explain-code

name	explain-code
description	Use this skill when the user wants to add a new GNATprove explain code for a SPARK violation. Covers validation, research, drafting the markdown explanation, user confirmation, and all four code changes needed to wire the new code up.
license	Apache-2.0
metadata	{"version":"0.1.0"}

Explain Code Skill

This skill adds a new explain code (E00NN) for a Violation_Kind in the spark2014 repository. Explain codes appear in GNATprove error messages as [E00NN] and are accompanied by a continuation message directing the user to run gnatprove --explain=E00NN for a detailed explanation.

Invocation

Two modes:

• New code: the user provides a Violation_Kind name (e.g., Vio_Controlled_Types). Follow Phase 1 → Phase 2.
• Fix mode: the user provides an existing code number and says to fix it (e.g., "fix E0024"). Follow Phase 0 → Phase 1 (Steps 4–6a only) → Phase 2 (Change 1 only).

---

Phase 0: Fix Mode — Diagnose and Research

Only for fix mode. Skip entirely for new codes.

Step F1 — Read and validate the existing file

Read share/spark/explain_codes/E00NN.md. Run /validate-explain-codes on it to confirm which examples fail and record the gnatprove output for each FAIL. If everything passes, tell the user and stop — nothing to fix.

Step F2 — Research a correct workaround

Using the failing good example(s) and the gnatprove error output as a starting point, research the correct fix:

• Identify the SPARK RM rule the failing example violates (the error message usually cites it).
• Fetch the relevant SPARK RM section and User's Guide discussion (same URLs as Step 5 of Phase 1).
• Draft a replacement for the failing section of the file only. Keep the bad example and the explanation prose unchanged unless they are also wrong.

Then proceed to Step 6 (draft the replacement content) and Step 6a (validate it). If validation passes, go to Phase 2 Fix — Change 1 only.

Phase 2 Fix — Update the markdown file

Write the corrected content to share/spark/explain_codes/E00NN.md. No changes to vc_kinds.ads, vc_kinds.adb, or README.md are needed.

After writing, show the user the git diff to review before committing.

---

Phase 1: Validate and Research

Do all of the following before presenting anything to the user.

Step 1 — Validate the choice

Grep src/common/vc_kinds.adb for the Explain_Code case expression (search for function Explain_Code). Confirm that the given Violation_Kind falls through to the when others => EC_None arm and is not already mapped to a specific code. If it already has a code, tell the user and stop.

Also confirm that no .md file exists in share/spark/explain_codes/ whose content visibly covers this violation. If one does, tell the user and stop.

Step 2 — Gather the violation's metadata

In src/common/vc_kinds.adb, find:

• The violation message: the string returned by Violation_Message for this kind (in the large case expression that maps Violation_Kind to strings).
• The SRM reference: the string returned by SRM_Reference for this kind (in the second large case expression). Note the SPARK RM section number (e.g., "SPARK RM 7.6(1)").

Step 3 — Determine the next code number

Look at the tail of the Explain_Code_Kind enumeration in src/common/vc_kinds.ads and its representation clause. The next number is one more than the current maximum.

Step 4 — Study existing explain codes for style

Read the two or three most recently added .md files in share/spark/explain_codes/ (sort by modification time or by highest number). Note the structure: illegal code example with -- error comments, "This error is issued on..." opening sentence, explanation of the rule and its rationale, fix or workaround with a code example, optional link to the SPARK RM.

Step 5 — Research the violation

Using the SRM section number from Step 2:

• Fetch the relevant section of the SPARK Reference Manual. The base URL is: https://docs.adacore.com/live/wave/spark2014/html/spark2014_rm/ The HTML filename corresponds to the Ada RM chapter (e.g., section 7.x → packages.html, section 6.x → subprograms.html, section 3.x → declarations-and-types.html, section 5.x → statements.html). Append #<anchor> using the section title in lowercase with hyphens. The user-provided URL for the violation's topic (if any) takes precedence.

• Search the SPARK User's Guide for discussion of this violation: https://docs.adacore.com/live/wave/spark2014/html/spark2014_ug/en/

Record what you found in each source, noting any rationale, examples, or suggested workarounds.

Step 6 — Draft the markdown file

Draft the content for share/spark/explain_codes/E00NN.md following the style from Step 4. The file should contain:

1. Illegal code example — the minimal Ada snippet that triggers this violation, with -- error on the offending line(s).

2. "This error is issued on..." — what construct triggers it and why the rule exists. Explain the rationale, not just the rule.

3. Fix or workaround — a concrete Ada example showing the corrected code. If no clean fix exists, acknowledge that and describe the best available workaround (e.g., encapsulating in SPARK_Mode => Off).

   If you offer more than one fix, each fix must have its own complete, self-contained Ada code example — never prose-only. Step 6a then validates every example. If a candidate fix is too unwieldy to give as a small example, that is a signal to drop it rather than leave it as a bare suggestion.

4. Optional SPARK RM link — if the RM section is informative, link to it using a Markdown reference link at the bottom of the file, following the pattern in share/spark/explain_codes/E0001.md.

Do not add a "See also E00NN" block cross-referencing sibling explain codes. Existing explain codes do not use them, and they are easy to make inconsistent across a batch (some codes listed, some not). The README index already lets readers find related codes.

Step 6a — Validate examples

Before presenting the draft to the user, run the /validate-explain-codes skill against the draft markdown content (bad example and all good examples). See that skill for the full procedure; the short version:

1. Write the bad example to ec-test/, run gnatprove -P ec-test/default.gpr --mode=check -j0 --output=oneline, confirm at least one message lands on a -- error line.
2. For each good example (or group of files that belong together), clean ec-test/src/ (rm -rf ec-test/src && mkdir ec-test/src), write the snippet(s) to ec-test/src/, and confirm gnatprove produces zero messages.

Record the result (PASS/FAIL per snippet) to include in Step 7.

Step 7 — Review and confirm (or proceed automatically)

Present to the user:

1. The proposed E00NN.md content in full.
2. The validation results from Step 6a (PASS/FAIL per snippet).
3. A brief "Sources used" note: which SPARK RM section and UG section you consulted, and what each contributed.
4. Any open questions — e.g., uncertainty about the right workaround, whether the illegal code example is the most representative one, or any validation FAILs that need resolution.

If you have open questions or any validation FAILs, stop here and wait for the user to answer them before proceeding.

If you are confident in the draft (no unresolved questions, all validation checks PASS), proceed directly to Phase 2 without waiting for confirmation.

---

Phase 2: Implement

Proceed only after user confirmation. Make all four changes:

Change 1 — Create the markdown file

Write the confirmed content to share/spark/explain_codes/E00NN.md.

Change 2 — Add the enum value (src/common/vc_kinds.ads)

In the Explain_Code_Kind type declaration, add EC_Xxx as the new last value (before the closing )) and add EC_Xxx => NN to the representation clause, aligned with the existing entries.

The naming convention for EC_Xxx is to derive it from the Violation_Kind name with Vio_ replaced by EC_: e.g., Vio_Controlled_Types → EC_Controlled_Types.

Change 3 — Wire the case arm (src/common/vc_kinds.adb)

In the Explain_Code (Kind : Violation_Kind) case expression, add:

when Vio_Xxx => EC_Xxx,

Insert it before the when others => EC_None arm, aligned with existing entries.

Change 4 — Update the README index

Append to share/spark/explain_codes/README.md:

- E00NN: `<short description matching the violation message>`

The short description should be a condensed version of the violation message, suitable as a one-line index entry.

---

Completion

After all four changes, show the user the git diff so they can review the full changeset before committing.