vless-reality-aws-lightsail

name	vless-reality-aws-lightsail
description	Use when deploying VLESS+Reality+Vision on AWS Lightsail and bridging it to Surge (or similar TUN clients) with an Alpine LXC SOCKS5 bridge on the LAN plus a brew sing-box on the laptop for off-LAN use. Triggers on "set up vless reality on aws", "tokyo lightsail proxy", "surge doesn't support vless", "vless when away from home lan", "alpine lxc client for vless".

VLESS + Reality + Vision on AWS Lightsail with LAN+Local Bridges for Surge

Use this skill when the egress is a Lightsail VLESS+Reality+Vision server and the consumer is Surge (or any client that does not speak VLESS). The deployment has two co-existing client locations: an Alpine LXC on the home LAN that serves every device, and a sibling sing-box on the user's Mac that takes over when the Mac leaves the LAN. Surge sees both as plain SOCKS5 and switches via a fallback group.

Scope

• Target task class: one fresh Lightsail VLESS+Reality+Vision server with a Static IP, one LAN-side Alpine LXC sing-box bridge, one Mac-side brew sing-box, and a Surge MANAGED-CONFIG patch (proxy entries + fallback group + TUN bypass).
• Assumes: AWS CLI authenticated; Proxmox VE 8.x host reachable as root@<pve>; target Surge config managed as a file; the LAN has a WAN gateway that does NOT MITM the egress IP; the Mac runs Surge in TUN mode.
• Out of scope: WireGuard / Tailscale back-home (an alternative to the Mac local sing-box); server hardening; Hysteria2 / Trojan; multi-user Xray.

Inputs

Variable	Meaning
LIGHTSAIL_REGION	e.g. ap-northeast-1
INSTANCE_NAME	Lightsail instance name
PVE_HOST	Proxmox host, e.g. root@10.0.0.10
CT_ID / CT_IP / CT_GW	LXC id, static IP/CIDR, gateway (e.g. 205, 10.0.0.30/24, 10.0.0.8)
SURGE_HOST / SURGE_CONF_PATH	Host running the Surge config file server and the path to .conf
MAC_SINGBOX_CONF	/opt/homebrew/etc/sing-box/config.json (Apple Silicon) or /usr/local/etc/sing-box/config.json (Intel)

Files Provided by This Skill

scripts/
  lightsail-ssh-init.sh      — fetch one-shot SSH key+cert+known_hosts (cert TTL ~13 min)
  reality-probe.sh           — probe SNI candidates for TLS 1.3 + ALPN h2 + public CA
  lxc-alpine-bootstrap.sh    — idempotent Alpine LXC bring-up (lo, openrc, softlevel, networking)
  vless-share-link.py        — generate vless:// share URI for mobile/GUI clients
references/
  xray-server.json           — server config template with placeholders
  singbox-client.json        — sing-box ≥1.13 client config template

Workflow

[1] Lightsail: open ports, attach Static IP, get SSH        -> scripts/lightsail-ssh-init.sh
[2] Pick Reality dest with PUBLIC CA chain                  -> scripts/reality-probe.sh
[3] Server: install Xray, write config                      -> references/xray-server.json
[4] PVE: create LXC, bootstrap Alpine                       -> scripts/lxc-alpine-bootstrap.sh
[5] CT sing-box (LAN bridge, listen 0.0.0.0:10808)          -> references/singbox-client.json
[6] Mac sing-box (off-LAN bridge, listen 127.0.0.1:10808)   -> references/singbox-client.json
[7] Surge: tun-excluded-routes += SERVER_IP/32; fallback group
[8] Verify both bridges via curl --socks5-hostname ipinfo.io

Step 1 — Lightsail: Ports, Static IP, SSH

The Lightsail UI cannot add ICMP rules — only the CLI/API can. put-instance-public-ports is full-overwrite; prefer open-instance-public-ports for incremental adds.

