drone-operations

Étoiles11

Forks4

Mis à jour4 juillet 2026 à 12:25

Operational runbook for the Tello/RMTT drone agent — flight, telemetry, and camera via the drone MCP tools.

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Source

sebbycorp

sebbycorp/k8s-iceman

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Métiers associésSOC

Basé sur la classification professionnelle SOC

Ingénieurs électroniques (sauf informatique)Architecture et ingénierie·SOC 17-2072

SKILL.md

readonly

name	drone-operations
description	Operational runbook for the Tello/RMTT drone agent — flight, telemetry, and camera via the drone MCP tools.

Drone Operations Runbook

You control a Ryze RoboMaster TT (RMTT) quadcopter over the Tello SDK via the drone MCP tools. The MCP server owns the drone's UDP link directly.

Facts

Drone static IP 172.16.10.168; SDK protocol v30. Command UDP 8889, state 8890, video 11111.
Battery drains while powered on (even idle on WiFi) and only charges while OFF. Takeoff below 15% is refused by the driver. Treat <30% as "land soon".
It is an RMTT, so EXT commands work via send_command (LED matrix, top LED, ToF): e.g. EXT mled s r heart, EXT mled r b 0.5 HI.

Tools

get_state — connected flag + telemetry (bat %, h height cm, pitch/roll/yaw, baro, temph). Start here to confirm the drone is connected and check battery.
Flight: takeoff, land, emergency (motor cut — real emergencies only), move(direction, distance_cm) (up/down/left/right/forward/back, 20-500), rotate(direction, degrees) (cw/ccw, 1-360), flip(direction) (f/b/l/r).
Camera: take_photo (returns the image — you can see and describe it), start_recording / stop_recording (mp4), list_media, get_media(name).
LED matrix: set_led_text(text, color, direction, rate) scrolls any message across the 8x8 matrix (color r/b/p, direction l/r/u/d, rate 0.1-2.5); clear_led blanks it.
send_command(command) — raw SDK passthrough for anything else, including other EXT.

Operating notes

Before flying, call get_state to confirm connected: true and read bat.
After any takeoff, be ready to land. Fly in small move increments.
If get_state shows connected: false or tools time out, the drone is powered off or off-network — say so rather than retrying blindly.
To "look around", take_photo and describe what you see; use move/rotate between shots.

Plus depuis ce dépôt

même dépôt

agentevals-website-contribution

sebbycorp/k8s-iceman

Contribution workflow for the agentevals-agent — branch naming, Hugo front matter, adding/editing docs pages, and PR conventions for the agentevals-dev/website repo.

2026-06-2911

kubernetes-troubleshooting

sebbycorp/k8s-iceman

Step-by-step diagnostics for a Kubernetes agent — CrashLoopBackOff, Pending pods, image pull failures, OOMKills, and high-latency investigation.

2026-06-2911

f5-bigip-operations

sebbycorp/k8s-iceman

Operational runbook for the F5 BIG-IP agent — safe procedures for draining pool members, HA-aware writes, certificate expiry checks, and diagnosing offline members.

2026-06-0911

fortigate-firewall-operations

sebbycorp/k8s-iceman

Operational runbook for the FortiGate agent — safe device blocking, firewall policy audits, overly-permissive rule detection, and wireless client troubleshooting.

2026-06-0911

vault-operations

sebbycorp/k8s-iceman

Operational runbook for the vault-agent — safe secret handling, mount-deletion safety, PKI best practices, and how Vault feeds this cluster via External Secrets.

2026-06-0911

name	drone-operations
description	Operational runbook for the Tello/RMTT drone agent — flight, telemetry, and camera via the drone MCP tools.

Drone Operations Runbook

You control a Ryze RoboMaster TT (RMTT) quadcopter over the Tello SDK via the drone MCP tools. The MCP server owns the drone's UDP link directly.

Facts

Drone static IP 172.16.10.168; SDK protocol v30. Command UDP 8889, state 8890, video 11111.
Battery drains while powered on (even idle on WiFi) and only charges while OFF. Takeoff below 15% is refused by the driver. Treat <30% as "land soon".
It is an RMTT, so EXT commands work via send_command (LED matrix, top LED, ToF): e.g. EXT mled s r heart, EXT mled r b 0.5 HI.

Tools

get_state — connected flag + telemetry (bat %, h height cm, pitch/roll/yaw, baro, temph). Start here to confirm the drone is connected and check battery.
Flight: takeoff, land, emergency (motor cut — real emergencies only), move(direction, distance_cm) (up/down/left/right/forward/back, 20-500), rotate(direction, degrees) (cw/ccw, 1-360), flip(direction) (f/b/l/r).
Camera: take_photo (returns the image — you can see and describe it), start_recording / stop_recording (mp4), list_media, get_media(name).
LED matrix: set_led_text(text, color, direction, rate) scrolls any message across the 8x8 matrix (color r/b/p, direction l/r/u/d, rate 0.1-2.5); clear_led blanks it.
send_command(command) — raw SDK passthrough for anything else, including other EXT.

Operating notes

Before flying, call get_state to confirm connected: true and read bat.
After any takeoff, be ready to land. Fly in small move increments.
If get_state shows connected: false or tools time out, the drone is powered off or off-network — say so rather than retrying blindly.
To "look around", take_photo and describe what you see; use move/rotate between shots.