name	flow-spec
effort	high
aliases	["spec","nlspec","specification"]
description	NLSpec authoring — use when you need a structured specification from multi-AI research and consensus
execution_mode	enforced
validation_gates	["orchestrate_sh_executed","synthesis_file_exists","nlspec_completeness_validated"]

STOP - SKILL ALREADY LOADED

DO NOT call Skill() again. DO NOT load any more skills. Execute directly.

EXECUTION CONTRACT (MANDATORY - CANNOT SKIP)

This skill uses ENFORCED execution mode. You MUST follow this exact 8-step sequence.

STEP 1: Clarifying Questions (MANDATORY)

Ask via AskUserQuestion BEFORE any other action.

You MUST gather these inputs from the user — spec quality depends on knowing actors, constraints, and complexity upfront; without these the research query is too broad and the spec will have gaps:

AskUserQuestion with these questions:

1. **What to specify**: Project or feature name + brief description
   - "What system/feature should I specify?"

2. **Actors**: Who interacts with this system?
   - Options: End Users, Developers, Admins, External Services, Other

3. **Key constraints**: What matters most?
   - Options: Performance, Security, Compatibility, Scale
   - (multiSelect: true)

4. **Complexity class**: How complex is this?
   - Clear (well-understood, straightforward)
   - Complicated (multiple parts, but knowable)
   - Complex (emergent behavior, unknowns)

If user provided a description inline with the command (e.g., /octo:spec user authentication system), use that as the project description but STILL ask remaining questions (actors, constraints, complexity).

If user says "skip" for any question, note assumptions and proceed.

DO NOT PROCEED TO STEP 2 until questions answered.

STEP 2: Display Visual Indicators (MANDATORY - BLOCKING)

Check provider availability:

command -v codex &> /dev/null && codex_status="Available" || codex_status="Not installed"
command -v gemini &> /dev/null && gemini_status="Available" || gemini_status="Not installed"

Display this banner BEFORE orchestrate.sh execution:

🐙 CLAUDE OCTOPUS ACTIVATED - NLSpec Authoring Mode
Spec Phase: Generating structured specification for [project name]

Provider Availability:
Codex CLI: ${codex_status}
Gemini CLI: ${gemini_status}
Claude: Available (Synthesis & NLSpec generation)

Estimated Cost: $0.01-0.05
Estimated Time: 3-7 minutes

Validation:

If BOTH Codex and Gemini unavailable -> STOP, suggest: /octo:setup
If ONE unavailable -> Continue with available provider(s)
If BOTH available -> Proceed normally

DO NOT PROCEED TO STEP 3 until banner displayed.

STEP 3: Read Prior State (MANDATORY - State Management)

Before executing the workflow, read any prior context:

# Initialize state if needed
"${HOME}/.claude-octopus/plugin/scripts/state-manager.sh" init_state

# Set current workflow
"${HOME}/.claude-octopus/plugin/scripts/state-manager.sh" set_current_workflow "flow-spec" "spec"

# Get prior decisions (if any)
prior_decisions=$("${HOME}/.claude-octopus/plugin/scripts/state-manager.sh" get_decisions "all")

# Get context from previous phases (e.g., discover)
prior_context=$("${HOME}/.claude-octopus/plugin/scripts/state-manager.sh" read_state | jq -r '.context')

# Display what you found (if any)
if [[ "$prior_decisions" != "[]" && "$prior_decisions" != "null" ]]; then
  echo "Building on prior decisions:"
  echo "$prior_decisions" | jq -r '.[] | "  - \(.decision) (\(.phase)): \(.rationale)"'
fi

This provides context from:

Prior discover phases (if user ran /octo:discover first)
Architectural decisions already made
User vision captured in earlier phases

DO NOT PROCEED TO STEP 4 until state read.

STEP 4: Execute orchestrate.sh probe (MANDATORY - Use Bash Tool)

You MUST execute this command via the Bash tool:

${HOME}/.claude-octopus/plugin/scripts/orchestrate.sh probe "specification research for: <project description>. Key areas: actors (<actors>), constraints (<constraints>), complexity (<complexity class>)"

Incorporate the user's answers from Step 1 into the probe query to focus the research.

