env vars → ~/.e2a-tether.env → ~/.e2a/config.json (written by e2a login; after e2a login --agent <inbox> that file already holds a least-privilege agent key, so tether needs no tether-specific config at all).

The tether agent must have send-side protection / HITL off, or each update is held for review instead of reaching you. tether.sh now detects this on every send: a held intro makes start refuse to arm, and a held update/ask prints a HELD for review (pending_review) warning and exits non-zero — so a held session fails loudly instead of "reporting" into a queue the user never sees.

First run (new user) — set them up, then tether

Before tethering, confirm the harness can actually send. Run "$T" status (where T is defined below). If it reports config: MISSING, this is a first-time user — help them get to a working setup instead of just failing:

1. Is e2a connected at all? If they've never used e2a, hand them e2a login — or, when e2a isn't installed globally, the npx form: npx -y @e2a/cli login (same auto-fetch the harness itself uses). It opens the browser sign-up/sign-in and saves an account-scoped key to ~/.e2a/config.json. (Headless box: they mint a key in the dashboard and run … login --with-key.) Interactive sign-in is theirs to complete: hand them the command, don't drive it.
2. Run the bootstrap: "$T" setup — it creates the inbox, disables outbound review, mints the agent-scoped key, and writes ~/.e2a-tether.env. See Setup above for what it refuses to do.
3. Re-check. "$T" status should now print config: OK (agent …). Proceed to the runtime flow.

If status already prints config: OK, skip this — they're a returning user. Don't put a configured user through onboarding.

Runtime flow (what the agent does when /tether is invoked)

Let T="${CLAUDE_PLUGIN_ROOT}/skills/tether/tether.sh".

0. Preflight. Run "$T" status. If config: MISSING, do First run (new user) above before continuing — don't call start and let it error out.
1. Ask the user's email address and how long to stay tethered (e.g. 30m, 2h, 8h/overnight, or until they say stop). They're present at this step, so a normal question is fine.
2. Start: "$T" start <email> --title "<work>" --for <duration> (or --until <ISO>; omit both for until-stop) — sends the intro, opens the thread, arms, records the window. --title is required (start refuses without it): a short description of the work being done (e.g. "migrate loft → @e2a/ui", "fix webhook retries") — it becomes the thread's subject line (Tether: <repo> — <title>), which is how the user tells this session apart from others in their inbox. The subject is fixed at start (threading needs it stable), so title the work, not the first step. --for takes a single unit (30m, 2h, 8h, 1d); a compound like 1h30m is rejected rather than silently treated as no-limit. If the intro comes back held for review (pending_review), start refuses to arm and tells you to turn protection off — a held intro means the user never got it.
3. Work, and send updates as you see fit — prefer HTML, it renders far better in mail clients: write the HTML to a file and run "$T" update --html <file> — a plain-text fallback is auto-derived (or pass --text "<fallback>"). Plain "$T" update "<text>" is for quick one-liner acks only. To send a file (a rendered PDF, a screenshot, a small log), add --attach <file> — repeatable, on either form, capped at 15 MB total per send (exit 3 = file not found, exit 4 = over the cap; past the cap, upload the file somewhere and send a link instead). Good moments: finished a slice, made a decision that's worth surfacing, hit a blocker, or before a long unattended stretch. Skip trivial turns. If update prints a HELD for review (pending_review) warning (exit 2), the update did not reach the user — stop and fix protection before continuing; don't keep "reporting" into a review queue.
4. Need a decision from the user? Ask by email — never the terminal. Run "$T" ask "<question>" (in the background); it emails the question and blocks until the user replies, then prints the answer. --attach <file> works here too — attach the artifact the decision hinges on (a diff, a mockup) rather than describing it. Do not use AskUserQuestion or a bare terminal prompt while tethered — an AFK user can't answer it and the session stalls. ask coordinates with listen automatically (it holds a lock so a background listen pauses and can't swallow your answer). Handle its exit codes: exit 3 = timed out with no reply (default 30m) — re-ask, send a nudge update, or keep working and listening, but never fall back to a terminal prompt; exit 4 = the question was held for review and never reached the user (fix protection).
5. Listen for the whole window: run "$T" listen in the background. It waits on the CLI's WebSocket (real-time, no tokens while waiting; degrades to polling if the WS is unavailable) and exits with either:
   • REPLY_RECEIVED: + the message → act on it (then update with the result), and relaunch listen for the remaining window; or
   • TETHER_EXPIRED → the window is up; run "$T" stop. Replies are deduped by message-id and survive e2a's async parse, so none are dropped or repeated. (poll is the same one-shot check if you want it manually.)
6. Stop when the user replies stop/done, the window expires, or the work is complete: "$T" stop.

Writing good emails

The recipient is a person reading email (often on a phone), not a terminal. Write for that medium, not for a CLI.