# Open required ports incrementally
aws lightsail open-instance-public-ports --region "$LIGHTSAIL_REGION" --instance-name "$INSTANCE_NAME" \
  --port-info 'fromPort=443,toPort=443,protocol=tcp,cidrs=["0.0.0.0/0"],ipv6Cidrs=["::/0"]'
aws lightsail open-instance-public-ports --region "$LIGHTSAIL_REGION" --instance-name "$INSTANCE_NAME" \
  --port-info 'fromPort=8,toPort=-1,protocol=icmp,cidrs=["0.0.0.0/0"]'

# Attach a Static IP so SERVER_IP never drifts (free while attached to a running instance)
aws lightsail allocate-static-ip --region "$LIGHTSAIL_REGION" --static-ip-name "${INSTANCE_NAME}-static"
aws lightsail attach-static-ip   --region "$LIGHTSAIL_REGION" --static-ip-name "${INSTANCE_NAME}-static" \
  --instance-name "$INSTANCE_NAME"

# Reach SSH (cert valid ~13 min — re-run to refresh)
scripts/lightsail-ssh-init.sh "$INSTANCE_NAME" "$LIGHTSAIL_REGION" ./ssh

To re-roll a dynamic IP (only if Static IP not attached): stop-instance then start-instance. Attaching the Static IP changes the public IP to the allocated one — re-validate Reality and refresh all server: ... fields in client configs afterward.

Step 2 — Reality dest: The Single Biggest Footgun

Reality forwards unauthenticated TLS handshakes to the configured dest. If the dest serves a cert from an internal CA (e.g. Microsoft Update Secure Server CA, Apple iCloud internal), the Reality module flags it as target sent incorrect server hello or handshake incomplete and refuses to relay. The client sees x509: certificate signed by unknown authority and stalls forever.

A dest passes only when all three hold:

1. Protocol: TLSv1.3 negotiated
2. ALPN protocol: h2 negotiated
3. Issuer is a publicly-trusted CA (chains to DigiCert, ISRG, etc.) — NOT a vendor-internal CA

Probe from the server itself (egress matches production):

# Defaults to a known-good candidate list
ssh ec2-user@$IP 'bash -s' < scripts/reality-probe.sh
# Or: ./scripts/reality-probe.sh learn.microsoft.com download.microsoft.com

Known-good (2026): www.microsoft.com, learn.microsoft.com, support.microsoft.com, www.bing.com, www.yahoo.co.jp. Known-bad: sls.update.microsoft.com, fe2.update.microsoft.com, dl.delivery.mp.microsoft.com, www.icloud.com.

Step 3 — Server: Install Xray and Deploy Config

# On the server (as ec2-user via the SSH from Step 1):
sudo bash -c 'curl -fsSL https://github.com/XTLS/Xray-install/raw/main/install-release.sh | bash -s -- install'

# Generate identity bits
/usr/local/bin/xray x25519           # PrivateKey + Password (== publicKey)
/usr/local/bin/xray uuid             # client UUID
openssl rand -hex 8                  # 8-byte shortId

Copy references/xray-server.json to /usr/local/etc/xray/config.json and substitute <UUID>, <SNI>, <PRIVATEKEY>, <SHORTID> (and drop the _comment_template field). Including "" in shortIds lets clients connect with either the chosen shortId or an empty one — useful when distributing multiple variants.

sudo /usr/local/bin/xray run -test -config /usr/local/etc/xray/config.json
sudo systemctl restart xray && sudo ss -tlnp | grep ':443'

Debugging Reality auth failures

The default loglevel: warning hides Reality's REALITY: processed invalid connection messages. To diagnose a failing client, temporarily set info and tail journalctl:

sudo sed -i 's/"warning"/"info"/' /usr/local/etc/xray/config.json
sudo systemctl restart xray
sudo journalctl -u xray -f          # watch for REALITY: lines, then revert

The file logs at /var/log/xray/{access,error}.log stay empty for Reality fallback events — journalctl captures stdout/stderr from the systemd unit and is the authoritative source.