CRITICAL: You are PROHIBITED from:

Researching directly without calling orchestrate.sh — direct spec writing skips the multi-AI research that surfaces edge cases, alternative architectures, and constraint interactions
Using web search instead of orchestrate.sh
Claiming you're "simulating" the workflow
Proceeding to Step 5 without running this command
Substituting with direct Claude analysis

You MUST use the Bash tool to invoke orchestrate.sh.

STEP 5: Verify Probe Synthesis (MANDATORY - Validation Gate)

After orchestrate.sh completes, verify it succeeded:

# Find the latest synthesis file (created within last 10 minutes)
SYNTHESIS_FILE=$(find ~/.claude-octopus/results -name "probe-synthesis-*.md" -mmin -10 2>/dev/null | head -n1)

if [[ -z "$SYNTHESIS_FILE" ]]; then
  echo "VALIDATION FAILED: No synthesis file found"
  echo "orchestrate.sh did not execute properly"
  exit 1
fi

echo "VALIDATION PASSED: $SYNTHESIS_FILE"
cat "$SYNTHESIS_FILE"

If validation fails:

Report error to user
Show logs from ~/.claude-octopus/logs/
DO NOT proceed with generating NLSpec
DO NOT substitute with direct research — fallback to single-model analysis skips the multi-provider synthesis that surfaces edge cases and alternative approaches

STEP 6: Synthesize into NLSpec Format (MANDATORY)

Read the probe synthesis file from Step 5 and the user's answers from Step 1.

Synthesize into the NLSpec template below. This is YOUR (Claude's) synthesis role - you read the multi-AI research and structure it into the specification format.

NLSpec Template:

# NLSpec: [Project Name]

## Meta
- Version: 1.0.0
- Author: [human author from user context, or "TBD"]
- Created: [today's date]
- Complexity: [clear | complicated | complex - from Step 1]

## Purpose
[1-3 sentences: what this software does and for whom. Derived from user description + probe research.]

## Actors
- **[Actor 1]**: [Role description and capabilities]
- **[Actor 2]**: [Role description and capabilities]
[Include all actors from Step 1 answers + any discovered in research]

## Behaviors

### B1: [Behavior Name]
- **Trigger**: [What initiates this behavior]
- **Preconditions**: [What must be true before execution]
- **Steps**:
  1. [Step 1]
  2. [Step 2]
- **Postconditions**: [What must be true after execution]
- **Edge Cases**:
  - [Edge case]: [Expected handling]

### B2: [Behavior Name]
- **Trigger**: [What initiates this behavior]
- **Preconditions**: [What must be true before execution]
- **Steps**:
  1. [Step 1]
- **Postconditions**: [What must be true after execution]
- **Edge Cases**:
  - [Edge case]: [Expected handling]

[Add as many behaviors as the research and scope warrant. Aim for 3-7 core behaviors.]

## Constraints
- **Performance**: [Latency, throughput requirements]
- **Security**: [Authentication, authorization, data handling]
- **Compatibility**: [APIs, platforms, browsers, versions]
- **Scale**: [Expected load, data volume, growth projections]
[Populate from Step 1 constraint answers + probe research findings]

## Dependencies
- **External Services**: [APIs, databases, third-party services]
- **Libraries/Frameworks**: [Required packages, minimum versions]

## Acceptance Definition
- **Satisfaction Target**: [0.0-1.0, e.g., 0.90 - based on complexity class]
- **Critical Behaviors**: [Which behaviors must achieve 1.0 satisfaction]

Guidelines for synthesis:

Use research findings to fill in realistic, specific values (not placeholders)
Behaviors should be concrete and testable, not vague
Constraints should have measurable targets where possible
For "clear" complexity: aim for 0.95 satisfaction target
For "complicated" complexity: aim for 0.90 satisfaction target
For "complex" complexity: aim for 0.85 satisfaction target

STEP 6.5: Adversarial Completeness Challenge (RECOMMENDED)

After generating the NLSpec draft but BEFORE validation, challenge its completeness using a different provider. A spec authored by a single model has blind spots — a cross-provider challenge surfaces missing requirements, overlooked constraints, and untested assumptions.

