homelab-network-readiness

name	homelab-network-readiness
description	Readiness checklist for homelab VLAN segmentation, local DNS filtering, and WireGuard-style remote access before changing router, firewall, DHCP, or VPN configuration.
origin	community

Homelab Network Readiness

Use this skill before changing a home or small-lab network that mixes VLANs, Pi-hole or another local DNS resolver, firewall rules, and remote VPN access.

This is a planning and review skill. Do not turn it into copy-paste router, firewall, or VPN configuration unless the target platform, current topology, rollback path, console access, and maintenance window are all known.

When to Use

• Preparing to split a flat network into trusted, IoT, guest, server, or management VLANs.
• Moving DHCP clients to Pi-hole, AdGuard Home, Unbound, or another local DNS resolver.
• Adding WireGuard, Tailscale, ZeroTier, OpenVPN, or router-native VPN access.
• Reviewing whether a homelab change can lock the operator out of the gateway, switch, access point, DNS server, or VPN server.
• Turning an informal home-network idea into a staged migration plan with validation evidence.

Safety Rules

• Keep the first answer read-only: inventory, risks, staged plan, validation, and rollback.
• Do not expose gateway admin panels, DNS resolvers, SSH, NAS consoles, or VPN management UIs directly to the public internet.
• Do not provide firewall, NAT, VLAN, DHCP, or VPN commands without a confirmed platform and a rollback procedure.
• Require out-of-band or same-room console access before changing management VLANs, trunk ports, firewall default policies, or DHCP/DNS settings.
• Keep a working path back to the internet before pointing the whole network at a new DNS resolver or VPN route.
• Treat IoT, guest, camera, and lab-server networks as different trust zones until the operator explicitly chooses otherwise.

Required Inventory

Collect this before giving implementation steps:

Area	Questions
Internet edge	What is the modem or ONT? Is the ISP router bridged or still routing?
Gateway	What routes, firewalls, handles DHCP, and terminates VPNs?
Switching	Which switch ports are uplinks, access ports, trunks, or unmanaged?
Wi-Fi	Which SSIDs map to which networks, and are APs wired or mesh?
Addressing	What subnets exist today, and which ranges conflict with VPN sites?
DNS/DHCP	Which service currently hands out leases and resolver addresses?
Management	How will the operator reach the gateway, switch, and AP after changes?
Recovery	What can be reverted locally if DNS, DHCP, VLANs, or VPN routes break?

VLAN And Trust-Zone Plan

Start with intent rather than vendor syntax.

Zone	Typical contents	Default policy
Trusted	Laptops, phones, admin workstations	Can reach shared services and management only when needed
Servers	NAS, Home Assistant, lab hosts, DNS resolver	Accepts narrow inbound flows from trusted clients
IoT	TVs, smart plugs, cameras, speakers	Internet access plus explicit exceptions only
Guest	Visitor devices	Internet-only, no LAN reachability
Management	Gateway, switches, APs, controllers	Reachable only from trusted admin devices
VPN	Remote clients	Same or narrower access than trusted clients

Before recommending VLAN IDs or subnets, confirm:

1. The gateway supports inter-VLAN routing and firewall rules.
2. The switch supports the required tagged and untagged port behavior.
3. The APs can map SSIDs to VLANs.
4. The operator knows which port they are connected through during the change.
5. The management network remains reachable after trunk and SSID changes.

DNS Filtering Readiness

Pi-hole or another local resolver should be introduced as a dependency, not as a single point of failure.

1. Give the resolver a reserved address before using it in DHCP options.
2. Confirm it can resolve public DNS and local home.arpa names.
3. Keep the gateway or a second resolver available as a temporary fallback.
4. Test one client or one VLAN before changing every DHCP scope.
5. Document which networks may bypass filtering and why.
6. Check that blocking rules do not break captive portals, work VPNs, firmware updates, or medical/security devices.

Useful validation evidence:

Client gets expected DHCP lease
Client receives expected DNS resolver
Public DNS lookup succeeds
Local home.arpa lookup succeeds
Blocked test domain is blocked only where intended
Gateway and DNS admin interfaces are not reachable from guest or IoT networks

Remote Access Readiness

For WireGuard-style access, decide what the VPN is allowed to reach before generating keys or opening ports.

Mode	Use when	Risk notes
Split tunnel to one subnet	Remote admin for NAS or lab hosts	Keep route list narrow
Split tunnel to trusted services	Access selected apps by IP or DNS	Requires precise firewall rules
Full tunnel	Untrusted networks or travel	More bandwidth and DNS responsibility
Overlay VPN	Simpler remote access with identity controls	Still needs ACL review

Do not recommend port forwarding until the operator confirms:

• The VPN endpoint is patched and actively maintained.
• The forwarded port goes only to the VPN service, not an admin UI.
• Dynamic DNS, public IP behavior, and ISP CGNAT status are understood.
• Peer keys can be revoked without rebuilding the whole network.
• Logs or connection status can verify who connected and when.

Change Sequence

Prefer small, reversible changes:

1. Snapshot the current topology, IP plan, DHCP settings, DNS settings, and firewall rules.
2. Reserve infrastructure addresses for gateway, DNS, controller, APs, NAS, and VPN endpoint.
3. Create the new zone or VLAN without moving critical devices.
4. Move one test client and validate DHCP, DNS, routing, internet, and block behavior.
5. Add narrow firewall exceptions for required flows.
6. Move one low-risk device group.
7. Add VPN access with the narrowest route and firewall policy that satisfies the use case.
8. Document final state, known exceptions, and rollback commands or UI steps.

Review Checklist

• Each network has a reason to exist and a clear trust boundary.
• No management interface is reachable from guest, IoT, or the public internet.
• DNS failure does not take down the operator's ability to recover locally.
• DHCP scope changes were tested on one client before broad rollout.
• VPN clients receive only the routes and DNS settings they need.
• Firewall rules are default-deny between zones, with named exceptions.
• The operator can still reach gateway, switch, AP, DNS, and VPN admin surfaces.
• Rollback is documented in the same vocabulary as the chosen platform UI or CLI.

Anti-Patterns

• Segmenting networks before knowing which switch ports and SSIDs carry which VLANs.
• Moving the admin workstation off the only reachable management network.
• Pointing all DHCP scopes at a Pi-hole before testing fallback DNS.
• Publishing NAS, DNS, router, or hypervisor management directly to the internet.
• Treating VPN access as equivalent to full trusted-LAN access.
• Adding allow-all firewall rules temporarily and forgetting to remove them.
• Copying commands from another vendor or firmware version without checking the exact platform syntax.

See Also

• Skill: homelab-network-setup
• Skill: network-config-validation
• Skill: network-interface-health