Step 4 — PVE: Create Alpine LXC

The Proxmox CDN can be very slow from CN/HK gateways. Pull the Alpine minirootfs from Aliyun and rename to .tar.gz (despite Proxmox naming convention using .tar.xz):

ssh "$PVE_HOST" '
cd /var/lib/vz/template/cache
curl -fsSL -o alpine-3.23-default_20260116_amd64.tar.gz \
  https://mirrors.aliyun.com/alpine/v3.23/releases/x86_64/alpine-minirootfs-3.23.0-x86_64.tar.gz
'

ssh "$PVE_HOST" "pct create $CT_ID local:vztmpl/alpine-3.23-default_20260116_amd64.tar.gz \
  --hostname vless-client --memory 256 --swap 256 --cores 1 \
  --rootfs local-lvm:2 --net0 name=eth0,bridge=vmbr0,ip=$CT_IP,gw=$CT_GW \
  --unprivileged 1 --onboot 1 --ostype alpine"

ssh "$PVE_HOST" "pct start $CT_ID"

# Bring up loopback, install openrc/ifupdown-ng, persist softlevel fix
scp scripts/lxc-alpine-bootstrap.sh "$PVE_HOST:/tmp/"
ssh "$PVE_HOST" "/tmp/lxc-alpine-bootstrap.sh $CT_ID $CT_IP $CT_GW"

The Alpine minirootfs has no lo, no openrc, no ifupdown-ng. Unprivileged LXC also misses /run/openrc/softlevel. The bootstrap script handles all four (see script docs).

Step 5 — CT: sing-box as VLESS Client (LAN Bridge)

Alpine's community repo has sing-box 1.12 but does not have xray. sing-box's Reality client is fully interoperable with an Xray server.

ssh "$PVE_HOST" "pct exec $CT_ID -- apk add --no-cache sing-box sing-box-openrc curl"

Copy references/singbox-client.json into /etc/sing-box/config.json, substitute the placeholders, and set inbounds[0].listen to 0.0.0.0 so other LAN hosts can reach it as $CT_IP:10808.

ssh "$PVE_HOST" "pct exec $CT_ID -- sh -c '
sing-box check -c /etc/sing-box/config.json
rc-update add sing-box default
rc-service sing-box start
ss -tlnp | grep :10808
'"

sing-box 1.13 syntax migration

1.13 removed the legacy inbound sniff / sniff_override_destination fields (migration doc). The references/singbox-client.json template is already 1.13-form (no inline sniff; { "action": "sniff" } as a route rule). It also works on 1.12 — write once, deploy on both Alpine 1.12 and brew 1.13.

Routing pitfall: do NOT use geoip:cn → direct if local DNS returns fake IPs

When the LAN runs Surge in TUN mode (or any setup that remaps DNS to a private range like 198.18.0.0/16), an Xray/sing-box rule of ip → direct for geoip:private catches every resolved address and sends everything direct. Symptom: client log shows app/dispatcher: taking detour [direct] for every domain and remote endpoints in 198.18.x.x. Fix: use domainStrategy: "AsIs" (Xray) or domain-only rules in sing-box so routing decides on the original domain before any DNS happens.

Step 6 — Mac sing-box (Off-LAN Bridge)

The CT bridge is unreachable once the Mac leaves the home LAN. Mirror the same client on the Mac.

brew install sing-box
mkdir -p /opt/homebrew/etc/sing-box /opt/homebrew/var/lib/sing-box
# Copy references/singbox-client.json to $MAC_SINGBOX_CONF, substitute placeholders.
# Keep inbounds[0].listen = "127.0.0.1" (Mac is a single host, no LAN reach needed).
/opt/homebrew/opt/sing-box/bin/sing-box check -c "$MAC_SINGBOX_CONF"
brew services start sing-box
lsof -nP -iTCP -sTCP:LISTEN | grep ':10808'

The Mac sing-box reuses the same UUID, public_key, and short_id as the CT — Xray accepts both clients on one credential. Issue a separate UUID per device only if you need per-device revocation.

Step 7 — Surge: TUN Bypass, Two Proxies, Fallback Group

Surge does not speak VLESS. Both bridges expose the tunnel as plain SOCKS5; Surge consumes whichever is reachable.

