atdd-mutate

name	atdd-mutate
description	Use to add a third validation layer to the ATDD workflow — after acceptance tests verify WHAT and unit tests verify HOW, mutation testing verifies the tests actually catch bugs. Triggers — "/mutate", "/kill-mutants", "run mutation testing", "mutate my code", "kill mutants", "check test quality", "find surviving mutants", "run stryker", "run mutmut", "run pitest", "are my tests catching bugs".

Mutation Testing

Add a third validation layer to the ATDD two-stream testing approach. Acceptance tests verify WHAT, unit tests verify HOW, mutation testing verifies that the tests actually catch bugs.

Core Concept

Mutation testing introduces deliberate bugs (mutants) into source code, then runs the test suite. If tests fail, the mutant is killed (good). If tests pass despite the bug, the mutant survives (test gap found).

Source code → introduce mutation → run tests
                                     ├── tests FAIL → mutant killed ✓
                                     └── tests PASS → mutant survived ✗

A project with 100% code coverage can still have a 60% mutation score — meaning 40% of introduced bugs go undetected by the test suite.

When to Use

Run mutation testing after both test streams are green:

1. Acceptance tests pass (WHAT is correct)
2. Unit tests pass (HOW is correct)
3. Mutation testing — verify tests actually detect regressions

This is Phase 6 in the team-based ATDD workflow, or a standalone quality check at any point during development.

Approach: Custom Mutation Tool (Preferred)

The preferred approach is to build a custom mutation tool for the project. This follows the methodology Uncle Bob developed for empire-2025 — a project-specific tool that walks the AST/source tree, applies one mutation at a time, runs targeted tests, and reports survivors.

Why Custom is Preferred

• Tight integration with the project's test runner and source structure
• Targeted execution — run only the tests affected by each mutation
• Language-agnostic — works for any language, including those without established mutation frameworks
• No external dependencies — the tool lives in the project
• AST-level precision — understands the language's constructs natively

Architecture (4 modules)

1. Mutations — rules table (e.g., + → -, true → false, >= → >) plus matching logic that walks the AST/form tree
2. Runner — source-to-test mapping, test execution, pass/fail capture
3. Core — orchestration: read source → discover sites → apply one at a time → run tests → restore original → report
4. Hashing/Selection — hash each function (AST-level) and its covering tests; call dae_mutmap.py to mutate only changed functions and to update the manifest after the run. See the Differential Mutation Testing section.

Core Mutation Categories

Category	Examples
Arithmetic	+ ↔ -, * ↔ /, ++ ↔ --
Comparison	> ↔ >=, < ↔ <=
Equality	== ↔ !=
Boolean	true ↔ false, && ↔ `
Conditional	negate conditions, swap if/if-not
Constant	0 ↔ 1, "" ↔ "mutant"
Return value	return true → return false
Void method	remove method call entirely

For the full architecture and detailed reference, see references/frameworks.md.

Alternative: Existing Frameworks

When speed of setup is more important than tight integration, use an established mutation framework as a secondary option:

Language	Framework
JavaScript/TypeScript	Stryker
Python	mutmut
Java/JVM	PIT (pitest)
C#	Stryker.NET
Rust	cargo-mutants
Go	go-mutesting
Ruby	mutant
Scala	Stryker4s

For install commands, configuration, and CLI reference, see references/frameworks.md.

Differential Mutation Testing

Mutation testing is slow — re-running it after a small change re-mutates every function. Differential mutation testing re-mutates only the functions whose code or covering tests changed, reusing cached results for the rest.

• Custom-tool path — the Hashing/Selection module hashes each function and its covering tests and calls dae_mutmap.py (select before the run, update after). Results live in a committed mutation-manifest.json beside the tool, so the saving reaches CI and every clone. A function is re-mutated when its code, its covering tests, or the mutation operator set changed. See ${CLAUDE_PLUGIN_ROOT}/references/differential-mutation.md.
• Framework path — Stryker (--incremental), PIT (withHistory), and mutmut have native incremental modes; enable the framework's incremental flag and commit its history file. Do not build a separate manifest for the framework path.

Workflow

Before Step 1, create one TodoWrite todo per step of this workflow (Steps 1–6), all at once — the full list up front, as a roadmap. Flip each todo to in_progress / completed as you go. See ${CLAUDE_PLUGIN_ROOT}/references/progress-indicator.md.