HTML (update --html <file> — the default; use it for any substantive update):

• HTML renders far better than plain text in real mail clients. Reach for it for anything beyond a quick one-liner: a status update, a summary, a question with options, a diagram, a table, a before/after.
• Mobile-first (learned the hard way): max-width:~480px, inline styles only (email strips <style>/<head>), readable sizes (14–15px), and a vertical/stacked layout. Avoid wide tables and big ASCII in <pre> — they force horizontal scroll and shrink to unreadable on phones.
• Prefer real elements (stacked <div> boxes, small <table>s) over ASCII art.
• Use a system font stack; keep colors subtle. update auto-derives the plain-text fallback, so HTML sends are always safe.

Plain text (update "<text>" — quick one-liner acks only):

• Fine for a fast acknowledgement ("on it — rerunning the tests") or a single-sentence status. Anything with structure should be HTML.
• No markdown — **bold**, `code`, # headings render as literal characters in a plain-text email. Use plain prose.
• Note: ask bodies are plain-text only (no --html) — keep questions short and prose-only there. --attach does work on ask: attach the artifact the decision hinges on (a diff, a mockup) rather than describing it.

Both:

• Lead with the takeaway (what changed / what you need), then details. Keep it short and scannable.
• Be concrete: name the file / PR / decision ("merged #357"), not "did some work".
• If you need something, end with one clear ask ("Reply A or B?").
• No large code/log dumps — summarize or link. Don't paste stack traces. If the artifact itself matters (a rendered PDF, a screenshot, a report), send it as an attachment (--attach) instead of inlining it.
• Acknowledge fast. When a reply comes in, a quick "on it — doing X" beats silence; there's inherent email latency, so don't leave the user wondering if you heard them.
• Keep it in one thread — always update, never a fresh send. tether.sh threads by replying (In-Reply-To/References + a stable subject), which is what Gmail/Outlook actually stitch on. e2a threads on conversation_id, but Gmail ignores that — so a fresh send in the same e2a conversation still lands as a second thread in the user's inbox (the split Gmail showed). While tethered, send every update through "$T" update (it replies into the thread); do not reach for the e2a MCP send_message or start a new subject to reach the user mid-session. One session = one thread = one subject.

Wait behavior & knobs

listen/ask block on the e2a CLI's WebSocket wait (no LLM tokens while waiting), so reply latency is seconds. The poll interval only matters as the degraded cadence when the WebSocket is unavailable, and as the backfill check between waits. The agent is only woken (a real turn) when a reply actually lands.

env var	default	effect
E2A_TETHER_POLL_INTERVAL	20 (s)	fallback poll cadence when the WS wait is unavailable
E2A_TETHER_ASK_TIMEOUT	1800 (s)	how long ask blocks for an answer before giving up
E2A_BASE_URL	https://api.e2a.dev	API base (set for self-host)
E2A_CLI	(auto)	override the e2a CLI invocation (e.g. node /repo/cli/dist/bin/e2a.js)

The only thing that costs a turn per tick is a /loop heartbeat (tier 2 below) — keep that coarse (e.g. 30m).

Durability tiers

1. In-session (default): listen polls for the whole --for window — automatic while the terminal stays open, and cheap (curl only, no tokens). This is what the duration setup buys you: one long-lived poller, not manual restarts. Add listen --awake to keep the machine from idle-sleeping during the window (macOS caffeinate, auto-released when listening ends). Note: --awake does not survive closing the lid (macOS clamshell still sleeps) — that's tier 3.
2. Heartbeat (optional): a slow /loop (e.g. every 30m) can relaunch listen if it dies and keep the session warm. /loop wakes the agent (a full turn each tick) — use it as a supervisor, not the poller.
3. Always-on (survives a closed laptop): nothing in-session outlives a closed terminal, regardless of duration — that needs an e2a webhook firing a cloud Routine (a fresh session per fire, loses live context). Follow-on.

Multiple sessions

Each start opens a dedicated email thread (fresh conversation id, its own subject; replies anchor by In-Reply-To), and local state is keyed per repo (git toplevel), so tethered sessions in different repos coexist without touching each other's thread, watermark, or ask-lock. Within one repo, start refuses to arm over a live session instead of silently hijacking its thread. To run a second session in the same repo, start it with --parallel: it self-keys a fresh state file and prints a TETHER_STATE="…" handle — prefix every subsequent tether call in that session with it (TETHER_STATE="…" "$T" update …), and pass a distinct --title so the inbox threads are tellable apart. Forgetting the prefix is warned about (commands notice parallel peers exist) and every send echoes its thread id, so misdirection is observable. (A pre-existing machine-global state.json from an older tether keeps working until its session stops — note that WHILE it exists it shadows repo keying, so it also blocks start in other repos; stop that session to retire it.)

Files

file	role
tether.sh	runtime CLI: setup / start --title [--for] [--parallel] / update [--html] [--attach] / ask [--attach] / listen / poll / status / stop
lib.sh	config + e2a-CLI resolution (t_cli) + send/reply/wait helpers
hooks/tether-notify.sh	optional Notification hook (blocked-alert)
install.sh	wire/unwire the Notification hook; _selftest
tether.env.example	credentials template