Critical: bypass Surge TUN for the upstream SERVER_IP

When the Mac runs Surge in TUN mode, every outbound socket — including sing-box's TCP to SERVER_IP:443 — is captured by utun. If a Surge MITM rule matches, the Reality handshake breaks with x509: certificate signed by unknown authority (symptom identical to a Step 2 server-side problem, but the cause is local).

Fix: exclude SERVER_IP/32 from TUN entirely.

[General]
tun-excluded-routes = <existing CIDRs>, <SERVER_IP>/32

tun-excluded-routes accepts a comma-separated CIDR list. A static IP (Step 1) makes the entry stable; without it, every IP rotation needs a TUN-list edit.

Add both bridges and a fallback group

Always back up the live config first — Surge subscribers pull whatever is at the URL on next interval:

ssh "$SURGE_HOST" "cp $SURGE_CONF_PATH ${SURGE_CONF_PATH}.bak.\$(date +%Y%m%d-%H%M%S)"

[Proxy]
# Rename the prior single AWS_JP to AWS_JP_LAN; add the local sibling.
# [Proxy] and [Proxy Group] share a namespace, so the new group named AWS_JP
# (below) replaces the old proxy named AWS_JP. Existing group references
# (Proxy, JP, AI, Reality, etc.) automatically resolve to the fallback group.
AWS_JP_LAN   = socks5, <CT_IP>, 10808, udp-relay=true
AWS_JP_Local = socks5, 127.0.0.1, 10808, udp-relay=true

[Proxy Group]
# Prefer LAN (faster, offloads Mac); drop to Local when LAN url-test fails.
AWS_JP = fallback, AWS_JP_LAN, AWS_JP_Local, url=http://cp.cloudflare.com/generate_204, interval=60, timeout=3

Notes:

• udp-relay=true is required for QUIC / HTTP/3 over SOCKS5.
• Surge MITM is irrelevant for SOCKS5 outbounds (Surge MITMs only direct TLS) — that's why Step 7's tun-excluded-routes matters for the upstream connection only.
• Do not chain AWS_JP* behind underlying-proxy= when the target is on LAN or localhost.
• Surge subscribers with #!MANAGED-CONFIG ... interval=... refresh on schedule; trigger now with ⌘R.

Step 8 — Verify

Test both bridges independently so a regression points at the right config.

# CT bridge (LAN side):
pct exec $CT_ID -- curl -s --max-time 10 --socks5-hostname 127.0.0.1:10808 https://ipinfo.io/json
curl -s --max-time 10 --socks5-hostname $CT_IP:10808 https://ipinfo.io/json     # from any LAN host

# Mac bridge (local side; requires tun-excluded-routes applied + Surge reloaded):
curl -s --max-time 10 --socks5-hostname 127.0.0.1:10808 https://ipinfo.io/json

All three must return "ip": "<SERVER_IP>" and the correct country. If ipinfo.io returns the LAN/Mac egress IP, traffic went DIRECT — recheck Step 5 routing pitfall (CT) or Step 7 tun-excluded-routes (Mac).

Always use --socks5-hostname (sends domain), not --socks5 (resolves client-side first).

Verifying the Surge fallback group

• On LAN: Surge should select AWS_JP_LAN. Confirm in the Surge dashboard's policy view.
• Disconnect from LAN (or block $CT_IP temporarily): within interval seconds the AWS_JP group flips to AWS_JP_Local. Surge resumes AWS_JP_LAN once it's reachable.

Generate vless:// Share Link

For mobile / GUI clients (v2rayN, Stash, Streisand, NekoBox):

scripts/vless-share-link.py \
  --server "$SERVER_IP" --uuid "$UUID" --pbk "$PBK" --sid "$SHORTID" \
  --sni www.microsoft.com --name "vless_jp_reality"

Rules

• Never use Microsoft Update / Apple internal-CA hostnames as Reality dest — see Step 2.
• Probe Reality dest from the server, never from the client.
• Edit Surge MANAGED-CONFIG files via a local copy + diff + timestamped backup before pushing back.
• put-instance-public-ports is destructive (replaces ALL rules); use open-instance-public-ports for incremental adds.
• Attach a Static IP before distributing client configs — without one, every stop/start invalidates every client.
• LXC pct create defaults leave Alpine minirootfs without lo, openrc, or ifupdown-ng — the bootstrap script handles all of it.
• sing-box and Xray on the same Reality{privateKey ↔ publicKey, shortId} pair are interoperable; pick whichever client is in the target repo.
• For sing-box ≥1.13, drop legacy sniff inbound fields and use { "action": "sniff" } route rule (the template already does).
• On a Mac running Surge in TUN mode, always add SERVER_IP/32 to tun-excluded-routes before starting the local sing-box.

