shiny-obd

name	shiny-obd
description	Generate code using Shiny.Obd, an OBD-II vehicle communication library for .NET with command-object pattern, adapter auto-detection, and BLE transport
auto_invoke	true
triggers	["obd","obd-ii","obd2","vehicle diagnostics","elm327","obdlink","IObdCommand","IObdConnection","IObdTransport","IObdDeviceScanner","ObdDiscoveredDevice","BleObdDeviceScanner","ObdCommand","ObdConnection","StandardCommands","vehicle speed","engine rpm","coolant temperature","throttle position","vin command","obd ble","BleObdTransport","obd adapter","obd scan","device scanner","adapter profile","Shiny.Obd","AddShinyObdBluetoothLE"]

Shiny.Obd Skill

Triggers

• obd
• obd-ii
• obd2
• vehicle diagnostics
• elm327
• obdlink
• IObdCommand
• IObdConnection
• IObdTransport
• IObdDeviceScanner
• ObdDiscoveredDevice
• BleObdDeviceScanner
• ObdCommand
• ObdConnection
• StandardCommands
• vehicle speed
• engine rpm
• coolant temperature
• throttle position
• vin command
• obd ble
• BleObdTransport
• obd adapter
• obd scan
• device scanner
• adapter profile
• Shiny.Obd
• AddShinyObdBluetoothLE

You are an expert in Shiny.Obd, a .NET library for communicating with vehicles through OBD-II adapters. It uses a command-object pattern with generic return types, pluggable transports (BLE first), and adapter auto-detection for ELM327 and OBDLink (STN) adapters.

When to Use This Skill

Invoke this skill when the user wants to:

• Read vehicle data (speed, RPM, coolant temp, VIN, etc.) through OBD-II
• Create custom OBD commands with typed return values
• Connect to an OBD-II adapter over Bluetooth LE
• Scan for / discover available OBD adapters
• Configure ELM327 or OBDLink adapter initialization
• Implement a custom transport (WiFi, USB) for OBD communication
• Send raw AT commands to an OBD adapter
• Handle OBD response parsing and error handling
• Build a MAUI app with OBD integration

Library Overview

• Repository: https://github.com/shinyorg/obd
• Namespaces: Shiny.Obd, Shiny.Obd.Ble, Shiny.Obd.Commands
• NuGet: Shiny.Obd (core), Shiny.Obd.Ble (BLE transport)
• Targets: net10.0 (core), net10.0 (BLE)

Core Types

IObdCommand — Command interface

Every OBD command implements this. T is the parsed result type.

public interface IObdCommand<T>
{
    string RawCommand { get; }
    T Parse(byte[] data);
}

ObdCommand — Base class for standard Mode/PID commands

Validates mode+PID response header, strips it, and delegates to ParseData.

public abstract class ObdCommand<T> : IObdCommand<T>
{
    protected ObdCommand(byte mode, byte pid);
    public byte Mode { get; }
    public byte Pid { get; }
    public virtual string RawCommand { get; } // "{Mode:X2}{Pid:X2}"
    protected abstract T ParseData(byte[] data); // data after header
}

IObdConnection — Connection interface

public interface IObdConnection : IAsyncDisposable
{
    bool IsConnected { get; }
    Task Connect(CancellationToken ct = default);
    Task Disconnect();
    Task<T> Execute<T>(IObdCommand<T> command, CancellationToken ct = default);
    Task<string> SendRaw(string command, CancellationToken ct = default);
}

IObdTransport — Transport abstraction

public interface IObdTransport : IAsyncDisposable
{
    bool IsConnected { get; }
    Task Connect(CancellationToken ct = default);
    Task Disconnect();
    Task<string> Send(string command, CancellationToken ct = default);
}

IObdDeviceScanner — Device discovery

public interface IObdDeviceScanner
{
    Task Scan(Action<ObdDiscoveredDevice> onDeviceFound, CancellationToken ct = default);
}

Cancel the token to stop scanning. Each discovered device invokes the callback.

ObdDiscoveredDevice — Discovered adapter

public class ObdDiscoveredDevice
{
    public string Name { get; }        // e.g. "OBDLink MX+"
    public string Id { get; }          // unique identifier (BLE UUID, IP, etc.)
    public object NativeDevice { get; } // IPeripheral for BLE, IPEndPoint for WiFi, etc.
}

ObdConnection — ELM327 protocol handler

Two constructors:

• ObdConnection(IObdTransport transport) — auto-detects adapter via ATI
• ObdConnection(IObdTransport transport, IObdAdapterProfile profile) — uses explicit profile, skips detection

Properties:

• DetectedAdapter — ObdAdapterInfo? with RawIdentifier (string) and Type (ObdAdapterType enum: Unknown, Elm327, ObdLink). Null when explicit profile used.

Handles:

• ELM327 hex response parsing (single-line and multi-frame CAN)
• Error detection: "NO DATA", "UNABLE TO CONNECT", "BUS INIT: ...ERROR", "?"
• Strips "SEARCHING..." and "BUS INIT" prefixes

IObdAdapterProfile — Adapter initialization

public interface IObdAdapterProfile
{
    string Name { get; }
    Task Initialize(IObdConnection connection, CancellationToken ct = default);
}

Built-in profiles:

• Elm327AdapterProfile — ATZ, ATE0, ATL0, ATS1, ATH0, ATSP0
• ObdLinkAdapterProfile — extends Elm327 with STFAC, ATCAF1

Standard Commands (StandardCommands static class)

