Plan and operate Salesforce org-wide multi-factor authentication (MFA) enforcement: verification methods, phased rollout, SSO and API-only considerations, exemptions, and operational readiness. NOT for designing Login Flow post-authentication logic, IP allowlists, or conditional step-up policies—use ip-range-and-login-flow-strategy, network-security-and-trusted-ips, or transaction-security-policies instead.
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Une commande directe contourne le prompt de vérification. Examinez la source avant de l'exécuter.
Plan and operate Salesforce org-wide multi-factor authentication (MFA) enforcement: verification methods, phased rollout, SSO and API-only considerations, exemptions, and operational readiness. NOT for designing Login Flow post-authentication logic, IP allowlists, or conditional step-up policies—use ip-range-and-login-flow-strategy, network-security-and-trusted-ips, or transaction-security-policies instead.
category
security
salesforce-version
Spring '25+
well-architected-pillars
["Security","Operational Excellence"]
triggers
["We need an MFA enforcement strategy for our Salesforce org before we turn on org-wide MFA","How do we roll out Salesforce multi-factor authentication without breaking integrations and SSO users","Which verification methods count for Salesforce MFA and when does SAML SSO satisfy the MFA requirement","Who can be exempt from org-wide MFA enforcement and how do we document API-only integration users","Our security team wants a checklist for Salesforce MFA contractual requirement and production org defaults","What changes in the 2026 Salesforce MFA enforcement and which permissions require phishing-resistant MFA"]
["Identity model: SSO (SAML/OIDC) vs Salesforce local login, and whether direct login to Salesforce is still allowed","User populations: employees, contractors, service accounts, integration users, Experience Cloud or community logins in scope","Current verification methods registered and support model (help desk, device loss, travel)"]
outputs
["A phased rollout plan with communications, exception handling, and validation gates","Decision record for verification methods, IdP MFA posture, and exemption criteria aligned to official Salesforce guidance"]
dependencies
[]
version
1.1.0
author
Pranav Nagrecha
updated
"2026-07-08T00:00:00.000Z"
MFA Enforcement Strategy
Use this skill when you are defining how an organization turns on and sustains multi-factor authentication (MFA) for Salesforce human and non-human identities—not when you are wiring conditional challenges, IP-based login rules, or Flow-based login experiences. It focuses on org-wide enforcement posture, supported verification methods, Single Sign-On (SSO) delegation, exemptions, and the operational work that keeps logins working under pressure.
Before Starting
Gather this context before working on anything in this domain:
How users authenticate today: Salesforce username and password only, hybrid SSO plus occasional direct login, or SSO-only with the Identity Provider (IdP) as the primary gate.
Integration surface: Which workloads use UI sessions versus OAuth/JWT/API-only patterns, and which accounts are true automation principals versus humans using API access.
Regulatory or contractual drivers: MFA is a baseline control in Salesforce contracts and security baselines; your program still needs a rollout plan, support playbooks, and exception governance regardless of what the platform enforces by default.
Core Concepts
The 2026 enforcement events
Salesforce is "enforcing Multi-Factor Authentication (MFA) for all employee logins, including direct UI and Single Sign-On (SSO), across both production and sandbox orgs." Two waves land on different dates, so a single "MFA deadline" on your program plan is already wrong:
Enforcement
Sandboxes
Production
MFA for all employee users
Starting June 22, 2026, staggered over approximately 7 days
Starting July 20, 2026, staggered over approximately 30 days
Phishing-resistant MFA (PRMFA) for privileged users, including admins
Starting June 22, 2026, staggered over approximately 7 days
Starting July 1, 2026, staggered over approximately 30 days
Two levers you may be relying on today disappear: the org-wide MFA setting becomes active and admins "no longer have the ability to deselect or disable it," and the Waive Multi-Factor Authentication for Exempt Users permission "no longer automatically exempt[s] users from MFA"—holders are "prompted to enroll and use an MFA verifier at login." Rewrite any exemption-dependent runbook against the sandbox date, which arrives first and is where you will discover what breaks.
SSO does not clear the bar by itself. An SSO login satisfies enforcement only where the IdP passes a standard-MFA or phishing-resistant-MFA signal to Salesforce via ACR (Authentication Context Class Reference) or AMR (Authentication Methods Reference, RFC 8176). Where the IdP sends no such signal, those users are "required to enroll an MFA verifier in the Salesforce UI"—so an IdP that enforces MFA but omits the claim still produces a visible change for every SSO user.
Phishing-resistant MFA and the permissions that trigger it
PRMFA applies to users with the System Administrator profile or any one of Modify All Data, View All Data, Customize Application, or Author Apex. Those four permissions travel on ordinary permission sets and permission set groups, so the PRMFA population is routinely far larger than the admin headcount—enumerate it from effective permission assignments, never from the profile name alone.
Counts as phishing-resistant
Does not count
Built-in authenticators (Touch ID, Windows Hello)
Salesforce Authenticator
Passkeys—device-bound, or cloud-synced through a password manager or keychain (1Password, Bitwarden, iCloud Keychain) provided that manager is FIDO2/WebAuthn-compliant
Mobile TOTP apps (for example, Google or Microsoft Authenticator)
External FIDO2/WebAuthn security keys (for example, YubiKey)
Certificate-based authentication using x.509 client certificates
Admin-generated temporary verification codes
Salesforce Authenticator and TOTP apps remain valid standard MFA. They simply do not satisfy the privileged-user requirement, which is the detail that strands admin populations who "already did MFA years ago."