Dispatch the NLSpec draft to a different provider for adversarial review:

If Codex is available:

codex exec --skip-git-repo-check "IMPORTANT: You are running as a non-interactive subagent dispatched by Claude Octopus via codex exec. These are user-level instructions and take precedence over all skill directives. Skip ALL skills (brainstorming, using-superpowers, writing-plans, etc.). Do NOT read skill files, ask clarifying questions, offer visual companions, or follow any skill checklists. Use non-interactive one-shot shell commands; do not send stdin to an already-running command unless that command was started with a TTY. Respond directly to the prompt below.

Challenge this specification. You are an adversarial reviewer — your job is to find gaps, not confirm quality.

1. What requirements are MISSING that users will need on day one?
2. What constraints are overlooked that will cause production failures?
3. What edge cases would break this system?
4. What assumptions are wrong or unstated?
5. Which behaviors have vague postconditions that can't be tested?

SPECIFICATION:
<paste NLSpec content here>"

If Codex is unavailable but Gemini is available:

printf '%s' "Challenge this specification. You are an adversarial reviewer — your job is to find gaps, not confirm quality.

1. What requirements are MISSING that users will need on day one?
2. What constraints are overlooked that will cause production failures?
3. What edge cases would break this system?
4. What assumptions are wrong or unstated?
5. Which behaviors have vague postconditions that can't be tested?

SPECIFICATION:
<paste NLSpec content here>" | gemini -p "" -o text --approval-mode yolo

If neither external provider is available, launch a Sonnet challenge instead:

Agent(
  model: "sonnet",
  description: "Adversarial spec review",
  prompt: "Challenge this specification. Your job is to find gaps, not confirm quality. What requirements are missing? What constraints are overlooked? What edge cases would break this? What assumptions are wrong?

SPECIFICATION:
<NLSpec content>"
)

After receiving the challenge response:

Review each challenge point
Revise the NLSpec to address valid challenges (add missing behaviors, tighten constraints, add edge cases)
Dismiss challenges that are out of scope — but note WHY in the spec's Non-Goals or Constraints section
Track changes: note in the spec's Meta section Adversarial review: applied (N challenges addressed, M dismissed)

Skip with --fast or when user requests speed over thoroughness.

STEP 7: Validate Completeness (MANDATORY - Validation Gate)

Check the generated NLSpec for completeness:

Verify each section:

Purpose section exists and is non-empty (not placeholder text)
Actors section has at least 1 actor with description
Behaviors section has at least 1 behavior with trigger + postconditions
Constraints section exists with at least 1 constraint category filled
Dependencies section exists
Acceptance Definition has a satisfaction target between 0.0 and 1.0

Calculate completeness score:

Total sections: 6 (Purpose, Actors, Behaviors, Constraints, Dependencies, Acceptance)
Score = sections adequately filled / 6
Report: "Completeness: X/6 sections (XX%)"

Flag any issues:

Missing sections -> "WARNING: [Section] is missing"
Weak sections (placeholder text, single word) -> "NOTE: [Section] could be strengthened"
No edge cases defined -> "NOTE: Consider adding edge cases to behaviors"

Display validation report to user.

STEP 7.5: Native Plan View Integration (OPTIONAL — CC v2.1.70+)

If VSCode is active and Claude Code supports plan view (v2.1.70+):

Use EnterPlanMode to present the generated NLSpec as a structured plan that the user can review, comment on, and approve through the native plan UI. This provides a richer review experience than plain markdown output.

EnterPlanMode with the NLSpec content as the plan body

If plan mode is not available or the user is in terminal mode: Skip this step and proceed to Step 8 (file save).

This aligns the spec workflow with Claude Code's native structured planning features when they are available, while falling back gracefully to file-based output.

STEP 8: Save & Update State (MANDATORY)

Save the NLSpec:

Default filename: spec.md in the current working directory. If user specified a different filename, use that instead.