Common Pitfalls

Symptom	Cause	Fix
Client log: x509: certificate signed by unknown authority after TCP connect succeeds	Reality dest uses internal CA (Microsoft Update, Apple iCloud) — server falls back to forwarding the real cert which the client cannot validate	Probe with scripts/reality-probe.sh; pick a dest with publicly-trusted chain
Server log empty despite client errors	loglevel: warning hides Reality fallback events	Set info/debug temporarily; events go to journalctl, NOT /var/log/xray/error.log
pct create fails: xz: File format not recognized	Alpine minirootfs is gzip, file extension .tar.xz is wrong	Rename to .tar.gz
rc-service warns "you will get unpredictable results"	Missing /run/openrc/softlevel in LXC	scripts/lxc-alpine-bootstrap.sh writes a persistent /etc/local.d/00-bootstrap.start
SOCKS5 to 127.0.0.1:10808 from inside CT times out, listener visible in ss	lo not brought up in container	Same bootstrap script — ip link set lo up && ip addr add 127.0.0.1/8 dev lo
Routing always direct, log shows [direct] for every domain	Local DNS returns fake IPs (e.g. Surge TUN 198.18.x.x) caught by geoip:private/cn → direct	Use domainStrategy: "AsIs"; remove IP-only direct rules
Lightsail UI has no ICMP option in firewall	Lightsail UI lists only TCP/UDP	Use aws lightsail open-instance-public-ports --port-info protocol=icmp,...
openssl s_client cert verifies but Reality still rejects	Cert issuer is publicly trusted but ALPN h2 not negotiated	Reject candidate; require both public CA AND ALPN h2
sing-box check on Mac: legacy inbound fields … removed in sing-box 1.13.0	Brew has 1.13+; an old config has inline sniff/sniff_override_destination	Use references/singbox-client.json (1.13-compatible)
Mac sing-box: x509: ... despite known-good server config	Surge TUN intercepted the upstream and presented its own cert	Add tun-excluded-routes = <SERVER_IP>/32 in Surge [General]
Surge fallback never flips back to LAN after returning home	interval/timeout too long, or url-test target itself routed via the dead member	Lower interval to 30–60s; use a url-test target not affected by the failing branch
Public IP changed silently after a stop/start	No Static IP attached	Attach Lightsail Static IP and refresh client configs

Verification Checklist Before Reporting Done

Server:

• aws lightsail get-instance shows isStaticIp: True; IP matches every client config
• systemctl is-active xray → active; ss -tlnp | grep :443 shows xray
• journalctl -u xray --since "5 min ago" has NO REALITY: processed invalid connection lines

CT bridge:

• rc-service sing-box status → started
• ss -tlnp shows 0.0.0.0:10808 listening
• curl --socks5-hostname $CT_IP:10808 https://ipinfo.io/json from a third LAN host → returns SERVER_IP

Mac bridge:

• brew services list | grep sing-box → started
• lsof -nP -iTCP -sTCP:LISTEN | grep ':10808' → sing-box on 127.0.0.1
• curl --socks5-hostname 127.0.0.1:10808 https://ipinfo.io/json on the Mac → returns SERVER_IP
• Surge config tun-excluded-routes includes SERVER_IP/32

Surge:

• Config diff applied; timestamped backup exists
• Both AWS_JP_LAN and AWS_JP_Local show in Surge UI policy list
• AWS_JP fallback group reports both members healthy on LAN; member-down test flips to AWS_JP_Local within interval seconds
• Subscribers reload (⌘R) and the new policy names show up