swpilotcli-feature-chamfer-circular-hole

name	swpilotcli-feature-chamfer-circular-hole
description	Apply an angle-distance chamfer to circular hole edge(s) in the active SolidWorks part. Targets full circular edges by diameter and can optionally limit selection to the nearest matching edge to a supplied world coordinate. Use for chamfering drilled/cut hole openings such as 0.5 C x 45 deg center-hole chamfers.

swpilotcli-feature-chamfer-circular-hole

Apply an angle-distance chamfer to circular hole edge(s) in the active SolidWorks part.

Prerequisites

• SolidWorks is running with an active Part document
• The target hole already exists as circular edge geometry

Usage

dotnet run --project ./sup_tools/swpilotcli-feature-chamfer-circular-hole/scripts/ChamferCircularHole/ChamferCircularHole.csproj -- [diameter_mm] [chamfer_mm] [angle_deg] [nearest_x,nearest_y,nearest_z]

Arguments

Arg	Description
diameter_mm	Target hole diameter in millimetres. Default: 10
chamfer_mm	Chamfer distance in millimetres. Default: 0.5
angle_deg	Chamfer angle in degrees. Default: 45
nearest_x,nearest_y,nearest_z	Optional world coordinate in millimetres. If supplied, only the nearest matching circular edge is chamfered.

Examples

# Apply 0.5 C x 45 deg chamfer to all 10 mm circular hole openings
dotnet run --project ./sup_tools/swpilotcli-feature-chamfer-circular-hole/scripts/ChamferCircularHole/ChamferCircularHole.csproj

# Apply to the matching circular edge nearest the top center of a 40 x 40 x 10 block
dotnet run --project ./sup_tools/swpilotcli-feature-chamfer-circular-hole/scripts/ChamferCircularHole/ChamferCircularHole.csproj -- 10 0.5 45 20,20,10

How it works

1. Traverses visible solid bodies in the active part
2. Finds full circular edges matching the requested diameter
3. Optionally keeps only the matching edge nearest the supplied world coordinate
4. Selects the target edge(s)
5. Calls FeatureChamferType with swChamferAngleDistance
6. Rebuilds and redraws the model

Notes

• Without nearest_x,nearest_y,nearest_z, every matching full circular edge is chamfered.
• Use the coordinate option when the part has multiple holes of the same diameter.