Step 1: Verify Prerequisites

Before running mutation testing, confirm:

• Both test streams are green (acceptance + unit)
• The project has meaningful unit tests (mutation testing runs against unit tests)
• No uncommitted changes (mutations modify source files temporarily)

Introversion pre-pass (recommended). If the engineer plugin is installed, run its dae_introvert.py <root> first — a cheap static scan that flags tests which can pass without asserting on SUT output (no assertion, or every assertion nested in a conditional/loop/try). These are guaranteed-weak tests; fixing them before mutation makes the run cheaper and the suite stronger, and the conditional-assertion class is caught even when no mutant happens to exercise the bypassed path. A configured manifest.introversion.backend (e.g. a deintroverter that backward-slices each assertion to the SUT) does the deeper data-flow classification; absent one, a built-in Python-AST fallback covers the cheap cases. A test flagged introverted and carrying a surviving mutant is a high-confidence vacuous test — prioritise it in Step 4.

Step 2: Set Up Mutation Tool

If no mutation tool is configured:

1. Detect the project language from source files and build config
2. Preferred: Build a custom mutation tool following the 4-module architecture (mutations, runner, core, hashing/selection). Use TDD to build the tool itself.
3. Alternative: Install an existing framework if rapid setup is needed
4. Configure to target source directories and exclude test/spec/generated files
5. Exclude .build/ (generated tests and IR) and the acceptance/ pipeline code from mutation
6. Enable differential mutation testing — the custom tool's hashing/selection module, or the framework's native incremental flag (see the Differential Mutation Testing section)

Important: Configure mutation testing to target source code only. Never mutate test files, spec files, or generated pipeline code.

Step 3: Run Mutations

On the custom-tool path, run dae_mutmap.py select first and mutate only the functions it returns — or all of them when it returns ALL. On the framework path, the incremental flag handles this. Then execute and collect results:

• Total mutants generated
• Mutants killed (tests caught the bug)
• Mutants survived (test gap)
• Mutation score (killed / total × 100)

Step 4: Analyze Survivors

For each surviving mutant:

1. Read the mutation — what was changed? (e.g., >= → >, removed function call)
2. Identify which behavior is unguarded
3. Determine whether this represents a real test gap or an equivalent mutant

Equivalent mutants are mutations that don't change observable behavior (e.g., changing x = x + 0). These can be ignored.

Step 5: Kill Surviving Mutants

For each real survivor:

1. Write a new unit test that specifically targets the unguarded behavior
2. Run the test to confirm it fails against the mutant
3. Run the full test suite to confirm it passes against the original code
4. Re-run mutation testing to confirm the kill

Step 6: Report

On the custom-tool path, run dae_mutmap.py update to refresh mutation-manifest.json. The report combines this run's fresh results with the manifest's cached entries for unchanged functions — mark the cached ones ("unchanged since last_mutated"). Present a summary:

Mutation Testing Report
═══════════════════════
Score:     87% → 95% (after killing survivors)
Killed:    190 / 200
Survived:  10 → 5 (5 equivalent mutants ignored)
New tests: 5 unit tests added

Remaining survivors (equivalent mutants):
- src/utils.js:42 — changed `x + 0` to `x + 1` (no-op mutation)
- ...

Mutation Score Targets

Score	Assessment
90%+	Strong test suite — minor gaps only
70-89%	Moderate — meaningful gaps to address
< 70%	Weak — significant untested behavior

A 100% mutation score is not always practical or necessary. Focus on killing mutants that represent real behavioral gaps, not chasing equivalent mutants.

Integration with ATDD Workflow

Mutation testing extends the existing two-stream approach:

1. Write specs (WHAT)           ← acceptance tests
2. Implement with TDD (HOW)     ← unit tests
3. Verify test quality (REAL?)  ← mutation testing

When using the atdd-team skill, mutation testing is part of Phase 6 (Verify & Harden), run by the architect — an agent whose agent_id is independent of the implementer and the refiner.

Anti-Patterns

"Let me mutate before tests are green"

No. Fix failing tests first. Mutation testing assumes a green baseline.

"100% mutation score or nothing"

Not practical. Equivalent mutants inflate the denominator. Aim for 90%+ and document the equivalent mutants that remain.

"Mutate everything including generated code"

Never mutate generated test files or the acceptance pipeline. Only mutate source code under development.

Additional Resources

Reference Files

For detailed framework setup and configuration:

• references/frameworks.md — Installation, configuration, and CLI reference for each supported mutation testing framework