pmm-hydrate

name	pmm-hydrate
description	Populate empty or thin memory files from current session context. Supports single file, batch, and force re-hydration. Trigger on: "pmm-hydrate", "/pmm-hydrate", "hydrate memory", "populate memory", "fill in memory files", "hydrate files", "backfill memory", or any request to populate empty or thin memory files from existing context.

pmm-hydrate

Populate empty or thin memory files from existing session context and loaded memory. Use when:

• A new memory file was added (via pmm-update) but the memory/ directory already has populated files
• A previously deactivated file is re-activated via pmm-settings
• A file exists but contains only template boilerplate — no real content

This is not a greenfield operation. If memory files are already populated, they contain history that should inform every new file. Hydrate before the first maintain cycle runs on a new file. An empty file that gets maintained stays shallow. A hydrated file starts with the full context the system already has.

---

Argument Parsing

Parse $ARGUMENTS:

Argument	Mode
(no args)	Show usage hint
--all or all	Batch mode — hydrate all template-only files
<filename>	Single file mode — hydrate one named file
<filename> --force or --force <filename>	Force mode — re-hydrate even if file has content
--all --force	Force batch mode — re-hydrate all active files

Read memory/config.md to determine which files are active. Only operate on active files.

---

No-Args: Usage Hint

If $ARGUMENTS is empty, output usage and list active files:

pmm-hydrate — populate memory files from existing context

Usage:
  pmm-hydrate --all            hydrate all empty/stub files
  pmm-hydrate <file>           hydrate one file (e.g. voices.md)
  pmm-hydrate <file> --force   re-hydrate even if already populated
  pmm-hydrate --all --force    re-hydrate all active files

Active files (from memory/config.md):
  [list active files with status: populated / template-only / empty]

Read each active file. A file is "template-only" if, after stripping blank lines, comment lines (<!--), and heading lines (#), it has fewer than 3 lines of content.

---

Template-Only Detection

Before dispatching any agent, read each candidate file and classify:

Read memory/<file>
Strip: blank lines, comment lines (<!-- ... -->), heading lines (# ...)
Count remaining content lines
If count < 3 → template-only (candidate for hydration)
If count ≥ 3 → populated (skip unless --force)

Apply this check in main context — no agent needed for detection.

---

Single File Mode

One file specified, no --force.

1. Check if the file is template-only. If populated (≥ 3 content lines), output:

   memory/<file> already has content. Use --force to re-hydrate.
   

   Stop.

2. If template-only (or --force), dispatch a single foreground agent (not background — agents need Edit/Write permissions):

   Hydrate a memory file from existing memory. This is a WRITE task — edit the target file only. Do NOT run git commands.

   Target file: memory/<filename> Purpose: <what this file captures — infer from filename and core.md> Template structure: Read ${CLAUDE_PLUGIN_ROOT}/references/templates.md for the correct format for this file type before writing.

   Instructions:

   1. Read ${CLAUDE_PLUGIN_ROOT}/references/templates.md and locate the template for <filename>. Use it as the structural skeleton for your output — follow its format exactly.
   2. Read ALL populated memory files to build context:
      • memory/timeline.md, memory/summaries.md — what happened over time
      • memory/decisions.md — what was decided and why
      • memory/lessons.md — what went wrong and what to do instead
      • memory/preferences.md — how the user works
      • memory/processes.md — established workflows
      • memory/standinginstructions.md — persistent rules
      • memory/memory.md — long-term facts
      • memory/assets.md — people, tools, systems
      • memory/graph.md, memory/vectors.md — relationships and similarities
      • memory/last.md, memory/progress.md — recent context Skip any file that doesn't exist or is template-only — no useful signal there.
   3. Infer content for memory/<filename> based on what the existing files reveal.
      • Do not copy content verbatim — synthesise. Each file has one job.
      • Only add entries you can justify from the existing memory. Never hallucinate.
      • Use [system:hydrate] as the attribution tag for all hydrated entries (applies to decisions.md, timeline.md, lessons.md, standinginstructions.md, last.md).
   4. Write the inferred content to memory/<filename>.
   5. Return a brief summary: what was inferred and which source files informed it.

