Thermal engineering for infrastructure: heat transfer (conduction, convection, radiation), cooling load analysis for data centers, heat exchanger sizing via LMTD and e-NTU, PUE/TUE/WUE efficiency metrics, and airflow management patterns. Activates for thermal analysis, data center cooling design, heat exchanger sizing, efficiency calculations, and airflow management.
Installer avec Codex ou Claude Copiez ce prompt, collez-le dans Codex, Claude ou un autre assistant, puis laissez-le vérifier la page du skill et l'installer pour vous.
Une commande directe contourne le prompt de vérification. Examinez la source avant de l'exécuter.
Thermal engineering for infrastructure: heat transfer (conduction, convection, radiation), cooling load analysis for data centers, heat exchanger sizing via LMTD and e-NTU, PUE/TUE/WUE efficiency metrics, and airflow management patterns. Activates for thermal analysis, data center cooling design, heat exchanger sizing, efficiency calculations, and airflow management.
user-invocable
true
allowed-tools
Read Grep Glob Bash
metadata
{"extensions":{"gsd-skill-creator":{"version":1,"createdAt":"2026-02-26","triggers":{"intents":["heat transfer","thermal","conduction","convection","radiation","cooling load","heat exchanger","LMTD","NTU","PUE","TUE","WUE","airflow","hot aisle","cold aisle","data center cooling","BTU"],"contexts":["data center thermal analysis","infrastructure cooling design","thermal system optimization"]}}}}
applies_to
["skills/physical-infrastructure/**","*.calc"]
Thermal Engineering Skill
At a Glance
Calculate heat transfer rates, size heat exchangers, and analyze data center thermal performance from component-level junction temperatures to facility-wide efficiency metrics.
Activation: InfrastructureRequest type='thermal', any heat exchanger sizing request, PUE/WUE calculation, airflow management design, or cooling load analysis.
Integration: Works in tandem with pie-fluid-systems: the fluid skill sizes cooling loop pipes and pumps; this skill quantifies the heat and determines exchanger performance.
ENGINEERING DISCLAIMER: All calculations must be verified by a licensed Professional Engineer before use in construction or installation. HVAC and mechanical codes (ASHRAE 90.1, IMC) impose requirements not captured here. User assumes all responsibility for verification.
Quick routing: Heat transfer modes -- see Heat Transfer Fundamentals. Resistance networks -- see Thermal Resistance Networks. Data center loads -- see Data Center Cooling Load. Exchanger sizing -- see Heat Exchanger Sizing. PUE/WUE metrics -- see Efficiency Metrics. Airflow layout -- see Airflow Management.
Heat Transfer Fundamentals
Conduction -- Fourier's Law
Heat flow through a solid material by molecular vibration:
q = -k x A x (dT/dx)
Variable
Definition
Units
q
Heat flow rate
W
k
Thermal conductivity
W/(m K)
A
Cross-sectional area perpendicular to heat flow
m^2
dT/dx
Temperature gradient
K/m
The negative sign indicates heat flows from hot to cold (opposite to the temperature gradient).
Thermal resistance (conduction): R_cond = L / (k x A), analogous to electrical resistance R = rho L / A.
Thermal conductivity reference values:
Material
k (W/(m K))
Application
Copper
385
Heat sinks, cold plates
Aluminum
205
Enclosures, fins, cold plates
Carbon steel
50
Structural, pressure piping
Stainless steel 304
16
Corrosion-resistant piping
Concrete
1.4
Building structure
Gypsum board
0.16
Wall construction
Mineral wool
0.04
Pipe insulation
Polyurethane foam
0.025
Refrigeration insulation
Thermal paste (TIM)
1-8
CPU/GPU mounting
Convection -- Newton's Law of Cooling
Heat transfer between a surface and a moving fluid:
q = h x A x (T_surface - T_fluid)
Variable
Definition
Units
q
Heat flow rate
W
h
Convective heat transfer coefficient
W/(m^2 K)
A
Surface area exposed to fluid
m^2
Thermal resistance (convection): R_conv = 1 / (h x A)
Convective coefficient reference values:
Flow Type
Medium
h (W/(m^2 K))
Natural convection
Air
5-25
Forced convection
Air
25-250
Forced convection
Water (low velocity)
500-2,000
Forced convection
Water (high velocity)
2,000-10,000
Boiling
Water
3,000-60,000
Condensing
Steam
5,000-100,000
For convection correlations (Nusselt number, Reynolds, Prandtl relationships) -- @references/heat-transfer.md
Radiation -- Stefan-Boltzmann Law
Heat transfer by electromagnetic emission between surfaces:
CRITICAL: Temperatures MUST be in Kelvin for radiation calculations. K = C + 273.15.