Property	Type	Command	Return	Parse Formula
VehicleSpeed	VehicleSpeedCommand	010D	int (km/h)	A
EngineRpm	EngineRpmCommand	010C	int (RPM)	((A*256)+B)/4
CoolantTemperature	CoolantTemperatureCommand	0105	int (°C)	A-40
ThrottlePosition	ThrottlePositionCommand	0111	double (%)	(A*100)/255
FuelLevel	FuelLevelCommand	012F	double (%)	(A*100)/255
CalculatedEngineLoad	CalculatedEngineLoadCommand	0104	double (%)	(A*100)/255
IntakeAirTemperature	IntakeAirTemperatureCommand	010F	int (°C)	A-40
RuntimeSinceStart	RuntimeSinceStartCommand	011F	TimeSpan	(A*256)+B seconds
Vin	VinCommand	0902	string	skip count byte, ASCII decode

BLE Transport (Shiny.Obd.Ble)

BleObdConfiguration

public class BleObdConfiguration
{
    public string ServiceUuid { get; set; } = "FFF0";
    public string ReadCharacteristicUuid { get; set; } = "FFF1";
    public string WriteCharacteristicUuid { get; set; } = "FFF2";
    public string? DeviceNameFilter { get; set; }
    public TimeSpan CommandTimeout { get; set; } = TimeSpan.FromSeconds(10);
}

BleObdTransport

Three constructors:

• BleObdTransport(IBleManager bleManager, BleObdConfiguration config) — scans for adapter
• BleObdTransport(IPeripheral peripheral, BleObdConfiguration config) — uses pre-discovered peripheral
• BleObdTransport(ObdDiscoveredDevice device, BleObdConfiguration config) — uses device from scanner

Uses Shiny.BluetoothLE v4 APIs:

• ConnectAsync for task-based connection
• NotifyCharacteristic for RX notifications
• WriteCharacteristicAsync for TX writes
• Collects notification bytes until > prompt, returns complete response

Code Generation Patterns

Creating a custom OBD command (standard PID)

public class BarometricPressureCommand : ObdCommand<int>
{
    public BarometricPressureCommand() : base(0x01, 0x33) { }
    protected override int ParseData(byte[] data) => data[0];
}

Creating a custom OBD command (non-standard)

public class ManufacturerCommand : IObdCommand<string>
{
    public string RawCommand => "2101";
    public string Parse(byte[] data) => BitConverter.ToString(data);
}

Full connection setup with BLE

var transport = new BleObdTransport(bleManager, new BleObdConfiguration
{
    DeviceNameFilter = "OBDLink"
});
var connection = new ObdConnection(transport);
await connection.Connect();

var speed = await connection.Execute(StandardCommands.VehicleSpeed);
var rpm = await connection.Execute(StandardCommands.EngineRpm);
var vin = await connection.Execute(StandardCommands.Vin);

Scanning for devices then connecting

var scanner = new BleObdDeviceScanner(bleManager);
var cts = new CancellationTokenSource();
ObdDiscoveredDevice? selected = null;

await scanner.Scan(device =>
{
    selected = device;
    cts.Cancel(); // stop after first device
}, cts.Token);

var transport = new BleObdTransport(selected!, new BleObdConfiguration());
var connection = new ObdConnection(transport);
await connection.Connect();

MAUI DI registration

// In MauiProgram.cs
builder.Services.AddBluetoothLE();  // Shiny BLE v4 — namespace: Shiny
builder.Services.AddShinyObdBluetoothLE(new BleObdConfiguration
{
    DeviceNameFilter = "OBD"
});

AddShinyObdBluetoothLE registers BleObdConfiguration and IObdDeviceScanner (BleObdDeviceScanner). Call AddBluetoothLE() separately for platform BLE support.

Explicit adapter profile

var connection = new ObdConnection(transport, new ObdLinkAdapterProfile());
await connection.Connect();

Custom adapter profile

public class MyAdapterProfile : IObdAdapterProfile
{
    public string Name => "MyAdapter";
    public async Task Initialize(IObdConnection connection, CancellationToken ct = default)
    {
        await connection.SendRaw("ATZ", ct);
        await Task.Delay(500, ct);
        await connection.SendRaw("ATE0", ct);
        await connection.SendRaw("ATSP6", ct); // force CAN 11-bit 500kbaud
    }
}

Custom transport implementation

public class WifiObdTransport : IObdTransport
{
    public bool IsConnected { get; private set; }
    public async Task Connect(CancellationToken ct = default) { /* TCP connect */ }
    public Task Disconnect() { /* close socket */ }
    public async Task<string> Send(string command, CancellationToken ct = default)
    {
        // Write command, read until '>' prompt, return response without '>'
    }
    public ValueTask DisposeAsync() { /* cleanup */ }
}

Important Notes

• All async methods do NOT use the Async suffix (e.g. Connect, Execute, SendRaw).
• ObdCommand<T>.ParseData receives bytes AFTER the 2-byte mode+PID header is stripped.
• IObdCommand<T>.Parse receives ALL response bytes including mode+PID header.
• ObdConnection appends \r to all commands sent via SendRaw before passing to transport.
• BLE transport uses SemaphoreSlim to serialize commands (one at a time).
• ELM327 response parser handles both single-line ("41 0D 50") and multi-frame CAN ("0: 49 02 01 57 42\r1: 41 30...") formats.
• BleObdDeviceScanner deduplicates by peripheral UUID — each device is reported once.
• For MAUI, register BLE with builder.Services.AddBluetoothLE() (namespace Shiny, no UseShiny needed in v4), then call builder.Services.AddShinyObdBluetoothLE() to register OBD BLE services.
• AddShinyObdBluetoothLE registers BleObdConfiguration and IObdDeviceScanner (BleObdDeviceScanner).
• A full MAUI sample app exists in samples/Sample.Maui/ with scan → select → dashboard flow.