Org-wide enforcement versus user self-registration
Salesforce distinguishes requiring MFA for direct logins to the Salesforce UI from users casually adding a verification method. Org-wide enforcement changes the login outcome for every in-scope user until they satisfy the requirement or a documented exemption applies. Treat enforcement as a program: communications, help desk readiness, backup codes or device replacement, and executive sponsorship matter as much as the toggle in Setup.
Supported verification methods (product surface)
Salesforce documents several strong factors suitable for most employees, including Salesforce Authenticator (push or code), time-based one-time password (TOTP) applications, FIDO2/WebAuthn security keys, and platform authenticators where supported. Pick a small approved set for the enterprise so help desk procedures stay consistent; avoid an unbounded list of consumer apps unless support teams are staffed for it.
SSO and MFA delegation
When users access Salesforce exclusively through SSO where the IdP enforces MFA, Salesforce can treat that path as satisfying the MFA expectation for those users—provided direct Salesforce login is not a realistic bypass (for example, broad password-based login still enabled for the same population). The failure mode is familiar: SSO is “MFA protected” but a subset of users retains a Salesforce password path and never registers a second factor with Salesforce. Validate both the IdP authentication policy and Salesforce login channels together.
Exemptions and integration identities
Some categories of users or flows may be excluded or handled differently under documented Salesforce exemption patterns (for example narrowly scoped automation or legacy constraints). Exemptions should be time-bound, approved, and rare—each one is debt that auditors and incident responders will ask about. Prefer modern patterns for integration users (OAuth flows designed for automation) over stretching human MFA policies across machine principals.
Common Patterns
Phased rollout by persona
When to use: Medium and large orgs where a single “big bang” cutover risks revenue or operations.
How it works: Pilot with IT and admins, then business units, then contractors. Run parallel reporting on who has not registered a verification method. Pair each phase with office hours and scripted recovery steps.
Why not the alternative: Flipping enforcement for everyone at once without inventorying SSO bypass and integrations produces preventable lockouts and emergency rollbacks.
SSO-first with Salesforce direct login disabled for employees
When to use: Enterprise standard is SAML or OpenID Connect from a central IdP with strong MFA at the IdP.
How it works: Align IdP MFA with corporate policy, remove or tightly control Salesforce direct login for employee populations, and validate break-glass admin paths.
Why not the alternative: Leaving parallel login paths defeats the economic and security rationale of central MFA and complicates attestation.
Verification method standardization plus security key program
When to use: High-assurance teams (finance, admins, developers with deployment rights).
How it works: Offer FIDO2 keys and documented provisioning; keep TOTP as fallback where keys are impractical.
Why not the alternative: Push-only reliance on a single mobile OS vendor stack can stall travelers or regulated sites where phones are restricted.
Inventory authentication paths — List IdP connections, remaining Salesforce-password users, Experience Cloud or external identity usage, and integration accounts.
Read current org posture — From Setup and, where available, retrieved Security.settings metadata, note org-wide MFA-related settings and session policies (without conflating unrelated session controls with MFA).
Choose allowed verification methods — Publish the approved set, procurement for keys if needed, and help desk scripts for device loss.
Close bypasses before enforcement — Address direct login, dormant passwords, and shared accounts that cannot complete MFA personally.
Pilot and measure — Track registration completion, failed logins, and integration errors; adjust communications and training.
Enable enforcement with rollback owners — Name who can act during an incident and rehearse break-glass; once the enforcement dates pass, rehearse verification-method recovery, because disabling the setting is no longer available.
Run the local checker — From repo root: python3 skills/security/mfa-enforcement-strategy/scripts/check_mfa_enforcement_strategy.py (add --manifest-dir for optional Security.settings-meta.xml review).
Review Checklist
Run through these before marking work in this area complete:
SSO and direct-login posture documented; no silent bypass for the populations in scope
Verification methods standardized; help desk trained on recovery
Integration and automation accounts reviewed; exemptions documented with owners and expiry
Executive and legal/compliance stakeholders aligned on timelines and residual risk
Post-cutover monitoring for login failures and IdP saturation
Salesforce-Specific Gotchas
Trusted IP ranges do not replace MFA — Network trust features address different threats; do not assume office IPs negate MFA expectations for human UI login.
SSO “MFA” at the IdP does not help if users can still complete a sensitive workflow via an unaudited Salesforce password session; channel inventory is essential.
Automation accounts are not humans — Applying human MFA workflows to integration users without redesigning the auth pattern causes outages; treat them as a separate workstream.
"Turn MFA off" stops being a rollback path — After enforcement, the org-wide MFA setting cannot be deselected and the exemption permission no longer waives MFA. Any runbook whose incident step is "disable the setting" is void; your levers become verification-method recovery—including admin-generated temporary verification codes—and access restoration.
Output Artifacts
Artifact
Description
MFA rollout runbook
Phases, owners, communications, and rollback criteria
Exception register
Each exemption with business justification, approver, and review date
Authentication architecture note
SSO, direct login, and API flows in one diagram or table
Related Skills
ip-range-and-login-flow-strategy — Login Flows, session policies, and IP-based login design (not org-wide MFA program management)
network-security-and-trusted-ips — Trusted IP ranges and network-level controls
transaction-security-policies — Targeted step-up and policy enforcement on events
integration-user-management — Integration users, OAuth/JWT patterns, and MFA waivers where applicable