Emissivity reference values:
Surface
epsilon
Notes
Blackbody (ideal)
1.0
Theoretical maximum
Painted steel
0.9
Most painted surfaces
Oxidized copper
0.7
Aged copper surfaces
Glass
0.9
Window and enclosure glass
Polished aluminum
0.04
Reflective radiation shield
Anodized aluminum
0.8
Common enclosure finish
When radiation matters: High temperatures (>200C), large temperature differentials, or vacuum/low-pressure environments. Usually negligible for data center operating temperatures (15-55C); important for outdoor equipment and industrial processes.
Thermal Resistance Networks
The thermal-electrical analogy maps heat transfer directly onto circuit analysis:
Thermal Domain
Electrical Domain
Heat flow q (W)
Current I (A)
Temperature difference DeltaT (K)
Voltage V (V)
Thermal resistance R (K/W)
Electrical resistance R (ohm)
Series Network (Heat Path Stack)
When heat flows through sequential layers, resistances add:
R_total = R_die_spreading + R_TIM + R_cold_plate_wall + R_cold_plate_convection
R_die_spreading = t_die / (k_silicon x A_die)
R_TIM = t_TIM / (k_paste x A_contact)
R_cold_plate_wall = t_wall / (k_copper x A_plate)
R_cold_plate_conv = 1 / (h_coolant x A_internal)
Temperature rise check: DeltaT_junction = q x R_total. Verify T_junction < TjMax (typically 95-105C for modern CPUs/GPUs).
Parallel Network (Multiple Heat Paths)
When heat has multiple simultaneous paths, resistances combine as parallels:
1/R_total = 1/R1 + 1/R2 + 1/R3
Use when heat splits between paths: fins parallel to base, combined air cooling + liquid cooling, multiple heat sinks on a shared substrate. The path with lowest resistance carries the most heat.
Contact and Interface Resistance
Real surfaces have microscopic asperities -- actual contact area is only 1-2% of nominal area.
R_contact = 1 / (h_c x A)
Thermal interface material (TIM) specific resistance:
Heat flow against a temperature gradient follows the same mathematical structure as gradient descent in machine learning:
Heat: q = -k nabla(T) (heat flows opposite to temperature gradient)
ML: theta_n+1 = theta_n - alpha nabla(L) (parameters move opposite to loss gradient)
Both describe movement opposing the direction of increasing potential. The temperature field T(x,y,z) in a data center is a scalar field whose gradient points from cold to hot. Heat flows against it. The student who has trained neural networks already understands the physics of heat conduction.
For thermal network examples and contact resistance data -- @references/heat-transfer.md
Data Center Cooling Load
Load Components
IT equipment load (dominant term, typically 60-80% of total):
Q_IT = sum(server_nameplate_TDP) x diversity_factor
= rack_count x avg_density_kW x utilization
Diversity factor: 0.7-0.9 (servers rarely sustain nameplate power continuously). Maximum demand method (NEC 220.87 adapted): use measured 15-minute peak power x 1.25.
Lighting: 10-20 W/m^2 for LED (was 50 W/m^2 for fluorescent). All lighting converts to heat -- add to cooling load.
UPS losses: Heat generated by power conversion inefficiency:
UPS Type
Loss at 50% Load
Loss at 100% Load
Online double-conversion (VRLA)
4-6%
2-3%
Online double-conversion (Li-ion)
1.5-2%
1-1.5%
Line-interactive
2-4%
1-2%
Fan and pump power: CRAC/CRAH fan power typically 5-15% of served IT load; pump power <3% of IT load. Add to heat balance as these also convert to heat within the space.
Envelope loads: Usually <5% for well-insulated interior data halls. Include solar gain if windows or poorly insulated walls face direct sun. Q_envelope = U x A x CLTD (cooling load temperature difference; typically 5-15C for insulated walls).
F = LMTD correction factor: F = 1.0 for pure counterflow (ideal). F = 0.7-0.95 for shell-and-tube and crossflow arrangements. If F < 0.75, consider adding shell passes or switching to counterflow.
Required area: A = Q / (U x F x LMTD)
Typical overall heat transfer coefficient U:
Application
U (W/(m^2 K))
Notes
Water-to-water plate HX
3,000-8,000
Compact, high efficiency
CDU (server-side)
1,000-3,000
Data center cooling
Water-to-air coil
30-300
Depends on air velocity
Shell-and-tube (water)
800-2,500
Industrial standard
Finned tube (air-cooled)
20-60
Dry cooler, condenser
Epsilon-NTU Method
Preferred when only inlet temperatures and desired capacity are known (sizing new equipment).
Design process: Choose target epsilon (typically 0.7-0.85), solve for NTU, then A = NTU x C_min / U.