   Use Maintain Agent Model from memory/config.md as the agent model. Default: haiku.

3. After the agent returns, main context commits:

   git add memory/<filename> && git commit -m "memory: hydrate <filename> from existing memory"
   

4. Report what was hydrated.

---

Batch Mode (--all)

Two or more files need hydrating. Use a single agent — reads context once, writes all targets. More efficient than one agent per file.

1. Scan all active files (from memory/config.md). Classify each as template-only or populated (see detection logic above).

2. If --force is NOT set: collect only template-only files as targets. If no template-only files found:

   All active files are already populated. Use --force to re-hydrate.
   

   Stop.

3. If --force IS set: all active files are targets (excluding secrets.md — always excluded, never touched).

4. Report targets before dispatching:

   Hydrating <N> files: <file1>, <file2>, ...
   

5. Dispatch a single foreground agent:

   Hydrate multiple memory files from existing memory. This is a WRITE task — edit the target files only. Do NOT run git commands.

   Target files: <comma-separated list> References directory: ${CLAUDE_PLUGIN_ROOT}/references/

   Instructions:

   1. Read ${CLAUDE_PLUGIN_ROOT}/references/templates.md. For each target file, locate its template section and use it as the structural skeleton.
   2. Read ALL populated memory files to build context:
      • memory/timeline.md, memory/summaries.md — what happened over time
      • memory/decisions.md — what was decided and why
      • memory/lessons.md — what went wrong and what to do instead
      • memory/preferences.md — how the user works
      • memory/processes.md — established workflows
      • memory/standinginstructions.md — persistent rules
      • memory/memory.md — long-term facts
      • memory/assets.md — people, tools, systems
      • memory/graph.md, memory/vectors.md — relationships and similarities
      • memory/last.md, memory/progress.md — recent context Skip non-existent or template-only files — no useful signal there.
   3. For EACH target file, infer appropriate content from the existing files.
      • Do not copy content verbatim — synthesise. Each file has one job.
      • Use the correct format from templates.md for each file type.
      • Only add entries you can justify from existing memory. Never hallucinate.
      • Use [system:hydrate] as the attribution tag for all hydrated entries (applies to decisions.md, timeline.md, lessons.md, standinginstructions.md, last.md).
      • Special rules per file:
        • graph.md edges are append-only — write new edges only, never modify existing entries
        • vectors.md embedding registry is append-only — clusters/similarities are living
        • decisions.md, lessons.md, standinginstructions.md are append-only — write new entries only
        • last.md is always replaced entirely — write the full current-state window
   4. Write inferred content to each target file.
   5. Return a brief summary per file: what was inferred and which source files contributed.

   Use Maintain Agent Model from memory/config.md. Default: haiku.

6. After the agent returns, main context commits:

   git add memory/ && git reset HEAD memory/secrets.md 2>/dev/null; git commit -m "memory: hydrate <file1>, <file2>, ... from existing memory"
   

7. Report the summary per file.

---

Force Mode

--force with a single file: skip the template-only check, always dispatch the agent. Useful when a file has content but it's stale or thin.

--force with --all: re-hydrate every active file, whether populated or not.

In force mode, the agent prompt is identical — the distinction is only in whether the detection gate fires.

---

Rules

• secrets.md is never touched — excluded from all hydration operations, batch or single
• config.md is never a hydration target — it controls the system, not records history
• Agents edit files only — main context handles all git commits
• Background agents (run_in_background: true) do not inherit Edit/Write permissions — always dispatch as foreground agents
• For batch mode, dispatch ONE agent for all targets — do not dispatch one agent per file (reads context once, writes all targets)
• Only hydrate files marked active in memory/config.md
• If a file does not exist yet, create it from the template in ${CLAUDE_PLUGIN_ROOT}/references/templates.md before dispatching the hydration agent
• Hydrate before the first maintain cycle touches a new file — empty files that get maintained stay shallow

---

After Hydration

After hydration, the new file will be picked up automatically by the SessionStart hook if it's listed as active in config.md. No CLAUDE.md changes needed — hooks handle loading.