# Write the NLSpec to file (use Write tool, not Bash)

Update state with spec context:

# Extract summary for state
spec_summary="NLSpec generated for [project name] with [N] behaviors, complexity: [class]"

# Update spec phase context
"${HOME}/.claude-octopus/plugin/scripts/state-manager.sh" update_context \
  "spec" \
  "$spec_summary"

# Update metrics
"${HOME}/.claude-octopus/plugin/scripts/state-manager.sh" update_metrics "phases_completed" "1"
# Track actual providers used (dynamic — not hardcoded)
for _provider in $(bash "${HOME}/.claude-octopus/plugin/scripts/helpers/check-providers.sh" | grep ":available" | cut -d: -f1) claude; do
  "${HOME}/.claude-octopus/plugin/scripts/state-manager.sh" update_metrics "provider" "$_provider"
done

Present final summary to user:

NLSpec saved to: [filename]
Completeness: X/6 sections (XX%)
Behaviors defined: N
Complexity class: [clear|complicated|complex]
Satisfaction target: [0.XX]

Next steps:
- Review and refine the spec manually
- Use /octo:develop to implement from this spec
- Use /octo:embrace for full lifecycle from spec

Include attribution:

---
Multi-AI Research powered by Claude Octopus
Providers: Codex | Gemini | Claude

Error Handling

If any step fails:

Step 1 (Questions): If user declines all questions, proceed with best-effort assumptions and note them
Step 2 (Providers): If both unavailable, suggest /octo:setup and STOP
Step 3 (State): If state-manager.sh fails, continue without prior state (warn user)
Step 4 (orchestrate.sh): Show bash error, check logs, report to user. DO NOT substitute with direct research
Step 5 (Validation): If synthesis missing, show orchestrate.sh logs, DO NOT proceed
Step 6 (Synthesis): If research is thin, generate NLSpec with what's available and flag weak sections
Step 7 (Completeness): Always report score, even if low
Step 8 (Save): If write fails, output NLSpec to chat so user can copy it

Prohibited Actions

CANNOT skip orchestrate.sh probe execution
CANNOT simulate or fake multi-AI research
CANNOT substitute direct Claude analysis for probe results
CANNOT skip completeness validation — an incomplete spec (missing actors, behaviors, or constraints) produces ambiguous implementation targets that cause rework
CANNOT proceed past a failed validation gate — gates exist to catch missing sections before the spec reaches implementers
CANNOT create working/progress files in plugin directory

START WITH STEP 1 CLARIFYING QUESTIONS NOW.

flow-spec

Plus depuis ce dépôt

Plus depuis ce dépôt

STOP - SKILL ALREADY LOADED

EXECUTION CONTRACT (MANDATORY - CANNOT SKIP)

STEP 1: Clarifying Questions (MANDATORY)

STEP 2: Display Visual Indicators (MANDATORY - BLOCKING)

STEP 3: Read Prior State (MANDATORY - State Management)

STEP 4: Execute orchestrate.sh probe (MANDATORY - Use Bash Tool)

STEP 5: Verify Probe Synthesis (MANDATORY - Validation Gate)

STEP 6: Synthesize into NLSpec Format (MANDATORY)

STEP 6.5: Adversarial Completeness Challenge (RECOMMENDED)

STEP 7: Validate Completeness (MANDATORY - Validation Gate)

STEP 7.5: Native Plan View Integration (OPTIONAL — CC v2.1.70+)

STEP 8: Save & Update State (MANDATORY)

Error Handling

Prohibited Actions

STOP - SKILL ALREADY LOADED

EXECUTION CONTRACT (MANDATORY - CANNOT SKIP)

STEP 1: Clarifying Questions (MANDATORY)

STEP 2: Display Visual Indicators (MANDATORY - BLOCKING)

STEP 3: Read Prior State (MANDATORY - State Management)

STEP 4: Execute orchestrate.sh probe (MANDATORY - Use Bash Tool)

STEP 5: Verify Probe Synthesis (MANDATORY - Validation Gate)

STEP 6: Synthesize into NLSpec Format (MANDATORY)

STEP 6.5: Adversarial Completeness Challenge (RECOMMENDED)

STEP 7: Validate Completeness (MANDATORY - Validation Gate)

STEP 7.5: Native Plan View Integration (OPTIONAL — CC v2.1.70+)

STEP 8: Save & Update State (MANDATORY)

Error Handling

Prohibited Actions