When to use each method:
LMTD: rating existing equipment or when both inlet AND outlet temperatures are specified
Epsilon-NTU: sizing new equipment when only inlet temperatures and desired capacity are known
For LMTD correction factor charts and epsilon-NTU tables for all flow arrangements -- @references/heat-exchangers.md
Efficiency Metrics
PUE -- Power Usage Effectiveness
PUE = Total Facility Power / IT Equipment Power
Total includes: IT, UPS, cooling (chillers, pumps, fans, towers), lighting, power conditioning, security. Excludes non-data-center loads on the same meter.
Measurement: Annual average (preferred for reporting), not instantaneous. Use 15-minute interval samples for trending.
PUE
Overhead
Typical Configuration
1.03
3%
Hyperscale, outdoor/direct air
1.1
10%
Modern enterprise, water-side economizer
1.2
20%
Typical new build, air-side economizer
1.5
50%
Older facilities, legacy cooling
2.0
100%
Very old/inefficient facilities
TUE -- Total Usage Effectiveness
TUE = IT Equipment Energy / (Total Energy - Energy Reused Externally)
Accounts for heat recovery: district heating, absorption chillers, aquifer thermal storage.
TUE = PUE x (1 - reuse_fraction)
If heat recovery reuses 25% of total energy and PUE = 1.3: TUE = 1.3 x 0.75 = 0.975. TUE < 1.0 is achievable when heat recovery is substantial. TUE <= PUE always; equality holds when no heat is reused.
WUE -- Water Usage Effectiveness
WUE = Annual Site Water Usage (L) / Annual IT Equipment Energy (kWh)
Sources of water use: cooling tower evaporation (~90%), humidifiers, chiller heat rejection.
WUE (L/kWh)
Rating
Notes
< 1.0
World-class
Air-side economizer or dry cooling
1.0-2.0
Good
Moderate evaporative cooling
2.0-3.0
Average
Standard cooling tower operation
> 3.0
Investigate
Excessive water consumption
Trade-off: air-side economizer uses zero water; evaporative cooling uses more water but delivers lower PUE.
CUE -- Carbon Usage Effectiveness
CUE = Annual Total CO2 Emissions (kg) / Annual IT Energy (kWh)
CUE = PUE x local_grid_carbon_intensity (kg CO2/kWh)
Region
Grid Carbon Intensity (kg CO2/kWh)
Norway (hydro)
0.024
France (nuclear)
0.085
EU average
0.28
US average
0.39
Coal-heavy grids
0.82
Reduce CUE by: renewable energy procurement (PPAs, RECs), carbon-aware workload scheduling, on-site generation, heat recovery (reduces total energy via TUE).
For PUE measurement methodology (Green Grid Annex A), TUE derivation, and WUE water budget -- @references/dc-efficiency-metrics.md
Airflow Management
Hot/Cold Aisle Layout
Servers face into the cold aisle (front intakes aligned), exhaust into the hot aisle. This is the foundational airflow pattern for all air-cooled data centers.
Cold aisle supply: 15-27C (ASHRAE A-class), delivered from raised floor tiles or overhead diffusers
Hot aisle return: 35-45C, returned to CRAC/CRAH inlets -- never allow recirculation back to cold aisle
Row spacing: cold aisles 4 ft (1.2 m) minimum, hot aisles 3 ft (0.9 m) minimum
Physical barriers enclose hot aisle; ducts to CRAC return
0.15-0.25 PUE reduction
New build; highest efficiency
Full containment
Both CAC + HAC
0.2-0.3 PUE reduction
New high-density builds
CAC captures supply air; HAC captures exhaust air. HAC is generally preferred for new builds because it prevents hot air mixing with the room and allows higher CRAC supply temperatures.
Perforated tiles: 150-500 CFM per tile at 0.05 inches water gauge plenum pressure
Tile placement rules: cold aisle only; no tiles in hot aisles or under power/network equipment
Blanking panels: fill ALL empty rack U-spaces to prevent hot air recirculation -- highest ROI single action for thermal management
Cable management: route cables to avoid blocking plenum airflow; use overhead trays where possible
Economizer Modes
Mode
Mechanism
Water Use
Best Climate
Air-side (direct)
Outdoor air when T_outdoor < T_supply setpoint
Zero
Cool/dry climates
Water-side (indirect)
Cooling tower free cooling when T_wetbulb allows
Moderate
Temperate climates
Evaporative (adiabatic)
Pre-cool supply air via evaporation
High
Hot/dry climates
Air-side economizer requires air filtration and humidity control. Water-side economizer avoids contamination risk by keeping outdoor air outside. Evaporative saves compressor energy but increases WUE.
