l-bump-version-z

Étoiles0

Forks0

Mis à jour3 juin 2026 à 12:25

Bump the Z digit of this project's X.Y.Z version — a local checkpoint tag. Use when the user says 'bump version z', 'tag a checkpoint', 'l-bump-version-z'. Commits and creates a git tag ONLY (no GitHub release).

Installation

Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.

Exécuter dans Manus

Source

Takazudo

Takazudo/zudo-pd

Ouvrir le dépôt GitHub Voir les dépôts du créateur

Téléchargement

Exécuter dans Manus

SKILL.md

readonly

name	l-bump-version-z
description	Bump the Z digit of this project's X.Y.Z version — a local checkpoint tag. Use when the user says 'bump version z', 'tag a checkpoint', 'l-bump-version-z'. Commits and creates a git tag ONLY (no GitHub release).
argument-hint
allowed-tools	Bash(bash .claude/scripts/bump-version.sh ), Bash(git ), Bash(cat VERSION)

Confirm before running. This commits, pushes, and creates a git tag. Confirm with the user unless they clearly asked to bump.

l-bump-version-z — local checkpoint

Bumps Z in the project version X.Y.Z. Z = an ad-hoc local checkpoint, tagged whenever a point in the work is worth marking. See doc/docs/inbox/versioning.md.

Effect: 0.4.0 → 0.4.1 → commit chore(version): bump to 0.4.1 → annotated tag v0.4.1 → push. No GitHub release (git tag only, by design — that's what separates Z from X/Y bumps).

Steps

Confirm the working tree is clean (git status). If dirty, ask the user to /commits first.
Show the current version: cat VERSION.
Run the bump:
```
bash .claude/scripts/bump-version.sh z
```
Report the new version and tag (git tag --list 'v*' --sort=-v:refname | head -1).

Notes

Z tag only — intentionally no gh release. Use /l-bump-version-y for a JLCPCB order or /l-bump-version-x for a product release when you want a GitHub release.

Plus depuis ce dépôt

même dépôt

pd-schematic-review

Takazudo/zudo-pd

Datasheet-aware schematic review for this USB-PD power-supply board. Exports the KiCad schematic to a compact netlist, walks a power-supply checklist (VBUS sense paths, regulator EN/feedback dividers, dropout headroom, polarity, decoupling, abs-max), and writes a review report whose findings are LEADS to verify against the datasheet — never ground truth. Use when the user says 'review the schematic', 'schematic review', 'pd-schematic-review', 'check the design', or 'audit the circuit'. READ-ONLY against all *.kicad_sch / *.kicad_pcb.

2026-06-160

l-bump-version-x

Takazudo/zudo-pd

Bump the X digit of this project's X.Y.Z version — a real product release. Use when the user says 'bump version x', 'product release', 'l-bump-version-x'. Resets Z to 0, KEEPS Y (lifetime JLCPCB-order counter), commits, tags, and creates a GitHub release.

2026-06-030

l-bump-version-y

Takazudo/zudo-pd

Bump the Y digit of this project's X.Y.Z version — a new JLCPCB PCBA order. Use when the user says 'bump version y', 'new JLCPCB order', 'l-bump-version-y', or is placing the next PCB order. Resets Z to 0, commits, tags, and creates a GitHub release.

2026-06-030

name	l-bump-version-z
description	Bump the Z digit of this project's X.Y.Z version — a local checkpoint tag. Use when the user says 'bump version z', 'tag a checkpoint', 'l-bump-version-z'. Commits and creates a git tag ONLY (no GitHub release).
argument-hint
allowed-tools	Bash(bash .claude/scripts/bump-version.sh ), Bash(git ), Bash(cat VERSION)

Confirm before running. This commits, pushes, and creates a git tag. Confirm with the user unless they clearly asked to bump.

l-bump-version-z — local checkpoint

Bumps Z in the project version X.Y.Z. Z = an ad-hoc local checkpoint, tagged whenever a point in the work is worth marking. See doc/docs/inbox/versioning.md.

Steps

Confirm the working tree is clean (git status). If dirty, ask the user to /commits first.
Show the current version: cat VERSION.
Run the bump:
```
bash .claude/scripts/bump-version.sh z
```
Report the new version and tag (git tag --list 'v*' --sort=-v:refname | head -1).

Notes

Z tag only — intentionally no gh release. Use /l-bump-version-y for a JLCPCB order or /l-bump-version-x for a product release when you want a GitHub release.